features guard ring for transient protection low power loss,high efficiency high current capability,low ir high surge capacity mechanical data polarity: color band denotes cathode weight: 0.07 ounces , 2.1 grams mounting position: any maximum ratings and electrical characteristics rating at 25 ambient temperature unless otherwise specified. single phase, half wave ,60hz, resistive or inductive load. for capacitive load, derate current by 20% symbol unit v rrm v v rms v v dc v i (av) a i fsm a v f v @tj=25 @tj=75 @tj=100 @tj=125 r jc /w t j t stg rev. 7, 16-mar-2017 operating temperature range(in dc forward mode- forward operations,without reverse bias, t 1h) -55 to+200 storage temperature range -55 to+200 notes:1.300us pulse width, 2%duty cycle. 2.thermal resistance junction to case. maximum dc blocking voltage 45 maximum average forward rectified current @t c =175 15 ma 2.2 15 25 typical thermal resistance (note2) 3 peak forward surge current 8.3ms single half sine- wave super imposed on rated load(jedec method) 260 peak forward voltage at 15a dc(note1) 0.55 maximum dc reverse current at rated dc blocking voltage i r 1.5 15thy045 photovoltaic solar cell protection schottky rectifier reverse voltage - 45volts forward current - 15.0 amperes maximum rms voltage 31.5 metal of silicon rectifier , majority carrier conduction for use in low voltage,high frequency inverters,free wheeling,and polarity protection applications dimensions in inches and (millimeters) characteristics 15thy045 maximum recurrent peak reverse voltage 45 r - 6 2100 .360(9.1) .340(8.6) .052(1.3) .048(1.2) dia .360(9.1) .340(8.6) dia. 1.0(25.4) min. 1.0(25.4) min. t c measurement point
rating and charactertic curves 15thy045 the curve graph is for reference only, can't be the basis for judgment( ?)! rev. 7, 16-mar-2017 peak forward surge current amperes number of cycles at 60hz fig.2-maximum non-repetitive surge 8.3single half-sine-wave (jedec metod) 12 51020 50 100 10 60 160 210 260 110 310 a verage forward current amperes case temperature fig.1-forward current derating curve 40 60 80 100 120 140 160 10 15 5 0 20 180 200 220 in dc instantaneous reverse current(ma) fig.3-typical reverse percent of rated peak reverse voltage(%) instantaneous forward voltage volts instantaneous forward current(a) fig.4-typical forward characteristics 0 0.1 0.2 0.3 0.4 0.5 0.6 0.1 1 10 0.01 20 t j =100 t j =25 t j =125 t j =75 0.001 0.01 0.1 1.0 10 20 40 60 80 100 t j =100 t j =25 t j =125 t j =75 pulse width 300us 2%duty cycle
legal disclaimer notice all specifications and data are subject to be changed without notice to improve reliability function or design or other reasons. hy makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the co- tinuing production of any product. to the maximum extent permitted by applicable law, hy disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,consequential or incidental d- amages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merch- antability. statements regarding the suitability of products for certain types of applications are based on hy?s knowledge of typical require- ments that are often placed on hy products in generic applications. such statements are not binding statements about the suitabi- lity of products for a particular application. it is the customer?s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application.parameters provided in datasheets and specific- ations may vary in different applications and performance may vary over time. all operating parameters, including typical paramet- ers, must be validated for each customer application by the customer?s technical experts. product specifications do not expand or otherwise modify hy?s terms and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, hy products are not designed for use in medical, life-saving, or life-sustaining applicati- ons or for any other applications in which the failure of the hy product could result in personal injury or death. customers using or selling hy products not expressly indicated for use in such applications do so at their own risk.please contact authorized hy pers- onnel to obtain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of hy. product names and markings noted herein may be trademarks of their respective owners. ?????????? hy ???????????hy (i) ? ??????(ii) ???????(iii) ??? ???????? ????? hy ? hy ???????????? ???????????????? ????? ????????????? ??? hy ???? hy ???? ?hy ????? hy ??????? ?????? hy ????????hy ?? ? ? hy ??????????????????? ??? rev. 2, 16-mar-2017 disclaimer
|
