View SIZ340DT_8390667.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SIZ340DT www.vishay.com vishay siliconix s14-0611-rev. b, 24-mar-14 1 document number: 62877 for technical questions, contact: pmostechsupport @vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dual n-channel 30 v (d-s) mosfet ordering information: SIZ340DT-t1-ge3 (lead (pb)-free and halogen-free) features ?powerpair ? optimizes high-side and low-side mosfets for synchronous buck converters ? trenchfet ? power mosfets ? 100 % r g and uis tested ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications ? synchronous buck - battery charging - computer system power - graphic cards ?pol notes a. package limited. b. surface mounted on 1" x 1" fr4 board. c. t = 10 s. d. see solder profile ( www.vishay.com/doc?73257 ). the powerpair 3 x 3 is a leadless package. the end of the lead terminal is exposed copper (not plated) as a result of the singulation process in manufactu ring. a solder fillet at the exposed copper tip cannot be guara nteed and is not required to ensure adequate bo ttom side solder interconnection. e. rework conditions: manual soldering with a soldering iron is not recommended for leadless components. product summary v ds (v) r ds(on) ( ) max. i d (a) q g (typ.) channel-1 30 0.0095 at v gs = 10 v 30 a 5.6 nc 0.0137 at v gs = 4.5 v 22 channel-2 30 0.0051 at v gs = 10 v 40 a 10.1 nc 0.0070 at v gs = 4.5 v 40 a powerpair ? 3 x 3 top view 1 3 mm 3 mm 1 3 m m 3 mm bottom view 4 d 1 1 g 1 2 d 1 3 d 1 s 2 5 g 2 8 s 2 7 s 2 6 d 1 s 1 /d 2 (pin 9) d 1 s 2 n-channel 2 mosfet n-channel 1 mosfet g 1 s 1 /d 2 g 2 absolute maximum ratings (t a = 25 c, unless otherwise noted) parameter symbol ch annel-1 channel-2 unit drain-source voltage v ds 30 v gate-source voltage v gs +20, -16 continuous drain current (t j = 150 c) t c = 25 c i d 30 a 40 a a t c = 70 c 26.5 40 a t a = 25 c 15.6 b,c 22.6 b,c t a = 70 c 12.4 b,c 18.1 b,c pulsed drain current (t = 100 s) i dm 100 150 continuous source drain diode current t c = 25 c i s 13.9 26 t a = 25 c 3.1 b,c 3.5 b,c avalanche current l = 0.1 mh i as 10 15 single pulse avalanche energy e as 511mj maximum power dissipation t c = 25 c p d 16.7 31 w t c = 70 c 10.7 20 t a = 25 c 3.7 b,c 4.2 b,c t a = 70 c 2.4 b,c 2.7 b,c operating junction and storage temperature range t j , t stg -55 to 150 c soldering recommendations (peak temperature) d,e 260
SIZ340DT www.vishay.com vishay siliconix s14-0611-rev. b, 24-mar-14 2 document number: 62877 for technical questions, contact: pmostechsupport @vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes a. surface mounted on 1" x 1" fr4 board. b. maximum under steady state co nditions is 69 c/w for channe l-1 and 64 c/w for channel-2. thermal resistance ratings parameter symbol channel-1 channel-2 unit typ. max. typ. max. maximum junction-to-ambient a,b t 10 s r thja 27 34 24 30 c/w maximum junction-to-case (drain) steady state r thjc 67.53.24 specifications (t j = 25 c, unless otherwise noted) parameter symbol test conditions min. typ. max. unit static drain-source breakdown voltage v ds v gs = 0 v, i d = 250 a ch-1 30 - - v ch-2 30 - - v ds temperature coefficient v ds /t j i d = 250 a ch-1 - 18.4 - mv/c ch-2 - 30 - v gs(th) temperature coefficient v gs(th )/t j i d = 250 a ch-1 - -4.3 - ch-2 - -5 - gate threshold voltage v gs(th) v ds = v gs , i d = 250 a ch-1 1 - 2.4 v ch-2 1 - 2.4 gate source leakage i gss v ds =0 v, v gs = +20 v, -16 v ch-1 - - 100 na ch-2 - - 100 zero gate voltage drain current i dss v ds = 30 v, v gs = 0 v ch-1 - - 1 a ch-2 - - 1 v ds = 30 v, v gs =0 v, t j = 55 c ch-1 - - 5 ch-2 - - 5 on-state drain current b i d(on) v ds 5 v,v gs = 10 v ch-1 10 - - a ch-2 10 - - drain-source on-s tate resistance b r ds(on) v gs = 10 v, i d = 15.6 a ch-1 - 0.0079 0.0095 v gs = 10 v, i d = 20 a ch-2 - 0.0042 0.0051 v gs = 4.5 v, i d = 13 a ch-1 - 0.0110 0.0137 v gs = 4.5 v, i d = 20 a ch-2 - 0.0058 0.0070 forward transconductance b g fs v ds = 15 v, i d = 15.6 a ch-1 - 37 - s v ds = 15 v, i d = 20 a ch-2 - 60 - dynamic a input capacitance c iss channel-1 v ds = 15 v, v gs = 0 v, f = 1 mhz channel-2 v ds =15 v, v gs = 0 v, f = 1 mhz ch-1 - 760 - pf ch-2 - 1552 - output capacitance c oss ch-1 - 250 - ch-2 - 450 - reverse transfer capacitance c rss ch-1 - 32 - ch-2 - 40 - c rss / c iss ratio ch-1 0.042 - 0.084 - ch-2 0.025 - 0.050 total gate charge q g v ds = 15 v, v gs = 10 v, i d = 15.6 a ch-1 - 12.3 19 nc v ds = 15 v, v gs = 10 v, i d = 20 a ch-2 - 22.6 35 channel-1 v ds = 15 v,v gs = 4.5 v, i d = 15.6 a channel-2 v ds = 15 v,v gs = 4.5 v, i d = 20 a ch-1 - 5.6 9 ch-2 - 10.1 16 gate-source charge q gs ch-1 - 2.3 - ch-2 - 4.2 - gate-drain charge q gd ch-1 - 1 - ch-2 - 1.8 - output charge q oss ch-1 - 6.6 - ch-2 - 12.4 - gate resistance r g f = 1 mhz ch-1 0.3 1.7 3.4 ch-2 0.3 1.3 2.6
SIZ340DT www.vishay.com vishay siliconix s14-0611-rev. b, 24-mar-14 3 document number: 62877 for technical questions, contact: pmostechsupport @vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes a. guaranteed by design, not su bject to production testing. b. pulse test; pulse width 300 s, duty cycle 2 %. stresses beyond those listed under absolute maximum ratings ma y cause permanent damage to th e device. these are stress rating s only, and functional operation of the device at these or any other conditions beyond those in dicated in the operational sectio ns of the specifications is not implied. exposure to absolute maximum rating conditions for extended pe riods may affect device reliability. dynamic a turn-on delay time t d(on) channel-1 v dd = 15 v, r l = 1.5 i d ? 10 a, v gen = 4.5 v, r g = 1 chan nel-2 v dd =15 v, r l = 1.5 i d ? 10 a, v gen = 4.5 v, r g = 1 ch-1 - 13 20 ns ch-2 - 22 33 rise time t r ch-1 - 55 85 ch-2 - 82 123 turn-off delay time t d(off) ch-1 - 16 25 ch-2 - 20 30 fall time t f ch-1 - 7 14 ch-2 - 7 14 turn-on delay time t d(on) channel-1 v dd = 15 v, r l = 1.5 i d ? 10 a, v gen = 10 v, r g = 1 channel-2 v dd =15 v, r l = 1.5 i d ? 10 a, v gen = 10 v, r g = 1 ch-1 - 8 16 ch-2 - 10 20 rise time t r ch-1 - 11 20 ch-2 - 12 20 turn-off delay time t d(off) ch-1 - 12 20 ch-2 - 16 30 fall time t f ch-1 - 7 15 ch-2 - 7 12 drain-source body diode characteristics continuous source-drain diode current i s t c = 25 c ch-1 - - 13.9 a ch-2 - - 25.8 pulse diode forward current (t = 100 s) i sm ch-1 - - 100 ch-2 - - 150 body diode voltage v sd i s = 10 a, v gs = 0 v ch-1 - 0.8 1.2 v ch-2 - 0.82 1.2 body diode reverse recovery time t rr channel-1 i f = 10 a, di/dt = 100 a/s, t j = 25 c channel-2 i f = 10 a, di/dt = 100 a/s, t j = 25 c ch-1 - 20 35 ns ch-2 - 26 40 body diode reverse recovery charge q rr ch-1 - 9 20 nc ch-2 - 20 30 reverse recovery fall time t a ch-1 - 11.5 - ns ch-2 - 18.1 - reverse recovery rise time t b ch-1 - 8.5 - ch-2 - 7.9 - specifications (t j = 25 c, unless otherwise noted) parameter symbol test conditions min. typ. max. unit
SIZ340DT www.vishay.com vishay siliconix s14-0611-rev. b, 24-mar-14 4 document number: 62877 for technical questions, contact: pmostechsupport @vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 channel-1 typical characteristics (25 c, unless otherwise noted) output characteristics on-resistance vs. drain current gate charge transfer characteristics capacitance on-resistance vs. junction temperature 0 10 20 30 40 50 0 0.5 1 1.5 2 i d - drain current (a) v d s - drain-to- s ource voltage (v) v gs = 10 v thru 4 v v gs = 3 v v gs = 2 v 0 0.005 0.010 0.015 0 10 20 30 40 50 r d s (on) - on-re s i s tance () i d - drain current (a) v gs = 4.5 v v gs = 10 v 0.020 0 2 4 6 8 10 0 2.6 5.2 7.8 10.4 13 v gs - g ate-to- s ource voltage (v) q g - total g ate charge (nc) v d s = 24 v v d s = 15 v v d s = 8 v i d = 15.6 a 0 1 2 3 4 5 0.6 1.2 1.8 2.4 3 i d - drain current (a) v gs - g ate-to- s ource voltage (v) t c = 25 c t c = 125 c t c = - 55 c 0 0 180 360 540 720 900 0 5 10 15 20 c - capacitance (pf) v d s - drain-to- s ource voltage (v) c i ss c o ss c r ss 0.7 0.95 1.2 1.45 1.7 - 50 - 25 0 25 50 75 100 125 150 r d s (on) - on-re s i s tance (normalized) t j - junction temperature ( c) i d = 15.6 a v gs = 10 v v gs = 4.5 v 1 0
SIZ340DT www.vishay.com vishay siliconix s14-0611-rev. b, 24-mar-14 5 document number: 62877 for technical questions, contact: pmostechsupport @vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 channel-1 typical characteristics (25 c, unless otherwise noted) source-drain diode forward voltage threshold voltage on-resistance vs. gate-to-source voltage single pulse power safe operating area, junction-to-ambient 0.1 1 10 100 0.0 0.2 0.4 0.6 0.8 1.0 1.2 i s - s ource current (a) v s d - s ource-to-drain voltage (v) t j = 150 c t j = 25 c 0.9 1.1 1.3 1.5 1.7 - 50 - 25 0 25 50 75 100 125 150 v gs (th) (v) t j - temperature ( c) i d = 250 a 0 0.005 0.01 0.015 0.02 2 4 6 8 10 r d s (on) - on-re s i s tance () v gs - g ate-to- s ource voltage (v) t j = 125 c t j = 25 c i d = 15.6 a 0 10 20 30 40 50 0.001 0.01 0.1 1 10 100 1000 power (w) time ( s ) 0.01 0.1 1 10 100 0.1 1 10 100 i d - drain current (a) v d s - drain-to- s ource voltage (v) * v gs > minimum v gs at which r d s (on) i s s pecified 100 m s limited by r d s (on) * 1 m s t a = 25 c s ingle pul s e bvd ss limited 10 m s 100 s dc 10 s 1 s 1000
SIZ340DT www.vishay.com vishay siliconix s14-0611-rev. b, 24-mar-14 6 document number: 62877 for technical questions, contact: pmostechsupport @vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 channel-1 typical characteristics (25 c, unless otherwise noted) current derating* power, junction-to-case power, junction-to-ambient * the power di ssipation p d is based on t j (max.) = 150 c, using junction-to-case thermal resistance, and is more useful in settling the upper dissipation limit for cases where additional heatsinking is used. it is used to determine the cu rrent rating, when this rating falls below the package limit. 0 10 20 30 40 0 25 50 75 100 125 150 i d - drain current (a) t c - ca s e temperature ( c) package limited 0 5 10 15 20 0 25 50 75 100 125 150 power (w) t c - ca s e temperature ( c) 0.0 0.6 1.1 1.7 2.2 0 25 50 75 100 125 150 power (w) t a - ambient temperature ( c)
SIZ340DT www.vishay.com vishay siliconix s14-0611-rev. b, 24-mar-14 7 document number: 62877 for technical questions, contact: pmostechsupport @vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 channel-1 typical characteristics (25 c, unless otherwise noted) normalized thermal transient impedance, junction-to-ambient normalized thermal transient impedance, junction-to-case 0.01 0.1 1 0.0001 0.001 0.01 0.1 1 10 100 1000 normalized effective tran s ient thermal impedance sq uare wave pul s e duration ( s ) duty cycle = 0.5 0.2 0.1 0.05 0.02 s ingle pul s e t 1 t 2 notes: p dm 1. duty cycle, d = 2. per unit base = r thja = 69 c/w 3. t jm -t a =p dm z thja (t) t 1 t 2 4. surface mounted 0.1 1 0.0001 0.001 0.01 0.1 1 normalized effective tran s ient thermal impedance sq uare wave pul s e duration ( s ) duty cycle = 0.5 0.2 0.1 0.05 0.02 s ingle pul s e
SIZ340DT www.vishay.com vishay siliconix s14-0611-rev. b, 24-mar-14 8 document number: 62877 for technical questions, contact: pmostechsupport @vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 channel-2 typical characteristics (25 c, unless otherwise noted) output characteristics on-resistance vs. drain current gate charge transfer characteristics capacitance on-resistance vs. junction temperature 0 15 30 45 60 0 0.5 1 1.5 2 i d - drain current (a) v d s - drain-to- s ource voltage (v) v gs = 10 v thru 4 v v gs = 3 v 0.002 0.004 0.006 0.008 0.010 0 15 30 45 60 r d s (on) - on-re s i s tance ( ) i d - drain current (a) v gs gs = 10 v 0 2 4 6 8 10 0 6 12 18 24 v gs - g ate-to- s ource voltage (v) q g - total g ate charge (nc) v d s = 24 v v d s = 8 v v d s =15 v i d = 20 a 0 1 2 3 4 5 0.6 1.2 1.8 2.4 3 i d - drain current (a) v gs - g ate-to- s ource voltage (v) t c = 25 c t c = 125 c t c = 0 - 55 c 0 450 900 1350 1800 0 6 12 18 24 30 c - capacitance (pf) v d s - drain-to- s ource voltage (v) c i ss c o ss ss 0.7 0.95 1.2 1.45 1.7 - 50 - 25 0 25 50 75 100 125 150 r d s (on) - on-re s i s tance (normalized) t j - junction temperature ( c) i d = 20 a v gs = 10 v v gs = 4.5 v
SIZ340DT www.vishay.com vishay siliconix s14-0611-rev. b, 24-mar-14 9 document number: 62877 for technical questions, contact: pmostechsupport @vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 channel-2 typical characteristics (25 c, unless otherwise noted) source-drain diode forward voltage threshold voltage on-resistance vs. gate-to-source voltage single pulse power safe operating area, junction-to-ambient 0.1 1 10 100 0.0 0.2 0.4 0.6 0.8 1.0 1.2 i s - s ource current (a) v s d - s ource-to-drain voltage (v) t j = 150 c t j = 25 c 0.8 1.1 1.4 1.7 2 - 50 - 25 0 25 50 75 100 125 150 v gs (th) (v) t j - temperature ( c) i d = 250 a 0 0.005 0.010 0.015 0.020 2 4 6 8 10 r d s (on) - on-re s i s tance ( ) v gs - g ate-to- s ource voltage (v) t j = 125 c t j = 25 c i d = 20 a 0 10 20 30 40 50 0.001 0.01 0.1 1 10 100 1000 power (w) time ( s ) 0.01 0.1 1 10 100 1000 0.1 1 10 100 i d - drain current (a) v d s - drain-to- s ource voltage (v) * v gs > minimum v gs at which r d s (on) i s s pecified 100 m s limited by r d s (on) * 1 m s t a = 25 c s ingle pul s e bvd ss limited 10 m s 100 s 1 s dc 10 s
SIZ340DT www.vishay.com vishay siliconix s14-0611-rev. b, 24-mar-14 10 document number: 62877 for technical questions, contact: pmostechsupport @vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 channel-2 typical characteristics (25 c, unless otherwise noted) current derating* power, junction-to-case power, junction-to-ambient * the power di ssipation p d is based on t j (max.) = 150 c, using junction-to-case thermal resistance, and is more useful in settling the upper dissipation limit for cases where additional heatsinking is used. it is used to determine the cu rrent rating, when this rating falls below the package limit. 0 17 34 51 0 25 50 75 100 125 150 i d - drain current (a) t c - ca s e temperature ( c) 68 package limited 0 9.5 19 28.5 38 0 25 50 75 100 125 150 power (w) t c - ca s e temperature ( c) 0.0 0.7 1.4 2.1 2.8 0 25 50 75 100 125 150 power (w) t a - ambient temperature ( c)
SIZ340DT www.vishay.com vishay siliconix s14-0611-rev. b, 24-mar-14 11 document number: 62877 for technical questions, contact: pmostechsupport @vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 channel-2 typical characteristics (25 c, unless otherwise noted) normalized thermal transient impedance, junction-to-ambient normalized thermal transient impedance, junction-to-case vishay siliconix maintains worldw ide manufacturing ca pability. products may be manufactured at one of several qualified locatio ns. reliability da ta for silicon technology and package reliability represent a composite of all qu alified locations. for related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?62877 . 0.01 0.1 1 0.0001 0.001 0.01 0.1 1 10 100 1000 normalized effective tran s ient thermal impedance sq uare wave pul s e duration ( s ) duty cycle = 0.5 0.2 0.1 0.05 0.02 s ingle pul s e t 1 t 2 notes: p dm 1. duty cycle, d = 2. per unit base = r thja = 64 c/w 3. t jm -t a =p dm z thja (t) t 1 t 2 4. surface mounted 0.1 1 0.0001 0.001 0.01 0.1 1 normalized effective tran s ient thermal impedance sq uare wave pul s e duration ( s ) duty cycle = 0.5 0.2 0.1 0.05 0.02 s ingle pul s e
package information www.vishay.com vishay siliconix revison: 18-jun-12 1 document number: 67698 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 powerpair ? 3 x 3 case outline millimeters inches dim. min. nom. max. min. nom. max. a 0.70 0.75 0.80 0.028 0.030 0.031 a1 0.00 0.05 0.000 0.002 b 0.35 0.40 0.45 0.014 0.016 0.018 b1 0.20 0.25 0.38 0.008 0.010 0.015 c 0.18 0.20 0.23 0.007 0.008 0.009 d 2.90 3.00 3.10 0.114 0.118 0.122 d2 2.35 2.40 2.45 0.093 0.094 0.096 e 2.90 3.00 3.10 0.114 0.118 0.122 e1 0.94 0.99 1.04 0.037 0.039 0.041 e2 0.47 0.52 0.57 0.019 0.020 0.022 e 0.65 bsc 0.026 bsc k 0.25 typ. 0.010 typ. k1 0.35 typ. 0.014 typ. k2 0.30 typ. 0.012 typ. l 0.27 0.32 0.37 0.011 0.013 0.015 ecn: t12-0347-rev. c, 18-jun-12 dwg: 5998 note * indicates pin #1 orientation (optional) d e d 0.10 c 2x d 0.10 c 2x a l k2 k2 k e1 d2 k1 e2 b e a1 0.10 0.15 b1 c a f 0.10 c d 0.08 c * 1 2 3 4 8 7 6 5 1234 8765 c 9
document number: 63294 www.vishay.com revision: 25-may-11 1 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 pad pattern vishay siliconix recommended minimum pad for powerpair ? 3 x 3 dimen s ion s in millimeter s (inche s ) keep-out 3.5 mm x 3.5 mm for non terminating trace s recommended pad for powerpair 3 x 3 0.450 (0.018) 0.650 (0.026) 0.450 (0.018) 0.084 (0.003) 0.390 (0.015) 1.611 (0.063) 1.200 (0.047) 2.450 (0.096) 0.209 (0.008) 1.036 (0.041) 0.562 (0.022) 0.306 (0.012)
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.

▲Up To Search▲

Price & Availability of SIZ340DT

	To Download SIZ340DT Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .