1 pna2603 l darlington phototransistor for optical control systems darlington phototransistors 50 t d : delay time t r : rise time (time required for the collector photo current to increase from 10% to 90% of its final value) t f : fall time (time required for the collector photo current to decrease from 90% to 10% of its initial value) sig.in r l v cc sig.out (input pulse) (output pulse) 10% 90% t d t r t f unit : mm r0.6 12 r1.2 0.45 0.15 2-0.45 0.15 2-1.2 0.3 1.2 2.9 0.25 4.5 0.3 3.9 0.3 12.8 min. not soldered 2.4 2.8 1.5 1.7 0.2 0.9 0.8 ?.4 0.2 2.54 2-0.98 0.2 1: emitter 2: collector absolute maximum ratings (ta = 25?c) parameter symbol ratings unit collector to emitter voltage v ceo 20 v emitter to collector voltage v eco 5v collector current i c 30 ma collector power dissipation p c 100 mw operating ambient temperature t opr C25 to +80 ?c storage temperature t stg C30 to +100 ?c electro-optical characteristics (ta = 25?c) parameter symbol conditions min typ max unit dark current i ceo v ce = 10v 0.1 0.5 m a collector photo current i ce(l) v ce = 10v, l = 2 lx *1 0.2 1 ma peak sensitivity wavelength l p v ce = 10v 800 nm acceptance half angle q measured from the optical axis to the half power point 40 deg. response time t r , t f *2 v cc = 10v, i ce(l) = 5ma, r l = 100 w 100 m s collector saturation voltage v ce(sat) i ce(l) = 1ma, l = 100 lx *1 0.7 1.5 v *1 measurements were made using a tungsten lamp (color temperature t = 2856k) as a light source. *2 switching time measurement circuit features darlington output, high sensitivity easy to combine light emission and photodetection on same printed circuit board small size, thin side-view type package maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
2 pna260 3l darlington phototransistors p c ?ta 120 100 80 60 40 20 ambient temperature ta (?c ) collector power dissipation p c (mw) 0 20406080100 0 ?20 spectral sensitivity characteristics 100 80 60 40 20 wavelength l (nm) relative sensitivity s (%) 400 600 800 1000 1200 0 200 ta = 25?c i ce(l) ?v ce 32 24 16 8 0 collector to emitter voltage v ce (v) collector photo current i ce(l) (ma) 020 16 812 424 ta = 25?c t = 2856k i ce(l) ?l 10 3 10 2 10 1 illuminance l (lx) collector photo current i ce(l) (ma) 10 10 2 10 3 10 ? 1 v ce = 10v ta = 25?c t = 2856k i ceo ?ta 10 2 10 ? 10 10 ? 1 ambient temperature ta (?c ) v ce = 10v dark current i ceo ( a) 10 ? ?20 0 40 8020 60 100 v ce = 10v t = 2856k i ce(l) ?ta 10 10 ? 1 ambient temperature ta (?c ) collector photo current i ce(l) (ma) ?40 0 40 80 120 10 ? 0? 10? 20? 30? 40? 50? 60? 70? 80? 90? directivity characteristics t r ?i ce(l) 10 3 10 2 collector photo current i ce(l) (ma) rise time t r ( s) 10 ? 110 10 10 ? v cc = 10v ta = 25?c t f ?i ce(l) 10 3 10 2 collector photo current i ce(l) (ma) fall time t f ( s) 10 ? 110 10 10 ? v cc = 10v ta = 25?c 20 90 100 80 70 60 50 40 30 relative sensitivity s (%) 1 lx p c = 100mw l = 30 lx 5 lx 2 lx 20 lx 10 lx 50 10% 90% sig.in t d t r t f r l v cc sig. out sig. out r l = 1k 500 100 50 10% 90% sig.in t d t r t f r l v cc sig. out sig. out r l = 1k 500 100 maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
request for your special attention and precautions in using the technical information and semiconductors described in this book (1) if any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) the technical information described in this book is intended only to show the main characteristics and application circuit examples of the products, and no license is granted under any intellectual property right or other right owned by our company or any other company. therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) the products described in this book are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). consult our sales staff in advance for information on the following applications: ? special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod- ucts may directly jeopardize life or harm the human body. ? any applications other than the standard applications intended. (4) the products and product specifications described in this book are subject to change without notice for modification and/or im- provement. at the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date product standards in advance to make sure that the latest specifications satisfy your requirements. (5) when designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. otherwise, we will not be liable for any defect which may arise later in your equipment. even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (esd, eos, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. when using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) this book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of matsushita electric industrial co., ltd. maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
|
