specification control drawing te connectivity 300 constitutional drive menlo park, ca 94025 usa raychem title: soldersleeve one-step wire terminator, low temperature unless otherwise specified dimensions are in millim eters. [inches dimensions are shown in brackets] document no.: cwt-900x tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron te connectivity reserves the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. prod. rev.: see table doc. issue: 10 date: 15-apr-11 prepared by: m. foronda replaces: d981199 dcr number: d030072 scale: none size: a sheet: 1 of 1 print date: 9-may-11 if this document is printed it becomes uncontrolled . check for the latest revision. product revision product dimensions conductor dimen sions selection guide ?b total mm 2 total cma product name size code color items 3 l max ?a min min max min max min max cwt-9001 c clear 26.0 (1.025) 1.7 (0.065) 0.4 (0.015) 1.7 (0.065) 0.3 0.8 450 1500 cwt-9002 b red 42.0 (1.655) 2.7 (0.105) 1.3 (0.050) 2.7 (0.105) 0.8 2.0 1250 3500 cwt-9003 b blue 42.0 (1.655) 4.5 (0.180) 1.8 (0.070) 4.5 (0.180) 2.0 4.0 2500 7200 cwt-9004 b yellow 42.0 (1.655) 6.0 (0.235) 2.8 (0.110) 6.0 (0.235) 4.0 6.0 6100 19000 CWT-9005 b grey 42.0 (1.655) 7.0 (0.275) 3.2 (0.125) 7.0 (0.275) 6.0 10.0 12000 25000 materials 1. insulation sleeve: heat-shrinkable, radiation cr oss-linked modified polyolefin. transparent clear. 2. solder preform with flux: solder: type cd18 per ansi/j-std-006. flux: type rom1 per ansi/j-std-004. 3. meltable rings: thermally stabilized thermoplast ic. color: see table. application 1. these controlled soldering devices are designed to splice tin-plated or bare copper stranded wires rated for at least +85 ? c. 2. temperature range: -55 ? c to +125 ? c. 3. for installation procedure and application equip ment consult rpip-824-00. for best results, prepare the wires as shown:
|