maximum ratings operating temperature -55c to 85c storage temperature -55c to 100c absolute max. supply voltage (vcc) 13v absolute max. tuning voltage (vtune) 18v all specifcations 50 ohm system electrical specifcations rev. c m152326 edr-6293 ZX95-200+ rav/urj 150925 page 1 of 2 coaxial voltage controlled oscillator linear tuning 100 to 200 mhz ? excellent harmonic suppression ? low phase noise ? octave bandwidth ? low pushing & pulling ? linear tuning ? protected by us patent 6,790,049 features ? r & d ? lab ? instrumentation ? test equipment applications case style: gb956 ZX95-200+ model freq. power phase noise tuning non harmonics pulling pushing dc no. (mhz) output dbc/hz ssb at offset harmonic (dbc) pk-pk (mhz/v) operating (dbm) frequencies,khz voltage sensi- port 3 db spurious @12 dbr power range tivity cap modulation (dbc) (mhz) typ. (v) (mhz/v) (pf) bandwidth vcc current (mhz) (volts) (ma) min. max. typ. 1 10 100 1000 min. max. typ. typ. typ. typ. typ. max. typ. typ. max. ZX95-200+ 100 200 +10 -86 -106 -128 -148 1 17 7-10 540 0.12 -90 -30 -20 0.5 0.2 12 20 permanent damage may occur if any of these limits are exceeded. outline drawing outline dimensions ( ) inch mm a b c d e f g h j k l m n p q r s t wt. 1.20 .75 .46 1.18 .04 .38 .38 .57 .18 .33 .21 .22 .18 1.00 .50 .35 .18 .106 grams 30.48 19.05 11.68 29.97 1.02 9.65 9.65 14.48 4.57 8.38 5.33 5.59 4.57 25.40 12.70 8.89 4.57 2.69 35.0 http:// www .minicircuits .com/app/an40-010.pd f http:// www .minicircuits .com/app/an40-010.pd f http:// www .minicircuits .com/app/an40-010.pd f note: when soldering the dc connections, caution must be used to avoi d overheating the dc terminals. see application note an-40-10 . ! connectors model sma ZX95-200-s+ notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
performance data & curves* *at 25 o c unless mentioned otherwise ZX95-200+ frequency and tuning sensitivity 80 100 120 140 160 180 200 220 240 0 5 10 15 tuning voltage (v) frequency (mhz) 5 6 7 8 9 10 11 12 13 tuning sensitivity (mhz/v) freq. @ -55c freq. @ +25c freq. @ +85c t.sens @ +25c ZX95-200+ power output 4 5 6 7 8 9 10 11 0 5 10 15 tuning voltage (v) output power (dbm) -55c +25c +85c ZX95-200+ harmonics level -60 -55 -50 -45 -40 -35 -30 -25 -20 0 5 10 15 tuning voltage (v) harmonics (dbc) f2 f3 f4 ZX95-200+ frequency pulling & pushing (supply voltage 12v for pulling) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0 5 10 15 tuning voltage (v) pushing (mhz/v) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 pulling (mhz) pulling pushing ZX95-200+ phase noise vs. tuning voltage -160 -150 -140 -130 -120 -110 -100 -90 -80 -70 -60 0 5 10 15 tuning voltage (v) phase noise (dbc/hz) 1khz 10khz 100khz 1mhz ZX95-200+ phase noise -160 -150 -140 -130 -120 -110 -100 -90 -80 -70 -60 1 10 100 1000 frequency offset (khz) phase noise (dbc/hz) ZX95-200+ page 2 of 2 v tune frequency power output icc harmonics (dbc) phase noise (dbc/hz) (dbm) pull at offsets offset noise at (mhz/v) (mhz/v) c c c c c c (dbc/hz) 0.00 11.08 86.2 83.1 82.7 6.62 5.88 4.63 15.52 -27.6 -46.4 -44.0 0.05 0.04 -85.5 -104.0 -125.4 -146.2 1.0 -87.0 0.50 9.82 91.9 88.6 88.5 7.58 7.30 6.32 15.52 -27.8 -47.6 -45.6 0.35 0.05 -86.1 -107.1 -127.8 -148.2 2.0 -93.72 1.00 8.23 96.5 93.5 93.4 8.53 8.55 7.83 15.45 -28.0 -49.6 -46.8 0.25 0.08 -88.0 -108.9 -129.3 -149.2 3.5 -96.56 1.50 7.40 100.4 97.6 97.5 9.28 9.55 9.05 15.39 -29.5 -51.8 -48.6 0.19 0.13 -87.9 -110.1 -129.8 -150.3 6.0 -102.44 2.00 6.99 104.0 101.3 101.2 9.59 9.87 9.48 15.34 -34.0 -48.6 -49.5 0.17 0.13 -87.3 -108.4 -130.4 -151.2 8.5 -104.48 3.00 6.67 110.8 108.2 108.0 9.85 10.13 9.83 15.26 -39.0 -44.8 -51.0 0.16 0.16 -88.6 -110.3 -130.8 -151.4 10.0 -106.44 4.00 6.75 117.4 114.9 114.6 9.94 10.22 9.97 15.19 -33.0 -43.3 -51.0 0.14 0.20 -88.1 -110.4 -130.6 -151.1 24.9 -115.02 5.00 7.09 124.2 121.7 121.3 9.98 10.24 10.02 15.12 -29.7 -41.8 -51.1 0.14 0.27 -86.5 -109.4 -130.1 -150.7 35.5 -117.64 6.00 7.59 131.4 128.9 128.4 9.99 10.22 10.01 15.05 -27.9 -40.7 -50.7 0.14 0.38 -85.3 -108.1 -129.3 -149.8 60.7 -122.81 7.00 8.10 139.1 136.6 136.0 10.00 10.18 9.97 14.99 -27.5 -39.8 -51.0 0.16 0.44 -86.8 -108.2 -128.6 -149.0 86.7 -126.16 8.00 8.53 147.3 144.8 144.2 9.98 10.11 9.90 14.93 -27.5 -39.3 -51.6 0.20 0.40 -87.3 -106.8 -127.7 -149.0 100.0 -127.33 9.00 8.82 155.9 153.4 152.8 9.93 10.00 9.78 14.88 -28.5 -38.6 -53.4 0.24 0.41 -83.9 -105.5 -127.2 -148.0 148.1 -131.14 10.00 8.93 164.7 162.3 161.6 9.84 9.84 9.62 14.83 -29.5 -38.1 -55.7 0.26 0.57 -84.3 -106.0 -126.4 -147.4 211.6 -134.78 11.00 9.19 173.6 171.3 170.5 9.73 9.67 9.44 14.80 -30.3 -37.4 -56.7 0.27 0.48 -84.0 -105.7 -125.8 -146.6 361.5 -139.44 12.00 9.41 182.7 180.5 179.7 9.57 9.47 9.23 14.76 -31.4 -37.2 -56.8 0.23 0.40 -82.4 -103.7 -125.1 -145.8 432.2 -141.01 13.00 9.81 192.1 190.0 189.2 9.38 9.24 8.99 14.73 -32.1 -37.2 -55.4 0.23 0.37 -84.0 -103.9 -124.1 -144.8 507.5 -142.59 14.00 10.16 202.0 199.9 199.1 9.14 8.98 8.71 14.71 -32.5 -36.9 -52.1 0.26 0.48 -82.2 -102.8 -123.0 -143.5 600.0 -143.97 15.00 10.29 212.1 210.1 209.3 8.89 8.69 8.40 14.69 -30.7 -36.3 -49.5 0.35 0.56 -81.1 -101.6 -121.2 -142.6 712.4 -145.36 16.00 10.03 222.4 220.4 219.5 8.58 8.38 8.06 14.68 -29.5 -36.8 -48.9 0.46 0.67 -80.6 -100.0 -120.5 -141.5 851.6 -147.21 17.00 9.72 232.3 230.2 229.3 8.27 8.08 7.72 14.67 -28.2 -37.2 -49.6 0.55 0.74 -79.2 -98.8 -119.6 -139.7 1000.0 -148.36 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com
|
