rev. 2.0 december 2015 www.aosmd.com page 1 of 7 aoz8832 ultra low capacitance two-line bidirectional tvs diode general description the aoz8832 is an ultra low capacitance one-line bidirectional transient voltage suppressor diode designed to protect high speed data lines and voltage sensitive electronics from high transient conditions and esd. this device incorporates one bidirectional tvs diode in an ultra-small 0201 footprint package. it may be used to meet the esd immunity requirements of iec 61000-4-2, level 4 (15 kv air, 15 kv contact discharge). the aoz8832 comes in an rohs compliant package and is rated over a -40 c to +85 c ambient temperature range. the ultra-small 1.0mm x 0.6 mm x 0.5 mm dfn package makes the aoz8832 ideal for applications where pcb space is a premium. the small size and high esd protection makes it ideal for protecting voltage sensitive electronics from high transient conditions and esd. features ? esd protection for high-speed data lines: ? exceeds: iec 61000-4-2 (esd) 12 kv (air), 12 kv (contact) ? human body model (hbm) 15 kv ? ultra low capacitance: 0.4 pf ? low clamping voltage ? low operating voltage: 5.0 v ? pb-free device applications ? portable handheld devices ? keypads, data lines, buttons ? notebook computers ? digital cameras ? portable gps ? mp3 players typical application pin configuration 1 bidirection protection of two lines 2 3 i/o1 i/o2
aoz8832 rev. 2.0 december 2015 www.aosmd.com page 2 of 7 ordering information aos green products use reduced levels of halogens, and are also rohs compliant. please visit www.aosmd.com/media/aosgreenpolicy.pdf for additional information. absolute maximum ratings exceeding the absolute maximum ratings may damage the device. notes: 1. iec 61000-4-2 discharge with c discharge = 150 pf, r discharge = 330 ? . 2. human body discharge per mil-std-883, method 3015 c discharge = 100 pf, r discharge = 1.5 k ? . maximum operating conditions the device is not guaranteed to operate beyond the maximum operating conditions. part number ambient temperature range package environmental AOZ8832DI-05 -40 c to +85 c dfn 1.0 x 0.6 green product rohs compliant parameter rating vp ? vn 5 v peak pulse current (i pp ), t p = 8/20s (iec61000-4-5) 2 a peak pulse power, t p = 8/20s 30 w storage temperature (t s ) -65 c to +150 c esd rating per iec61000-4-2, contact (1) 12 kv esd rating per iec61000-4-2, air (1) 12 kv esd rating per human body model (2) 15 kv parameter rating junction temperature (t j ) -40 c to +125 c
aoz8832 rev. 2.0 december 2015 www.aosmd.com page 3 of 7 electrical characteristics t a = 25c unless otherwise s pecified. specifications in bold indicate a temperature range of -40 c to +85 c. notes: 3. the working peak reverse voltage (v rwm ) should be equal to or greater than the dc or continuous peak operating voltage level. 4. v br is measured at the pulse test current i t . symbol parameter diagram i pp maximum reverse peak pulse current v cl clamping voltage @ i pp v rwm working peak reverse voltage i r maximum reverse leakage current v br breakdown voltage p pk peak power dissipation c j capacitance @ v r = 0 and f = 1 mhz symbol parameter conditions min. typ. max. units v rwm reverse working voltage (3) between pins 1 and 2 5.0 v v br reverse breakdown voltage (4) i t = 1 ma, between pins 1 and 2 6.0 9.4 10.0 v i r reverse leakage current v rwm = 5 v, between pins 1 and 2 0.05 0.1 a v cl channel clamp voltage i pp = 1 a, t p = 100 ns, between pins 1 and 2 11.5 14.0 v i pp = 2 a, t p = 100 ns, between pins 1 and 2 13.0 16.0 v i pp = 5 a, t p = 100 ns, between pins 1 and 2 16.3 19.5 v i pp = 1 a, iec61000-4-5, 8/20 s, between pins 1 and 2 12.8 15.5 v i pp = 2 a, iec61000-4-5, 8/20 s, between pins 1 and 2 15.3 20.0 v c j junction capacitance v r = 0 v, f = 1 mhz, between pins 1 and 2 0.4 0.6 pf i i pp i r i t i pp v cl v br v rwm v rwm v br v cl v
aoz8832 rev. 2.0 december 2015 www.aosmd.com page 4 of 7 typical performance characteristics clamping voltage vs. peak pulse current (tperiod = 100ns, tr = 1ns) typical variation of cin vs. vr (f = 1mhz, t = 25c) clamping voltage (v) tlp current (a) input voltage (v) normalized input capacitance 2.0 1.6 1.2 0.8 0.4 0 012345 0 4 8 12 16 10 15 20 25 30
aoz8832 rev. 2.0 december 2015 www.aosmd.com page 5 of 7 package dimensions, dfn 1.0x0.6_3l unit: mm a1 a seating plane notes: 1. all dimensions are in milliteters. angles are in degrees. 2.coplanarity applies to the exposed heat sink slug as well as the terminals. symbols a a1 b1 b2 d e e e1 l l1 aaa bbb min. 0.50 0.00 0.45 0.10 0.95 0.55 --- --- 0.20 --- dimensions in millimeters recommended land pattern bottom view nom. 0.52 0.03 0.50 0.15 1.00 0.60 0.35 0.40 0.25 0.05 0.15 0.05 max. 0.55 0.05 0.55 0.20 1.075 0.675 --- --- 0.30 --- dimensions in inches b 0.08 b bbb // 2x b b2 (x2) symbols a a1 b b2 d e e e1 l l1 aaa bbb min. 0.019 0.000 0.018 0.004 0.037 0.022 --- --- 0.008 --- nom. 0.020 0.001 0.020 0.006 0.039 0.024 0.014 0.016 0.010 0.002 0.006 0.002 max. 0.022 0.002 0.022 0.008 0.042 0.027 --- --- 0.012 --- e side view 1.00 0.30 0.55 0.40 0.30 b 0.08 2x e e1 l l l1 b1 d a b aaa 2x pin1 0.20 0.55 pin2 pin3
rev. 2.0 december 2015 www.aosmd.com page 6 of 7 aoz8832 tape and reel dime nsions, dfn 1.0x0.6 carrier tape reel leader / trailer & orientation tape size 8mm reel size ?178 m ?178 0.5 n ?55 1 tvs unit per reel: 10000pcs unit: mm w 8.4 +1.5/-0 h ?13.0 0.5 w1 max. 14.4 k max. 10.1 s 2.0 0.5 g n/a r n/a v n/a r g v w1 m w n h s k package dfn 1.0x0.6/ dfn 1.0x0.6a (8 mm) option t 0.23 0.02 p2 2.00 0.05 b0 1.19 0.05 a0 0.69 0.05 k0 0.66 0.05 d0 0.40 0.05 d1 1.50 0.10 e 8.00 +0.3/-0.1 e1 1.75 0.10 e2 3.50 0.05 p0 2.00 0.05 p1 4.00 0.10 unit: mm t b0 k0 d0 d1 p2 p0 e1 e e2 a0 p1 a dfn 1.0x0.6/ dfn 1.0x0.6a (8 mm) 0.20 0.05 2.00 0.05 1.05 0.04 0.65 0.04 0.61 0.04 0.40 0.05 1.50 0.10 8.00 +0.3/-0.1 1.75 0.10 3.50 0.05 2.00 0.10 4.00 0.10 b trailer tape 300mm min. components tape orientation in pocket leader tape 500mm min.
rev. 2.0 december 2015 www.aosmd.com page 7 of 7 aoz8832 part marking product number code date code a x as used herein: 1. life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. a critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. legal disclaimer alpha and omega semiconductor makes no representation s or warranties with re spect to the accuracy or completeness of the information provid ed herein and takes no liabilities fo r the consequences of use of such information or any product described herein. alpha and omega semiconductor reserves t he right to make changes to such information at any time without further notice. this document does not constitute the grant of any intellectual property rights or representation of non-infringeme nt of any third party?s intellectual property rights. life support policy alpha and omega semiconductor products are not authorized for use as critical components in life support devices or systems.
|
