nps60-m series 60 watts total power: 60 watts input voltage: 90 - 264 vac 127 - 300 vdc # of outputs: single special features ? medical and ite safety approvals ? universal input ? less than 1u high ? 2 x 4 footprint ? remote sense ? overload and short circuit protection ? adjustable output voltage ? high effciency ? high mtbf ? built-in emi flter (cispr 22 class b) ? international effciency level v, energy star 2.0 & cec compliant (except nps62-m) ? less than 300 mw no-load power consumption (less than 500 mw for nps62-m) ? 0 c to +80 c operation ? input power < 74 watts ? complies with en61000-3-2 ? ul class i approved ? class ii approved (with class a emi) ? lpx100 enclosure kit available ? dual ac fuses ? rohs compliant safety ? tuv: 60950, 60601-1 ? ul: 60950, 60601-1 ? csa: 60950, 60601-1 ? nemko: 60950, 60601-1 ? cb: certifcate and report ? ce: mark (lvd) ? ccc: mark electrical specifcations input input ra nge 90 - 264 vac (wide range) 127-300 vdc frequency 47 - 63 hz inrush current < 50 a peak @ 230 vac, cold start @ 25 c input power < 74 watts effciency 87% average (as per energy star 2.0 standard) (nps62-m, 80%) emi/rfi fcc class b conducted; cispr 22 class b conducted; en55022 class b conducted, vde0878pt3 class b conducted safety ground leakage current 275 a @ 50/60 hz; 264 vac input output maximum power 60 w for convection adjustment range 20% minimum hold-up time 13/75 ms 115/230 vac input line overload protection short circuit protection on all outputs. case overload protected @ 110-160% of normal rating overvoltage protection 30-50% above nominal output remote sense compensated for 0.5 v lead drop max. will operate without remote sense connected. reverse connection protected. data sheet power
environmental specifcations operating temperature 0 to 50 c ambient derate each output at 2.5% per degree from 50 to 80 c. -20 c start up storage temperature -45 c to +85 c electromagnetic susceptibility designed to meet en61000-4; -2, -3, -4, -5, -6, -8, -11 level 3 humidity operating; non-condensing 10% to 90% rh vibration iec68-2-6 to the levels of iec721-3-2 mtbf demonstrated > 550,000 hours at full load and 25 c ambient conditions mechanical drawing barcode serial label gnd ta b (cn1) m1 pin 1 pin 3 sk1 model label rohs label 0.16? (4.0) mounting hole (4 places) 4.00" (101.6) 3.73" (94.6) pin 1 pin 6 sk2 1.72" (43.8) 2.00" (50.8) 0.87" (22) nps62-m 1.14? (29) m2 6 pin output connector (sk2) 1.01" (26) nps62-m 1.28? (32.6) input connector (sk1) vr1 output voltage adjust pot 0.197? (5.0) minimum st andoff height nps60-m series data sheet
worldwide offices americas 2900 s.diablo way tempe, az 85282 usa +1 888 412 7832 europe (uk) waterfront business park merry hill, dudley west midlands, dy5 1lx united kingdom +44 (0) 1384 842 211 asia (hk) 14/f, lu plaza 2 wing yip street kwun tong, kowloon hong kong +852 2176 3333 for more information: www.artesyn.com/power for support: productsupport.ep@artesyn.com artesyn embedded technologies, artesyn and the artesyn embedded technologies logo are trademarks and service marks of artesyn embedded technologies, inc. all other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. ? 2016 artesyn embedded technologies, inc. all rights reserved. for full legal terms and conditions, please visit www.artesyn.com/legal. www.artesyn.com nps60-m ds 21mar2016 ordering information model number output voltage minimum load maximum load with convection cooling peak load 1 regulation 2 ripple p/p (pard) 3 nps62-m 5 v 0 a 11 a 13 a 2% 50 mv nps63-m 12 v 0 a 5 a 5.5 a 2% 120 mv nps63-m-006 4 12 v 0 a 5 a 5.5 a 2% 120 mv NPS64-M 15 v 0 a 4 a 4.4 a 2% 150 mv nps65-m 24 v 0 a 2.5 a 2.75 a 2% 240 mv pin assignments connector nps62-m nps63-m nps65-m sk1-1 line line line sk1-3 neutral neutral neutral cn1 ground ground ground sk2-1 +5 v +12 v +24 v sk2-2 +5 v +12 v +24 v sk2-3 common common common sk2-4 common common common sk2-5 -sense -sense -sense sk2-6 +sense +sense +sense mating connectors ac input molex 09-50-8031 (usa) 09-93-0300 (uk) pins: 08-52-0113 dc outputs molex 09-50-8061 (usa) 09-93-0600 (uk) pins: 08-52-0113 artesyn embedded technologies connector kit #70-841-006 includes all of the above. notes: 1. specifcations subject to change without notice. 2. all dimensions in inches (mm), tolerance is 0.02 (0.5 mm) 3. mounting holes m1 and m2 should be grounded for emi purposes. 4. mounting hole m1 is safety ground connection. 5. specifcations are for convection rating at factory settings at 115 vac input, 25 c unless otherwise stated. 6. for dc input an external dc safety rated fuse must be used 7. warranty: 2 year 8. weight: 0.26 lbs/0.118 kg 1. peak current lasting <15 seconds with a maximum 10% duty cycle. 2. at 25 c including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. peak-to-peak with 20 mhz bandwidth and 10 f (tantalum capacitor) in parallel with a 0.1 f capacitor at rated line voltage and load ranges. 4. compliant to level vi effciency. 5. this product is a component power supply and is only for inclusion by professional installers within other equipment and must not be operated as a standalone product. emc compliance to appropriate standards must be verifed at the system level. this product is for sale to oems and system integrators, including through distribution channels. it is not intended for sale to end users. nps60-m series data sheet
|
