design and specifications are each subject to change without notice. ask factory for the current technical specifications befo re purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. conductive polymer tantalum solid capacitors r.cap. code lot. no. r. voltage code polarity marking(+) s w1 h - w s surface mount type series : tpg small size, low pro? le (l3.5 w 2.8 h 1.1 mm) large capacitance (220 f max.) rohs compliance, halogen free features size code b1g b15g category temperature range C55 c to +105 c rated voltage range 2.5 v.dc to 12.5 v.dc 2.5 v.dc to 6.3 v.dc category voltage range 2.0 v.dc to 10.0 v.dc 2.0 v.dc to 5.0 v.dc rated capacitance range 33 f to 220 f 150 f to 220 f capacitance tolerance 20 % (120 hz / + 20 c) leakage current please see the attached characteristics list dissipation factor (tan d ) please see the attached characteristics list surge voltage (v.dc) rated voltage 1.15 endurance +85 c, 1000 h rated voltage applied capacitance change within 20 % of the initial value tan d < 1.5 times of the initial limit dc leakage current within the initial limit damp heat (steady state) +60 c, 90 % to 95 %, 500 h, no-applied voltage capacitance change within +40 %, ?20 % of the initial value tan d < 1.5 times of the initial limit dc leakage current < 3 times of the initial limit size code l +0.3 w +0.3 h0.1 s0.2 w10.1 b1g 3.5 2.8 1.1 0.8 2.2 b15g 3.5 2.8 1.4 0.8 2.2 r. voltage (v.dc) 2.5 4.0 6.3 8.0 10.0 12.5 code eg j kab r. cap. (f) 33 47 100 150 220 code n7 s7 a8 e8 j8 series rated voltage (v.dc) rated temp. (c) category voltage (v.dc) category temp. (c) rated capacitance (f) case size (mm) size code specifications standard lwh ripple ? 1 current (mar.m.s.) esr ? 2 (m max.) tan d ? 3 lc ? 4 (a) part number min. packaging q'ty (pcs) tpg 2.5 85 2.0 105 220 3.5 2.8 1.1 b1g 1000 70 0.10 55.0 2r5tpg220m 2500 85 2.0 105 3.5 2.8 1.4 b15g 1400 30/300 khz 0.10 110.0 2r5tpg220mug 2500 4 85 3.2 105 220 3.5 2.8 1.4 1000 70 0.10 88.0 4TPG220M 2500 6.3 85 5.0 105 100 3.5 2.8 1.1 b1g 1000 70 0.10 63.0 6tpg100m 2500 85 5.0 105 3.5 2.8 1.1 1100 55 0.10 63.0 6tpg100mg 2500 85 5.0 105 3.5 2.8 1.1 1200 35/300 khz 0.10 126.0 6tpg100mzgd 2500 85 5.0 105 150 3.5 2.8 1.4 b15g 1000 70 0.10 94.5 6tpg150m 2500 85 5.0 105 3.5 2.8 1.4 1200 35/300 khz 0.10 189.0 6tpg150mzg 2500 8 85 6.3 105 47 3.5 2.8 1.1 b1g 1000 70 0.10 37.6 8tpg47m 2500 10 85 8.0 105 47 3.5 2.8 1.1 1000 70 0.10 47.0 10tpg47m 2500 12.5 85 10.0 105 33 3.5 2.8 1.1 1000 70 0.10 41.3 12tpg33m 2500 ? 1 ripple current (100 khz/ +45 c ), ? 2 esr (100 khz/+20 c) ? 3 tan d (120 hz/+20 c) ? 4 after 5 minutes please refer to each page in this catarog for reflow conditions and taping specifications. unit : mm ?0.1 ?0.1 marking ? externals of ? gure are the reference. specifi cations dimensions (not to scale) characteristics list nov. 2015 01
|
