n0613 tkim tc-00003049/91912 tkim/n3004 tsim tb-00000265 no.7988-1/6 http://onsemi.com semiconductor components industries, llc, 2013 november, 2013 2sa2125/2SC5964 bipolar transistor (?) 50v, (?) 3a, low v ce ( sat ) , ( pnp ) npn single pcp stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above t he recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliabili ty. applicaitons ? dc / dc converter, relay drivers, lamp drivers, motor drivers, ash features ? adoption of mbit process ? large current capacity ? low collector to emitter saturation voltage ? high-speed switching ? halogen free compliance speci cations ( ) : 2sa2125 absolute maximum ratings at ta=25c parameter symbol conditions ratings unit collector to base voltage v cbo (-50)100 v collector to emitter voltage v ces (-50)100 v v ceo (--)50 v emitter to base voltage v ebo (--)6 v continued on next page. package dimensions unit : mm (typ) 7007b-004 ordering number : en7988b product & package information ? package : pcp ? jeita, jedec : sc-62, sot-89, to-243 ? minimum packing quantity : 1,000 pcs./reel packing type: td marking electrical connection td 1 : base 2 : collecto r 3 : emitter pcp 2.5 4.0 1.0 1.5 0.5 0.4 3.0 4.5 1.6 0.4 123 1.5 0.75 top view bottom view 2sa2125-td-e 2sa2125-td-h 2SC5964-td-e 2SC5964-td-h ay lot no. ha lot no. 2SC5964 2sa2125 2 3 1 2SC5964 2 3 1 2sa2125
2sa2125/2SC5964 no.7988-2/6 continued from preceding page. parameter symbol conditions ratings unit collector current i c (--)3 a collector current (pulse) i cp (--)6 a base current i b (--)600 ma collector dissipation p c when mounted on ceramic substrate (250mm 2 0.8mm) 1.3 w tc=25c 3.5 w junction temperature tj 150 c storage temperature tstg --55 to +150 c electrical characteristics at ta=25c parameter symbol conditions ratings unit min typ max collector cutoff current i cbo v cb =(--)40v, i e =0a (--)1 a emitter cutoff current i ebo v eb =(--)4v, i c =0a (--)1 a dc current gain h fe v ce =(--)2v, i c =(--)100ma 200 560 gain-bandwidth product f t v ce =(--)10v, i c =(--)500ma (390)380 mhz output capacitance cob v cb =(--)10v, f=1mhz (24)13 pf collector to emitter saturation voltage v ce (sat)1 i c =(--)1a, i b =(--)50ma (--125)100 (--230)150 mv v ce (sat)2 i c =(--)2a, i b =(--)100ma (--250)190 (--500)290 mv base to emitter saturation voltage v be (sat) i c =(--)2a, i b =(--)100ma (--)0.94 (--)1.2 v collector to base breakdown voltage v (br)cbo i c =(--)10 a, i e =0a (--50)100 v collector to emitter breakdown voltage v (br)ces i c =(--)100 a, r be =0 (--50)100 v v (br)ceo i c =(--)1ma, r be = (--)50 v emitter to base breakdown voltage v (br)ebo i e =(--)10 a, i c =0a (--)6 v turn-on time t on see speci ed test circuit. (30)35 ns storage time t stg (230)300 ns fall time t f (18)25 ns switching time test circuit ordering information device package shipping memo 2sa2125-td-e pcp 1,000pcs./reel pb free 2sa2125-td-h pcp 1,000pcs./reel pb free and halogen free 2SC5964-td-e pcp 1,000pcs./reel pb free 2SC5964-td-h pcp 1,000pcs./reel pb free and halogen free i c =10i b1 = --10i b2 =1a for pnp, the polarity is reversed. v r r b v cc =25v v be = --5v + + 50 input output r l 100 f 470 f pw=20 s d.c. 1% i b1 i b2
2sa2125/2SC5964 no.7988-3/6 i c -- v ce i c -- v ce collector to emitter voltage, v ce -- v collector current, i c -- a collector to emitter voltage, v ce -- v collector current, i c -- a -- 5 . 0 -- 4 . 5 -- 4 . 0 -- 3 . 0 -- 3 . 5 -- 2 . 0 -- 2 . 5 -- 1 . 0 -- 1 . 5 -- 0 . 5 0 -- 0 . 4 0 --0.8 --1.2 --1.6 --2.0 -- 0 . 2 -- 0 . 6 -- 1 . 0 -- 1 . 4 -- 1 . 8 5.0 4.5 4.0 3.0 3.5 2.0 2.5 1.0 1.5 0.5 0 0.4 0 0.8 1.2 1.6 2.0 0.2 0.6 1.0 1.4 1.8 it07258 it07259 --10ma --20ma --50ma --150ma --250ma --100ma i b =0ma --5ma 10ma 20ma 40ma 80ma 60ma 100ma i b =0ma 5ma 2sa2125 --200ma 2SC5964 h fe -- i c h fe -- i c f t -- i c f t -- i c gain-bandwidth product, f t -- mhz collector current, i c -- a gain-bandwidth product, f t -- mhz collector current, i c -- a dc current gain, h fe collector current, i c -- a collector current, i c -- a dc current gain, h fe it07262 it07263 100 2 7 3 5 1000 7 5 3 --0.01 257 3257 325 3 -- 0 . 1 -- 1 . 0 it07264 2sa2125 v ce = --10v 3 100 2 7 1000 7 3 2 5 5 0.01 257 3257 325 3 0.1 1.0 it07265 2SC5964 v ce =10v ta=75 c 25 c --25 c 1000 100 7 5 7 5 3 2 3 --0.01 3 25 -- 0 . 1 73 257 3 25 -- 1 . 0 2sa2125 v ce = --2v ta=75 c 25 c --25 c 1000 100 7 7 5 3 2 0.01 3 25 0.1 73 257 3 25 1.0 2SC5964 v ce =2v 2SC5964 v ce =2v it07261 ta=75 c 25 c --25 c ta=75 c 25 c --25 c 2sa2125 v ce = --2v -- 3 . 0 -- 2 . 5 -- 2 . 0 -- 1 . 0 -- 0 . 5 -- 1 . 5 0 0 --0.2 --0.4 --0.6 --0.8 --1.2 -- 1 . 0 3.0 2.5 2.0 1.0 0.5 1.5 0 0 0.2 0.4 0.6 0.8 1.2 1.0 it07260 i c -- v be i c -- v be base to emitter voltage, v be -- v collector current, i c -- a base to emitter voltage, v be -- v collector current, i c -- a
2sa2125/2SC5964 no.7988-4/6 cob -- v cb cob -- v cb collector to base voltage, v cb -- v output capacitance, cob -- pf collector to base voltage, v cb -- v output capacitance, cob -- pf 7 5 3 2 10 100 -- 0 . 1 37 25 37 25 37 25 --1.0 --10 --100 7 5 3 2 10 100 0.1 37 25 37 25 37 25 1.0 10 100 it07266 2sa2125 f=1mhz it07267 2SC5964 f=1mhz --0.01 --0.1 23 57 23 57 23 5 -- 1 . 0 3 2 -- 1 . 0 7 5 3 2 7 5 3 2 -- 0 . 1 -- 0 . 0 1 ta=75 c ta= --25 c 75 c 25 c 25 c - -25 c 2sa2125 i c / i b =50 3 -- 1 . 0 3 -- 0 . 0 1 -- 0 . 1 -- 1 . 0 ta = --25 c 25 c 75 c ta= --25 c 25 c 75 c 2 7 5 23 57 23 5 23 57 3 1.0 3 0.01 0.1 1.0 2 7 5 23 57 23 5 23 57 2sa2125 i c / i b =20 2SC5964 i c / i b =20 v ce (sat) -- i c v be (sat) -- i c v ce (sat) -- i c v be (sat) -- i c collector current, i c -- a collector to emitter saturation voltage, v ce (sat) -- v collector current, i c -- a base to emitter saturation voltage, v be (sat) -- v collector current, i c -- a base to emitter saturation voltage, v be (sat) -- v collector to emitter saturation voltage, v ce (sat) -- v collector current, i c -- a --0.01 --0.1 --1.0 0.01 0.1 23 57 23 57 23 5 1.0 7 5 3 2 7 5 3 2 0.1 0.01 it07270 it07271 ta=75 c 25 c --25 c it07272 2SC5964 i c / i b =50 it07273 v ce (sat) -- i c v ce (sat) -- i c collector current, i c -- a collector to emitter saturation voltage, v ce (sat) -- v collector to emitter saturation voltage, v ce (sat) -- v collector current, i c -- a -- 0 . 1 2 3 5 7 2 3 5 7 --0.01 --0.01 --0.1 23 57 23 57 23 5 -- 1 . 0 ta=75 c --25 c it07268 2sa2125 i c / i b =20 25 c it07269 0.1 2 3 5 7 2 3 5 5 7 0.01 0.01 0.1 23 57 23 57 23 5 1.0 ta=75 c --25 c 2SC5964 i c / i b =20 25 c
2sa2125/2SC5964 no.7988-5/6 3.5 4.0 3.0 2.0 2.5 1.0 1.5 0.5 0 0 20 40 60 80 100 120 140 160 2 3 5 7 2 3 5 7 2 3 5 7 1.0 10 0.1 0.01 23 57 0.1 1.0 23 57 10 23 57 dc operation 100 s 500 s 10ms i cp =6a i c =3a <10 s 1ms 100ms s o a p c -- ta collector dissipation, p c -- w ambient temperature, ta -- c collector to emitter voltage, v ce -- v collector current, i c -- a it07274 0 1.4 0.6 0.8 1.0 1.2 1.3 0.4 0.2 20 060 40 80 100 140 120 16 0 it07275 2sa2125 / 2SC5964 2sa2125 / 2SC5964 tc=25 c single pulse (for pnp, minus sign is omitted.) when mounted on ceramic substrate (250mm 2 ? 0.8mm) p c -- tc case temperature, tc -- c collector dissipation, p c -- w it14114 2sa2125 / 2SC5964
2sa2125/2SC5964 ps no.7988-6/6 on semiconductor and the on logo are registered trademarks of semiconductor components industries, llc (scillc). scillc owns th e rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. a listing of scillc?s product/patent covera ge may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc ass ume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation sp ecial, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different ap plications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life , or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchas e or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiarie s, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the d esign or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws a nd is not for resale in any manner. outline drawing land pattern example 2sa2125-td-e, 2sa2125-td-h, 2SC5964-td-e, 2SC5964-td-h mass (g) unit 0.058 * for reference mm unit: mm 2.2 1.0 1.8 1.5 0.9 3.7 1.5 3.0 1.0 45 45
|
