www.roithner - laser.com 1 cw 532 - 5 - 833l ? green dpss line laser module ? 532 nm , < 5 mw ? 60 fan angle ? automatic power control ? 3 vdc input voltage ? ir filter * f an angle s of 45 and 120 are available on request d escription cw 532-5 - 833l is a small size diode pumped solid state (dpss) nd:yvo4+ktp line laser module with a 60 line generating lens, emitting at a wavelength of 532 nm , and an optical output power of <5 mw . it features automatic power control (apc) driving el ectronics for stable operation, an ir filter to block residue ir radiation, and is designed for 3 vdc supply voltage . a matching power supply is optionally available for quick setup (see page 3 for details) . maximum rating s (t case = 25c) parameter values unit min. max. operating t emperature + 15 + 30 c storage t emperature - 2 0 + 80 c electro - optical characteristics (t case = 25c ) parameter values unit min. typ. max. peak wavelength 531 532 533 nm radiated power 5 mw beam diameter at a perture 1.5 mm fan angle * 60 deg. transverse m ode tem 00 warm up time < 3 s beam d ivergence 1.2 mrad operating current 200 ma supply voltage 2.2 3 3.2 vdc body b rass collimating l ens acryl line generating lens 2 ? cylinder lens, glass dimensions ? 8 x 35 ( 53 ) mm leads 2 x 10 cm, 26 awg pvc - free mttf 3000 h rev . 2 . 0 18.1 1 .15
www.roithner - laser.com 2 outline dimensions a ll dimensions in mm electrical connection lead description red +vdc black gnd precautions static electricity: precautions against electrostatic discharge (esd) must be taken when handling or operating the module. surge voltage or electrostatic discharge can result in complete failure of the laser diode . heat sinking : in order to maintain lifetime and stability of the laser diode it is essential to provide efficient heat management. for long time stable operation proper contact between laser module and heat sink is mandatory. safety: this laser module emits highly concentrated visible light which can be hazardous to the human eye and skin . it is classified as class 3r laser product according to iec 60825 -1 and 21 cfr part 1040.10 safety standards . actual laser light emitted and precautions necessary strongly depend on mode of operation. ?8 .0 ?4 .0 35 .0 1 8 .0 11.0
www.roithner - laser.com 3 accessories laser power supply lps3 1 ? 110- 230 vac universal input voltage ? small ripple (<80 mv) ? ac europlug (cee7/16) ? on/off switch ? iec 60130 - 10 type a connector ? output 3 vdc, max. 1 a ? all rights reserved the above specifications are for reference purpose only and subjected to change without prior notice
|
