technical data sheet adaptor bnc plug ? uhf jack 51S154-K00N5 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/12.04/3.0 all dimensions are in mm; tole rances according to iso 2768 m-h interface according to bn c side: iec 60169-8, mil-prf-39012, cecc 22120 uhf side: iec 60169-12 documents n/a material and plating connector parts material plating center contact spring bronze aurodur?, gold plated outer contact brass flash white bron ze over silver(e.g. optargen?) body brass flash white bronze over silver(e.g. optargen?) dielectric ptfe gasket neoprenecr 50c6
technical data sheet adaptor bnc plug ? uhf jack 51S154-K00N5 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 electrical data impedance n/a frequency dc to 300 mhz insulation resistance ? 5 x 10 3 m ? center contact resistance ? 1.5 m ? , bnc side; ? 5 m ? , uhf side outer contact resistance ? 1 m ? , bnc side; ? 5 m ? , uhf side test voltage 1500 v rms working voltage 400 v rms contact current (dc) ? 10 a typ. power handling (at 20 c, sea level, vswr 1.0) 400 w typ. @ 300 mhz mechanical data bnc side uhf side mating cycles min. 500 min. 500 center contact captivation: axial ? 30 n ? 30 n environmental data temperature range -25c to +70c thermal shock mil-std-202, meth. 107, cond. b corrosion mil-std-202, meth. 101, cond. b vibration mil-std-202, meth. 204, cond. b shock mil-std-202, meth. 213, cond. g moisture resistance mil-std-202, meth. 106 rohs compliant tooling n/a suitable cables n/a weight weight 28.3 g/pce draft date approved date rev. engineering change number name date chr. entsfellner 17/07/08 sa. krautenbacher 18.03.14 e00 14-0352 t. krojer 18.03.14 while the information has been carefully compiled to the best of our knowled g e, nothin g is intended as representation or warranty on our part and no statement herein shall be construed as recommenda tion to infringe existing patents. in the effort to improve ou r products, we reserve the right to ma ke changes judged to be necessary.
|
