specifcations radial metallized polyester rc network for transient suppression highlights ? noise and arc suppression ? rc snubber network ? relay contact protection ? noise reduction on controllers and drives ? emi/rfi reduction ? dv/dt suppression ? type qrl - ul/csa verison ? coated with fame retardant epoxy ? halogen-free (date codes 1807 and after) capacitance range: voltage range: capacitance tolerance: resistor tolerance: resistor values: operating temperature range : construction: dielectric withstand voltage: dc life test: long term stability: 0.10 f, 0.25 f, 0.50 f, 1.0 f 200 vdc/125 vac, 60 hz thru 1600 vdc/660 vac, 60 hz 20% 10% 22, 39, 47, 100, 150, 220, 330, 680 ohms C55 oc to +85 oc at full rated voltage metallized polyester in series with a carbon composition resistor 1 1.6 x dc rated voltage @ +25 oc 125% of rated voltage for a period of 500 hours at 85 oc with capacitance change 5% and df original limits the capacitance shall not change more than 2% when stored at ambient temperature and humidity for a period of two years or less. rohs compliant type qrl: ul file no. e33628, csa file no. lr32208 ratings outline dimensions quencharc l max. max. t h max. .850" min. d s typ. .25" max. quencharc "arcing", "sparking", and "transients" often cause premature failures in relays, switches, thyristors, triacs, contactors, and related products. quencharc extends operating life when properly selected and applied. quencharc arc suppressor snubber network catalog part number cap (uf) resistor dimensions in inches dimensions in millimeters ohms watts l t h s ?d c ?d r l t h s ?d c ?d r max max max typ. typ. typ. max max max typ. typ. typ. 200 vdc / 125vac 504m02qa22 0.5 22 1/2 1.08 0.37 0.64 0.82 0.032 0.025 27.4 9.4 16.3 20.8 0.8 0.635 504m02qa47 0.5 47 1/2 1.08 0.37 0.64 0.82 0.032 0.025 27.4 9.4 16.3 20.8 0.8 0.635 504m02qa100 0.5 100 1/2 1.08 0.37 0.64 0.82 0.032 0.025 27.4 9.4 16.3 20.8 0.8 0.635 504m02qa220 0.5 220 1/2 1.08 0.37 0.64 0.82 0.032 0.025 27.4 9.4 16.3 20.8 0.8 0.635 105m02qb22 1.0 22 1/2 1.45 0.39 0.66 1.20 0.032 0.025 36.8 9.9 16.7 30.5 0.8 0.635 105m02qb47 1.0 47 1/2 1.45 0.39 0.66 1.20 0.032 0.025 36.8 9.9 16.7 30.5 0.8 0.635 600 vdc / 250vac 104m06qc22 0.1 22 1/2 1.08 0.39 0.66 0.82 0.032 0.025 27.4 9.9 16.7 20.8 0.8 0.635 104m06qc47 0.1 47 1/2 1.08 0.39 0.66 0.82 0.032 0.025 27.4 9.9 16.7 20.8 0.8 0.635 104m06qc100 0.1 100 1/2 1.08 0.39 0.66 0.82 0.032 0.025 27.4 9.9 16.7 20.8 0.8 0.635 104m06qc150 0.1 150 1/2 1.08 0.39 0.66 0.82 0.032 0.025 27.4 9.9 16.7 20.8 0.8 0.635 104m06qc220 0.1 220 1/2 1.08 0.39 0.66 0.82 0.032 0.025 27.4 9.9 16.7 20.8 0.8 0.635 104m06qc330 0.1 330 1/2 1.08 0.39 0.66 0.82 0.032 0.025 27.4 9.9 16.7 20.8 0.8 0.635 type q/qrl (quencharc ? ) arc suppressor/snubber network cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 ? www.cde.com
ratings catalog part number cap (f) resistor dimensions in inches dimensions in millimeters ohms watts l t h s ?d c ?d r l t h s ?d c ?d r max max max typ. typ. typ. max max max typ. typ. typ. 600 vdc / 250vac 254m06qd22 0.25 22 1/2 1.45 0.42 0.75 1.20 0.032 0.025 36.8 10.6 19.0 30.5 0.8 0.635 254m06qd47 0.25 47 1/2 1.45 0.42 0.75 1.20 0.032 0.025 36.8 10.6 19.0 30.5 0.8 0.635 254m06qd100 0.25 100 1/2 1.45 0.42 0.75 1.20 0.032 0.025 36.8 10.6 19.0 30.5 0.8 0.635 254m06qd150 0.25 150 1/2 1.45 0.42 0.75 1.20 0.032 0.025 36.8 10.6 19.0 30.5 0.8 0.635 504m06qe22 0.5 22 1/2 1.45 0.59 0.92 1.20 0.032 0.025 36.8 15.0 23.4 30.5 0.8 0.635 504m06qe47 0.5 47 1/2 1.45 0.59 0.92 1.20 0.032 0.025 36.8 15.0 23.4 30.5 0.8 0.635 504m06qe100 0.5 100 1/2 1.45 0.59 0.92 1.20 0.032 0.025 36.8 15.0 23.4 30.5 0.8 0.635 504m06qe150 0.5 150 1/2 1.45 0.59 0.92 1.20 0.032 0.025 36.8 15.0 23.4 30.5 0.8 0.635 1200 vdc / 480vac 104m48qh39 0.1 39 2 1.60 0.64 1.04 1.29 0.032 0.032 40.6 16.3 26.4 32.7 0.8 0.8 1600 vdc / 660vac 104m66qv39 0.1 39 2 2.18 0.54 1 1.8 0.032 0.032 55.3 13.7 25.4 45.7 0.8 0.8 ul/csa recognized across-the-line application type qrl 125vac type qrl complies with ul1414/csa-c22.2 no. 1 104macqrl150 0.1 150 1/2 1.08 0.44 0.66 0.82 0.032 0.025 27.4 11.18 16.7 20.8 0.8 0.635 104MACQRL680 0.1 680 1/2 1.08 0.44 0.66 0.82 0.032 0.025 27.4 11.18 16.7 20.8 0.8 0.635 type qrl: ul file no. e33628, csa file no. lr32208 1 two watt resistor is wire wound shaded items are stocked parts notice and disclaimer: all product drawings, descriptions, specifcations, statements, information and data (collectively, the information) in this datasheet or other publication are subject to change. the customer is responsible for checking, confrming and verifying the extent to which the information contained in this datasheet or other publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on the knowledge that the cornell dubilier company providing such statements (cornell dubilier) has of operating conditions that such cornell dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter C and cornell dubilier specifcally and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specifc customer application, use, storage, transportation, or operating environment. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by cornell dubilier with reference to the use of any cornell dubilier products is given gratis (unless otherwise specifed by cornell dubilier), and cornell dubilier assumes no obligation or liability for the advice given or results obtained. although cornell dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 ? www.cde.com type q/qrl (quencharc ? ) arc suppressor/snubber network
|
