1 fuses msf 250 https://www.schurter.com /pg01_2 fuses subminiature fuse, 8.5 mm, quick-acting f, 250 vac see below: approvals and compliances iec 60127-3 250 vac quick-acting f description - directly solderable on printed circuit boards - low breaking capacity references packaging details corresponding fuseholder fms (250v) fuse kit fuse kit mst250 / msf 250 weblinks pdf datasheet, html-datasheet, general product information, packaging details, distributor-stock-check, detailed request for product technical data rated voltage 250 vac rated current 0.04 - 5 a breaking capacity 35 a characteristic quick-acting f mounting pcb,tht admissible ambient air temp. -40 c to 85 c climatic category 40/085/21 acc. to iec 60068-1 material: housing thermoplastic, ul 94v-0 material: terminals tin-plated copper unit weight 0.5 g storage conditions 0 c to 40 c, max. 70% r.h. product marking , type, rated current, rated voltage, characteristic, approvals soldering methods wave soldering profile solderability 235 c / 2 sec acc. to iec 60068-2-20, test ta resistance to soldering heat 260 c / 10 sec acc. to iec 60068-2-20, test tb resistance to vibration acc. to iec 60068-2-6, test fc current carrying capacity acc. to eia/is-722, test 4.3.3 life test 1000h @ 0.60 x in @ 70c (acc. to eia/is-722, test 4.4.1) load humidity test 0.1 x in @ 0.85 r.h. @ 85c (acc. to eia/is-722, test 4.4.2) moisture resistance test (acc. to eia/is-722, test 4.4.3) terminal strength tensile load min. 9 n (acc. to eia/is-722, test 4.5.1) thermal shock mil-std-202, method 107d (200 air-to-air cycles from -55 to +125c) case resistance >100 m (between leeds and body) acc. to eia/is-722, test 4.7 mechanical shock mil-std-202, method 213b (shock 50g, half sine wave, 11 ms) resistance to solvents mil-std-202, method 215a flammability ul 94v-0 (acc. to eia/is-722, test 4.12) approvals and compliances detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in details about approvals approvals the approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. approval reference type: msf 250 approval logo certificates certification body description vde approvals vde vde certificate number: 101035 ul approvals ul ul file number: e41599 cqc approvals cqc ccc certificate number:
2 fuses msf 250 https://www.schurter.com /pg01_2 fuses product standards product standards that are referenced organization design standard description designed according to ul 248-14 low voltage fuses - part 14: additional fuses designed according to csa22.2 no. 248.14 low-voltage fuses - part 14: supplemental fuses application standards application standards where the product can be used organization design standard description designed for applications acc. iec/ul 60950 iec 60950-1 includes the basic requirements for the safety of information technologyequipment. compliances the product complies with following guide lines identification details initiator description ce declaration of conformity schurter ag the ce marking declares that the product complies with the applicable requirements laid down in the harmonisation of community legislation on its affixing in accordance with eu regulation 765/2008. rohs schurter ag eu directive rohs 2011/65/eu china rohs schurter ag the law sj / t 11363-2006 (china rohs) has been in force since 1 march 2007. it is similar to the eu directive rohs. reach schurter ag on 1 june 2007, regulation (ec) no 1907/2006 on the registration, evaluation, authorization and restriction of chemicals 1 (abbreviated as "reach") entered into force. dimension [mm] 8.5 mm 8.5 4.3 18.8 ? 8.5 3.2 0.5 ? 0.64 5.08 3.2 ? 0.64 5.08 8.5 ? 8.5 0.5 1 +0.1 0 5.08 drilling diagram pre-arcing time rated current in 1.5 x in min. 2.1 x in max. 2.75 x in min. 2.75 x in max. 4.0 x in min. 4.0 x in max. 10.0 x in max. 0.04 a - 5 a 60 min 30 min 10 ms 3 s 3 ms 300 ms 20 ms
3 fuses msf 250 https://www.schurter.com /pg01_2 fuses time-current-curves time in seconds 0.00 1 0.01 0. 1 1 10 100 1000 10000 100000 1 10 multiple of rated current in all variants rated cur - rent [a] rated vol - tage [vac] breaking capacity voltage drop 1.0 in max. [mv] voltage drop 1.0 in typ. [mv] power dissi - pation 1.5 i n max. [mw] melting i2t 10.0 intyp. [a2s] s l t order number 0.04 250 1) - 400 - 0.00016 l l 0034.6000 0.05 250 1) 850 460 110 0.0004 l l l l 0034.6001 0.063 250 1) 750 330 120 0.001 l l l l 0034.6002 0.08 250 1) 650 280 140 0.001 l l l l 0034.6003 0.1 250 1) 600 300 160 0.002 l l l l 0034.6004 0.125 250 1) 550 210 180 0.006 l l l l 0034.6005 0.16 250 1) 500 460 210 0.014 l l l l 0034.6006 0.2 250 1) 480 470 250 0.024 l l l l 0034.6007 0.25 250 1) 440 360 290 0.058 l l l l 0034.6008 0.315 250 1) 400 345 330 0.104 l l l l 0034.6009 0.4 250 1) 370 80 390 0.044 l l l l 0034.6010 0.5 250 1) 350 75 460 0.09 l l l l 0034.6011 0.63 250 1) 320 70 530 0.15 l l l l 0034.6012 0.8 250 1) 300 70 630 0.22 l l l l 0034.6013 1 250 1) 280 70 740 0.33 l l l l 0034.6014 1.25 250 1) 280 65 920 0.68 l l l l 0034.6015 1.6 250 1) 250 70 1000 0.94 l l l l 0034.6016 2 250 1) 240 70 1360 1.3 l l l l 0034.6017 2.5 250 1) 200 65 1310 1.9 l l l l 0034.6018 3.15 250 1) 180 65 1490 5.4 l l l l 0034.6019 4 250 2) 160 60 1680 7.9 l l 0034.6020 5 250 2) 150 60 1970 11.2 l l 0034.6021 0.04 250 1) - 400 - 0.00016 l l 0034.6030 0.05 250 1) 850 460 110 0.0004 l l l l 0034.6031 0.063 250 1) 750 330 120 0.001 l l l l 0034.6032 0.08 250 1) 650 280 140 0.001 l l l l 0034.6033 0.1 250 1) 600 300 160 0.002 l l l l 0034.6034
4 fuses msf 250 https://www.schurter.com /pg01_2 fuses rated cur - rent [a] rated vol - tage [vac] breaking capacity voltage drop 1.0 in max. [mv] voltage drop 1.0 in typ. [mv] power dissi - pation 1.5 i n max. [mw] melting i2t 10.0 intyp. [a2s] s l t order number 0.125 250 1) 550 210 180 0.006 l l l l 0034.6035 0.16 250 1) 500 460 210 0.014 l l l l 0034.6036 0.2 250 1) 480 470 250 0.024 l l l l 0034.6037 0.25 250 1) 440 360 290 0.058 l l l l 0034.6038 0.315 250 1) 400 345 330 0.104 l l l l 0034.6039 0.4 250 1) 370 80 390 0.044 l l l l 0034.6040 0.5 250 1) 350 75 460 0.09 l l l l 0034.6041 0.63 250 1) 320 70 530 0.15 l l l l 0034.6042 0.8 250 1) 300 70 630 0.22 l l l l 0034.6043 1 250 1) 280 70 740 0.33 l l l l 0034.6044 1.25 250 1) 280 65 920 0.68 l l l l 0034.6045 1.6 250 1) 250 70 1000 0.94 l l l l 0034.6046 2 250 1) 240 70 1360 1.3 l l l l 0034.6047 2.5 250 1) 200 65 1310 1.9 l l l l 0034.6048 3.15 250 1) 180 65 1490 5.4 l l l l 0034.6049 4 250 2) 160 60 1680 7.9 l l 0034.6050 5 250 2) 150 60 1970 11.2 l l 0034.6051 0.04 250 1) - 400 - 0.00016 l l 0034.6060 0.05 250 1) 850 460 110 0.0004 l l l l 0034.6061 0.063 250 1) 750 330 120 0.001 l l l l 0034.6062 0.08 250 1) 650 280 140 0.001 l l l l 0034.6063 0.1 250 1) 600 300 160 0.002 l l l l 0034.6064 0.125 250 1) 550 210 180 0.006 l l l l 0034.6065 0.16 250 1) 500 460 210 0.014 l l l l 0034.6066 0.2 250 1) 480 470 250 0.024 l l l l 0034.6067 0.25 250 1) 440 360 290 0.058 l l l l 0034.6068 0.315 250 1) 400 345 330 0.104 l l l l 0034.6069 0.4 250 1) 370 80 390 0.044 l l l l 0034.6070 0.63 250 1) 320 70 530 0.15 l l l l 0034.6072 0.8 250 1) 300 70 630 0.22 l l l l 0034.6073 1 250 1) 280 70 740 0.33 l l l l 0034.6074 1.25 250 1) 280 65 920 0.68 l l l l 0034.6075 1.6 250 1) 250 70 1000 0.94 l l l l 0034.6076 2 250 1) 240 70 1360 1.3 l l l l 0034.6077 2.5 250 1) 200 65 1310 1.9 l l l l 0034.6078 3.15 250 1) 180 65 1490 5.4 l l l l 0034.6079 4 250 2) 160 60 1680 7.9 l l 0034.6080 5 250 2) 150 60 1970 11.2 l l 0034.6081 most popular. availability for all products can be searched real-time: https://www.schurter.com/en/stock-check/stock-check-schurter 1) 35 a @ 250 vac 2) 10 in @ 250 vac packaging unit s = 4.3 mm plastic bag (100 pcs.) l = 18.8 mm bulk (100 pcs.) t = 18.8 mm taped 36 cm reel (750 pcs.) the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments. information furnished is believed to be accurate and reliable. however, users should independently evaluate the suitability and test each product selected for their own applications. 26.02.2018
|