Part Number Hot Search : 
0BZXC 0M350 KR3803X L101G MJF47 FESP05JA OPB780Z 79L12
Product Description
Full Text Search
 

To Download DVGA2-33APP Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  page 1 of 9 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com the big deal ? integrated amplifer and digital attenuator ? 19 db gain / 31.5 db gain control ? flat frequency response, 0.7 db (700-2100 mhz) product overview the DVGA2-33APP+ is a 50 w rf digital variable gain amplifer that offers an attenuation of 31.5 db in 0.5 db steps using a 6-bit parallel interface attenuator and 19db gain using a ingap hbt amplifer. step attenuator used in DVGA2-33APP+ is produced using a unique combination of cmos process on silicon, offering the performance of gaas, with the advantages of conventional cmos devices. feature advantages 31.5 db attenuation in 0.5 db step size combining medium gain and a wide range of gain control makes the dvga2- 33app+ an ideal building block for any rf chain where level setting control is required in a fast speed of parallel control interface. flat frequency response, 0.7 over 700-2100 mhz no need for external components to fatten gain. medium gain, 19 db incorporating multiple stages of amplifcation, the DVGA2-33APP+ provides me - dium gain over a wideband reducing cost and pcb board space. good ip3, +30.7 dbm at 1.0 ghz use in receivers and transmitters giving the users advantage in instantenous spur free dynamic range over wide bandwidths. output power, +16.8 dbm at 1.0 ghz the DVGA2-33APP+ maintains consistent output power capability over the full attenuation range and operating temperature range making it ideal to be used in remote applications such as lnbs as the l band driver stage. attenuation step size, 0.5 db, accuracy 0.1 to 0.5 db typ. total attenuation, 31.5 db enables precise control of gain in 0.5 db steps up to 31.5 db. mclp package low inductance, repeatable transitions, excellent thermal pad. pcb area reduction the DVGA2-33APP+ combines multiple functions common to tx/rx architectures into a single 5x5mm package flexibility in the application block diagram the DVGA2-33APP+ provides access to the internal circuit through external jumper (see simplifed schematic) enables designers fexibility to incorporate a wide range of additional circuits. key features digital controlled variable gain amplifer DVGA2-33APP+ 50 ? 0.05 to 3 ghz 31.5 db, 0.5 db step, 6 bit parallel control case style: dg1677
page 2 of 9 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com product features ? 31.5 db gain control 0.5db step size ? gain, 19 db nominal at 0db attenuation and 1 ghz ? useable to 4 ghz ? parallel control interface ? small size 5.0 x 5.0 mm typical applications ? base station infrastructure ? gps ? lte ? wcdma general description the DVGA2-33APP+ is a 50 ? rf digital variable gain amplifer that offers an attenuation of 31.5 db in 0.5 db steps using a 6-bit parallel interface attenuator and 19db gain using a ingap hbt amplifer. step attenuator used in dvga2- 33app+ is produced using a unique combination of cmos process on silicon, offering the performance of gaas, with the advantages of conventional cmos devices. digital controlled variable gain amplifer 50 w 50 - 3000 mhz simplifed schematic (refer to table 1 for pad description) DVGA2-33APP+ case style: dg1677 rev. or m151258 DVGA2-33APP+ mcl ny 160601 19 db gain, 0.5 db step, 31.5 db attenuation, 6 bit parallel control +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
page 3 of 9 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com rf electrical specifcations (1) at 25c, 50 ? with v d1 =+3.0v, v d2 =+5v parameter condition (ghz) min. typ. max. units frequency range 0.05 3.0 ghz gain (at 0 db attenuation) 0.05 20.6 db 1.0 19.4 2.0 16.3 17.9 20.0 3.0 15.7 input return loss (all states) 0.05 13.2 db 1.0 13.6 2.0 10.8 3.0 10.8 output return loss (all states) 0.05 17.1 db 1.0 15.8 2.0 11.2 3.0 8.0 output power @ 1 db compression (all states) 0.05 16.5 dbm 1.0 16.8 2.0 18.1 3.0 16.2 output ip3 (all states) 0.05 31.9 dbm 1.0 30.7 2.0 31.5 3.0 29.1 noise figure (at 0 db attenuation) 0.05 4.7 db 1.0 4.9 2.0 5.3 3.0 5.2 accuracy @ 0.5 db attenuation setting 0.05 - 1.0 0.02 0.12 db 1.0 - 3.0 0.13 0.23 accuracy @ 1 db attenuation setting 0.05 - 1.0 0.02 0.13 db 1.0 - 3.0 0.22 0.3 accuracy @ 2 db attenuation setting 0.05 - 1.0 0.02 0.16 db 1.0 - 3.0 0.41 0.6 accuracy @ 4 db attenuation setting 0.05 - 1.0 0.03 0.3 db 1.0 - 3.0 0.58 0.7 accuracy @ 8 db attenuation setting 0.05 - 1.0 0.05 0.4 db 1.0 - 3.0 0.97 1.1 accuracy @ 16 db attenuation setting 0.05 - 1.0 0.13 0.6 db 1.0 - 3.0 1.21 1.4 thermal resistance (amplifer) 2 91 c/w 1. measured in mini-circuits characterization test board tb-694a+. see characterization test circuit (fig. 2) 2. junction to ground paddle digital controlled variable gain amplifer (dvga) DVGA2-33APP+
page 4 of 9 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com parameter min. typ. max. units switching speed, 50% control to 0.5db of attenuation value 1.0 m sec switching rep rate 25 khz attenuation switching specifcations figure 1. switching speed permanent damage may occur if any of these limits are exceeded. absolute maximum ratings parameter ratings operating temperature (ground pad) -40c to 85c storage temperature -65c to 150c v d 1 -0.3v min., 5.5v max. v d 2 5.7v voltage on any control input -0.3v min., v d 1 +0.3v max. input power +13dbm parameter min. typ. max. units supply voltage, v d 1 2.7 3.0 3.3 v v d 2 4.75 5.0 5.25 v supply current, i d 1 2 d 2 11 1 a dc electrical specifcations *except 30 a typ. for c0.5, c16 and 2 a typ. for le. digital controlled variable gain amplifer (dvga) DVGA2-33APP+ 1 50% 0 serial control state change 0.5 db of final value 0 t gain a gain b t rf output signal switching speed
page 5 of 9 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com notes: 1. all rf input and output ports shall be ac coupled with external blocking capacitor. 2. latch enable (le) has an internal 2m w pull-up resistor to v d1 3. place a 10k w resistor in series, as close to pin as possible to avoid freq. resonance (see layout drawing pl-383). 4. place a 10k w resistor to ground. 5. the exposed solder pad on the bottom of the package (see pin confguration) must be grounded for proper device operation 6. see application and characterization test circuit and layout drawing pl-383. table 1. pad description pin number function description 1 n/c not connected 2 rf in rf input port (note 1) 3 n/c not connected 4 n/c not connected 5 n/c not connected (note 4) 6 gnd ground 7 le latch enable input (note 2) 8 n/c no connection 9 pup1 power-up selection 10 pup2 power-up selection 11 v d1 v d1 power supply input 12 gnd ground 13 gnd ground 14 n/c not connected 15 n/c not connected 16 n/c not connected 17 rf out & v d2 rf output and v d2 on same pad (external bias tee) (note1,6) 18 n/c not connected 19 n/c not connected 20 n/c not connected 21 n/c not connected 22 rf jump in interstage rf jumper input (note 1) 23 rf jump out interstage rf jumper output (note 1) 24 n/c not connected 25 n/c not connected 26 c8 power up control for 8db att. bit (note 4) 27 c4 power up control for 4db att. bit (note 4) 28 c2 power up control for 2db att. bit (note 4) 29 c1 power up control for 1db att. bit (note 4) 30 c0.5 power up control for 0.5db att. bit (note 4) 31 c16 power up control for 16db att. bit (note 3,4) 32 n/c not connected paddle gnd ground (note5) n/c n/c c0.5 rf jump in rf jump ou t n/c n/c n/c n/c rfin n/c c2 c1 c16 n/c 24 23 22 21 20 1 2 3 4 5 6 7 8 9 32 31 30 29 1 0 19 18 17 n/c n/c rfout and v d2 11 1 2 13 1 4 1 5 1 6 le gnd gnd gnd v d1 pup2 pup1 n/c n/c n/c 28 27 26 25 c8 c4 n/c paddle ground n/c digital controlled variable gain amplifer (dvga) DVGA2-33APP+
page 6 of 9 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com application and characterization test circuit product marking black body model family designation figure 2. schematic of test circuit used for characterization. (dut soldered on mini-circuits characterization test board tb-694a+). gain, output power at 1 db compression (p1db) output ip3 (oip3), noise figure are measured using agilents n5242a pna-x microwave network analyzer. n/c conditions: 1. gain: pin=-25 dbm 2. output ip3 (oip3): two tones, spaced 1 mhz apart +5 dbm/ tone at output. 3. schmitt trigger used in characterization circuit. not required when application circuit includes recommended level settings. bill of materials ref. des. value / description case style, size u1 DVGA2-33APP+ n1 conn vert hdr 2-row 16 pos n2 conn vert hdr 4pos 1.25mm n3,n4 hex invert trigger fairchild p/n mm74hc14m n5 conn vert hdr 2-row 4 pos n6 schmitt trigger buffer ti p/n sn74lvc2g17dckr c1 1000 pf 0402 c2 1000 pf 0805 c3 1 uf 0805 c4 100 pf 0402 c5 100 pf 0603 c6,c17 0.47 uf 0805 c7 0.1 uf 0805 c8-c16 100 pf 0603 r1,r20 475 ohm 0603 r2,r21 681 ohm 0603 r3-r10 10 kohm 0603 r11 10 kohm 0402 r12,r13 475 ohm 0603 r14-r19 0 ohm 0603 r22-r23 optional pull up resistors for pup1 and pup2 0603 l1 390 nh 0603 dvga2a xxyy digital controlled variable gain amplifer (dvga) DVGA2-33APP+
page 7 of 9 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com simplifed schematic figure 3 . the DVGA2-33APP+ parallel interface consists of 6 control bits that select the desired attenuation state, as shown in table 2 truth table. the parallel interface timing requirements are defned by figure 4 (parallel interface timing diagram) and table 3 (par - allel interface ac characteristics), and switching speed. for latched parallel programming the latch enable (le) should be held low while changing attenuation state control values, then pulse le high to low (per figure 1) to latch new attenuation state into device. for direct parallel programming, the latch enable (le) line should be pulled high. changing attenuation state control values will change device state to new attenuation. direct mode is ideal for manual control of the device (using hardwire, switches, or jumpers). table 2. truth table attenuation state c16 c8 c4 c2 c1 c0.5 reference 0 0 0 0 0 0 0.5 (db) 0 0 0 0 0 1 1 (db) 0 0 0 0 1 0 2 (db) 0 0 0 1 0 0 4 (db) 0 0 1 0 0 0 8 (db) 0 1 0 0 0 0 16 (db) 1 0 0 0 0 0 31.5 (db) 1 1 1 1 1 1 note: not all 64 possible combinations of c0.5 - c16 are shown in table digital controlled variable gain amplifer (dvga) DVGA2-33APP+
page 8 of 9 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com the DVGA2-33APP+ always assumes a specifable attenuation setting on power-up, allowing a known attenuation state to be established before an initial parallel control word is provided. when the attenuator powers up with le=0, the six parallel control bits are set to one of four possible values. these values are selected by the two power up control bits; pup1 and pup2, as shown in table 4 (power-up truth table, parallel mode) power-up control settings figure 4. parallel interface timing diagram table 3. parallel interface ac characteristics (v d1 =3v ) symbol parameter min. max. units t lepw le minimum pulse width 10 ns t pdsup parallel data set-up time before clock rising edge of le 10 ns t pdhld parallel data hold time after clock falling edge of le 10 ns table 4 power-up le=1 provides normal parallel operation with c0.5-c16, and pup1 and pup2 are not active. digital controlled variable gain amplifer (dvga) DVGA2-33APP+
page 9 of 9 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com esd rating human body model (hbm): class 1a (250 to <500v) in accordance with ansi/esd stm 5.1 - 2001 machine model (mm): class m1 (100v) in accordance with ansi/esd stm5.2-1999 msl rating moisture sensitivity: msl1 in accordance with ipc/jedec j-std-020d performance data data table swept graphs s-parameter (s2p files) data set (.zip fle) case style dg1677 plastic package, exposed paddle, lead fnish: ni/pd/au tape & reel standard quantities available on reel f68 7 reels with 20,50,100,200, 500 or 1k devices suggested layout for pcb design pl-383 evaluation board tb-694a+ environmental ratings env66 additional detailed technical information additional information is available on our dash board. to access this information click here additional notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp visual inspection electrical test sam analysis refow 3 cycles, 260c soak 85c/85rh 168 hours bake at 125c, 24 hours visual inspection electrical test sam analysis start finish digital controlled variable gain amplifer (dvga) DVGA2-33APP+


▲Up To Search▲   

 
Price & Availability of DVGA2-33APP

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X