3236 scott boulevard santa clara, california 95054 phone: (408) 986-5060 fax: (408) 986-5095 CMM6025-AH features ? 0.25 to 6.0 ghz frequency range ? 43 dbm output ip3 ? 1.7 db noise figure ? 18.0 db gain ? 25 dbm p1db ? lga package ? single power supply ? single input matching applications ? wireless local loop transmit and receive ? unii transmit and receive ? dual band 802.11 wlan description the CMM6025-AH is a high dynamic range amplifi- er designed for applications operating within the 0.25 to 6.0 ghz frequency range. it is an ideal solution for numerous transmit and receive functions in wireless local loop (wll) and unii applications where high linearity is required. the amplifier has the flexibility of being optimized for a number of wireless applications. it is an ideal solution when used as a driver amplifier in applications including cel- lular and pcs (personal communications service) operating from 0.8 to 2.2 ghz; mmds (multichannel multipoint distrib- ution systems) operating from 2.2 to 2.7 ghz; wlan (wire- less lan) operating at 2.4 ghz; wll (wireless local loop) operating at 3.5 ghz; and hiperlan (high performance lan) and u-nii (unlicensed national information infrastruc- ture) operating from 5.0 to 6.0 ghz. the CMM6025-AH is packaged in a low-cost, space efficient, land grid array (lga) package which provides excellent electrical stability and low thermal resistance. all devices are 100% rf and dc tested. with single input match- ing the part simplifies design by keeping board space and cost to a minimum. 0.25 to 6.0 ghz high dynamic range amplifier advanced product information april 2002 (1 of 4) functional block diagram absolute maximum ratings parameter rating parameter rating parameter rating supply voltage +6.0 v storage temperature -40? to +125? operating temperature -40? to +85? rf input power +13 dbm junction temperature 150? parameter condition min typ max units frequency range 0.25 6.0 ghz gain externally matched 17.0 18.5 19.5 db input return loss externally matched -24 -10 db output ip3 38 41 45 dbm noise figure 1.5 1.7 1.85 db output p1db 25.0 25.5 26.0 dbm operating current range 350 370 400 ma supply voltage 5.0 v electrical characteristics unless otherwise specified, the following specifications are guaranteed at room temperature in a celeritek test fixture. notes: 1. t = 22?, vdd = 5.0, frequency = 800 mhz, 50 ohm system 2. thermal resistance = 50?/w. operation of this device above any of these parameters may cause damage.
3236 scott boulevard, santa clara, california 95054 phone: (408) 986-5060 fax: (408) 986-5095 CMM6025-AH advanced pr oduct information - april 2002 (2 of 4) ip3 measured with 2 tones at an output power of 5 dbm/tone separated by 10 mhz gain, input return loss and output return loss vs frequency application circuit (2.1 ghz) typical performance (50 ohm system) frequency 2.1 ghz gain 15.8 db input return loss -14 db output return loss -16.5 db oip3 40 dbm noise figure 2.95 db bias vds = 5v, id = 370 ma typical performance rf out uuuu c4 1.8 pf c5 100 pf l2 22 nh vcc 5v c3 1.0 pf c2 2.7 pf rf in 2.1 ghz CMM6025-AH t1 50 ? 33 output matching network input matching network circuit board parts list part reference type designator description inductor l1 0603, 22 nh capacitor c1, c5 smd 0805 npo, 100 pf capacitor c2 0603, 2.7 pf capacitor c3 0603, 1.0 pf capacitor c4 smd 0603, 50v 0.1 pf 1.8 pf c1 100 pf
3236 scott boulevard santa clara, california 95054 phone: (408) 986-5060 fax: (408) 986-5095 CMM6025-AH advanced product information - april 2002 (3 of 4) rf out uuuu c4 100 pf l1 6.8 nh vcc 5v c3 1.0 pf c2 2.7 pf rf in 5.8 ghz CMM6025-AH t1 50 ? 110 t1 50 ? 125 application circuit (5.8 ghz) typical performance gain vs temperature @ 5.8 ghz ip3 vs temperature @ 5.8 ghz typical performance (50 ohm system) frequency 5.8 ghz gain 10.5 db input return loss -11.5 db output return loss -17.2 db oip3 40 dbm noise figure 3.8 db bias vds = 5v, ids = 370 ma ip3 measured with 2 tones at an output power of 5 dbm/tone separated by 10 mhz gain, input return loss and output return loss vs frequency input matching network circuit board parts list part reference type designator description inductor l1 0603, 6.8 nh capacitor c1, c4 smd 0805 npo, 100 pf capacitor c2 smd 0805, 2.7 pf capacitor c3 0603, 1.0 pf c1 100 pf
3236 scott boulevard, santa clara, california 95054 phone: (408) 986-5060 fax: (408) 986-5095 CMM6025-AH advanced pr oduct information - april 2002 (4 of 4) physical dimensions mounting recommendation dimensions in millimeters/inches board substrate: ro-4003 thickness = 31 mil ordering information the CMM6025-AHis available in a surface-mount lga package and devices are available in tape and reel. part number for ordering package CMM6025-AH lga surface-mount power package in tape and reel pb-CMM6025-AH evaluation board with sma connectors for CMM6025-AH celeritek reserves the right to make changes without further notice to any products herein. celeritek makes no warranty, repres entation or guarantee regarding the suitability of its products for any particular purpose, nor does celeritek assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. ?ypical?parameters can and do vary in different applications. all operating parameters, including ?ypicals?must be validated for each customer application by customer? technical experts. celeritek doe s not convey any license under its patent rights nor the rights of others. celeritek products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the celeritek p roduct could create a situation where personal injury or death may occur. should buyer purchase or use celeritek products for any such unintended or unauthorized application, buyer shall indemnify and hold celeritek and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expens es, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that celeritek was negligent regarding the design or manufacture of the part. celeritek is a registered trademark of celeritek, inc. celeritek, inc. is an e qual opportunity/affirmative action employer.
|
