ct10 series encapsulated molded switch tel: (401) 943.2686 | fax: (401) 942.0920 ct10 series fe ct10 is an encapsulated molded dry reed switch. it is single-pole, single throw (spst) type, having normally open ruthenium contacts. fe sensor is a double-ended type and may be actuated with an electromagnet, a per - manent magnet or a combination of both. fe device is designed for smd mounting and is available in three lead confgura - tions. * n ew ct10-g2 now 260 o c process temperature hardy. ct10 series features u i deal for smd pick and place u t ape and reel packaging u 10 w rating u r ugged encapsulation u e xcellent life and reliability u r ohs compliant u p roximity sensing u s ecurity alarm sensor u l evel sensor u fl ow sensor u p ulse counter applications model number ct10-xxxx-yy parameters units operating characteristics operate range at 10-40 release range at 3-35 electrical characteristics switched power (max) w 10 switched voltage dc (max) v 200 switched voltage ac, rms value (max) v 140 switched current dc (max) ma 500 switched current ac, rms value (max) ma 500 carry current dc (max) a 0.5 breakdown voltage (min) v 230 contact resistance (initial max) m 200 insulation resistance (min) m 10 6 environmental ratings storage temperature oc -40 to + 125 operating temperature oc -40 to + 125 vibration resistance g 10 shock resistance g 100 u at values measured using a philips 10jk coil. u surface mount component processing temperature model g1 & g2: 500f(260c) max for 1 minute dwell time; model g4 & a2: 439f(226c) max for 1 minute dwell time. u temperature measured on leads where lead exits molded package. notes new! ct10-g2 06242015 tel: (401) 943.2686 | fax: (401) 942.0920
coto technology, inc. for most recent data visit www.cotorelay.com ordering information a complete part number is represented by the digits to the right of the ct10 series prefx followed by a sufx as shown below. example: CT10-1030-G1 is a ct10 sensor (10mm encapsulated switch) with a sensitivity range from 10 to 30at lead ends are formed according to the g1 version dimensions in inches (millimeters) ct10-xxxx-g1 ct10-xxxx-g2 ct10-xxxx-a2 ct10-xxxx-g4 .458 (11.63mm) max. .765/.775 (19.43/19.68mm) .040 (1.02mm) max. .035/.045 (.89/1.14mm) .115 (2.92mm) max. .025 (.63mm) .030 (.76mm) max. .095 (2.41mm) max. .505 (12.8mm) .765-.775 (19.4-19.7mm) .250 (6.35mm) ?.040 (1.02mm) .095 (2.41mm) max. .045 (1.14mm) .045 (1.14mm) .010 (0.25mm) .015 (0.38mm) 105 o re f. .045 (1.1mm) intersec tion .035 (0.9 ) .005.005 (0.1270.127mm) below stando su rf ace .045 (1.14mm) max. .458 (11.6mm) max. .635/.645 (16.13/16.38mm) .040 (1.02mm) max. 0.0120.003 stress relief .025 (.63mm) max. .115 (2.92mm) max. .035/.045 (.89/1.14mm) .010.002 .030 (.76mm) max. .095 (2.41mm) max. .609/.619 (15.47/15.72mm) .095 (2.41mm) .505 (12.8mm) .057 (1.45mm) .095 (2.4mm) .040 (1.01mm) (side vie w) (bot tom vie w) ct10-xxxx-yy series ct1 0 lead con?guration subset: g1 for gull wing version 1 (16.4mm) g2/g4 for gull wing version 2 (19.6mm) a2 for axial at range (measured after mold & lead form) 10-30; 10-40 06242015 coto technology, inc. for most recent data visit www.cotorelay.com
|