l-1 rev.: 0/2015 www.recom-power.com refer to applications notes electronic potentio- meter dimmer features led dimmer ? suitable for 1-10v dimmable led drivers ? with pressure two-way switch and thermal link repot en60669-1 compliant en60669-2-1 compliant description the new repot01-10 is an electronic potentiometer which is the perfect complement to our upcoming led drivers racd45-a, racd60-a, racd100-a and racd150-a. it is also possible to power any led driver that offers a 1-10v dimming input because it works as a current sink and not as an ordinary potentiometer. the repot includes an adjustable minimum dimming level and a switch contact to turn off the driver completely. the warranty is 5 years. selection guide part input dim control dim control number voltage range current voltage (vac) (ma) (vdc) REPOT1-10 198-264 40 1-10 5 y e a r w a r r a n t y 5 specifcations (measured at t a = 25c, nominal input voltage, rated load) protection parameter type value input fuse (1) 0.8a, slow blow environmental parameter condition value operating temperature range max. case temperature range with derating -10c to +80c, ambient 80c max. safety and certifications certifcate type (compliant) standard switches for household and similar fxed-electrical installations - general requirements en-60669-1:2008 switches for household and similar fxed electrical installations - particular requirements en-60669-2-1:2010 -20 100 80 60 40 20 35 0 0 20 40 60 80 100 ambient temperature (c) output power (%) derating graph notes: note1: each dimmer contains a spare fuse inside the white protective cover.
ac/dc converter l-2 rev.: 0/2015 www.recom-power.com specifcations (measured at t a = 25c, nominal input voltage, rated load) repot series dimensions and physical characteristics parameter type value case material metal dimensions (lxwxh) 71.0 x 71.0 x 35mm weight 70g connection input output screw terinal (1.5-2.5mm2) screw terinal (1.5-2.5mm2) mechanical dimensions tolerance: 0.5mm 71.0 35.5 ?3.5 max. m3 10 250~ 71.0 35.5 30.00 13.2 27.20 13.0 49.20 22.00 3.50 3.5 max. repot01-10 fuse f0.8ah250v 21.0 29.0 60.00 cut 1.0 4.0 53.50 3.0 cable input cable input 53.50 top view electronic potentiometer adapter to 6mm bottom view
repot series specifcations (measured at t a = 25c, nominal input voltage, rated load) packaging information parameter type value packaging dimension (lxwxh) cardboard box 73 x 73 x 53mm packaging quantity 1 pcs the product information and specifcations are subject to change without prior notice. recom products are not authorized for use in safety-critical applications (such as life support) without recoms explicit written consent. a safety-critical application is defned as an application where a failure of a recom product may reasonably be expected to endanger or cause loss of life, infict bodily harm or damage property. the buyer shall indemnify and hold harmless recom, its affliated companies and its representatives against any damage claims in connection with the unauthorized use of recom products in such safety-critical applications. l-3 rev.: 0/2015 www.recom-power.com installation l n - + l n + - led driver max. 10 led drivers notes: note2: to set the basic brightness, set the actuating button to the left stop minimum brightness). now use a screw driver to set the desired basic brightness on the potentiometer. persuant to en60699-2-1 the basic value should be set in such a way that the light visibly glows over the entire load range (at nominal voltage -10%) when its set to dark position. note3: dimmer designed for ract20. dc/dc converter
|
