unit measures 0.24w x 0.77l x 0.4h low cost 0.75 watt in sip pkg unregulated outputs 750vdc isolation non-conductive case internal filters model number output voltage output mamps input range single output dup75-05s05 5 vdc 150 4.5-5.5 vdc dup75-12s05 150 10.8-13.2 vdc dup75-15s05 150 13.5-16.5 vdc dup75-24s05 150 21.6-26.4 vdc dup75-05s12 12 vdc 62 4.5-5.5 vdc dup75-12s12 62 10.8-13.2 vdc dup75-15s12 62 13.5-16.5 vdc dup75-24s12 62 21.6-26.4 vdc DUP75-05S15 15 vdc 50 4.5-5.5 vdc dup75-12s15 50 10.8-13.2 vdc dup75-15s15 50 13.5-16.5 vdc dup75-24s15 50 21.6-26.4 vdc dual output dup75-05d05 +/-5 vdc +/-75 4.5-5.5 vdc dup75-12d05 +/-75 10.8-13.2 vdc dup75-15d05 +/-75 13.5-16.5 vdc dup75-24d05 +/-75 21.6-26.4 vdc dup75-05d12 +/-12 vdc +/-30 4.5-5.5 vdc dup75-12d12 +/-30 10.8-13.2 vdc dup75-15d12 +/-30 13.5-16.5 vdc dup75-24d12 +/-30 21.6-26.4 vdc dup75-05d15 +/-15 vdc +/-25 4.5-5.5 vdc dup75-12d15 +/-25 10.8-13.2 vdc dup75-15d15 +/-25 13.5-16.5 vdc dup75-24d15 +/-25 21.6-26.4 vdc isolated and unregulated 0.75 watt modular dc/dc converters dup75 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
* these are stress ratings. exposure of the devices to any of these conditions may adversely affect long term reliability. proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. all specifcations are typical at nominal input, full load, and 25degc unless otherwise noted input specifications input voltage ranges: 5 vdc nominal 4.5-5.5 vdc 12 vdc nominal 10.8-13.2 vdc 15 vdc nominal 13.5-16.5 vdc 24 vdc nominal 21.6-26.4 vdc output specifications voltage and current see selection chart load regulation +/- 10% on 5v output 10% - fl +/- 6% on all others line regulation +/- 1.2%/1% of vin temperature coeffcient +/-0.1%/degc ripple/noise(single/dual) 50mv pk-pk, typ voltage stability +/-5%, max short circuit protection 1 second max general specifications input-out isolation 750vdc effciency 78%, typ switching frequency 100khz isolation resistance 10000 m ohms environmental specifications oper. temperature -25 to +71 degc(fl) storage temperature -55 to +125 degc * maximum case temp 110 degc * mtbf 5.5 mhrs mil-hdbk 217f ta=25c fl physical specifications case material non-conductive black plastic construction fully encapsulated isolated and unregulated 0.75 watt modular dc/dc converters dup75 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
output derating curve mechanical dimensions pin # single outputs dual outputs 1 + input + input 2 - input - input 3 no pin no pin 4 - output - output 5 nc common 6 + output + output 0.01x 0.02 ( 0.25 x 0.5) rectangular pin 0.77 ( 19.6 ) 0.40(10.2) 0.14 ( 3. 6 ) 0.10(2.54) front view 0.20(5.08) 0.01 6 ( 0. 4 ) 0.08 5 ( 2.16 ) 1. all dimensions in inches (mm) tolerance: x.xx0.02(x.x0.5) x.xxx0.01(x.xx0.25 ) 2. pin pitch tolerance 0.014(0.35) 0.05 3 ( 1.35 ) 1 2 4 5 6 bott om view 0.24 ( 6. 1 ) 50 60 70 80 90 100 -40 -25 0 -10 25 50 75 100 0 natural convection ambient temper at ure (oc) output power (% ) isolated and unregulated 0.75 watt modular dc/dc converters dup75 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
|
