1 technical data sheet smc jack bulkhead connector crimp/solder attachment for rg178, rg196 confguration connector smc jack connector specifcation mil-c-39012 connector interface type rg178,rg196 cable attachment method (shield/contact) crimp/solder body style straight mount method bulkhead electrical specifcations impedance, ohms 50 mechanical specifcations temperature operating range, deg c -65 to +165 size length, in [mm] 1.21 [30.73] width/dia., in [mm] 0.25 [6.35] . weight, lbs [g] 0.006 [2.72] connector type smc jack contact material and plating gold contact plating specifcation mil-g-45204 body material and plating brass, nickel dielectric type t efon compliance certifcations (visit www.pasternack.com for current document) plotted and other data notes: v alues at 25 c, sea level smc jack bulkhead connector crimp/solder attachment for rg178, rg196 from pasternack enterprises has same day shipment for domestic and international orders. our rf, microwave and fber optic products maintain a 99% availability and are part of the broadest selection in the industry. click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: smc jack bulkhead connector crimp/solder attachment for rg178, rg196 PE4365 url: http://www.pasternack.com/smc-jack-standard-rg178-rg196-connector-PE4365-p.aspx PE4365 PE4365 rev smc jack bulkhead connector crimp/solder attachment for rg178, rg196
? 2013 pasternack enterprises all rights reserved 2 PE4365 rev scale n/a dwg title cad file 127 fscm no. 53919 rev. a 091008 size a PE4365 notes: 1. unless otherwise specified all dimensions are nominal. 2. all specifications are subject to change without notice at any time. 3. dimensions are in inches [mm]. 4. fits mil-c-17 and equivalent cables. 1. slide ferrule (1) over cable. strip cable as shown. 2. flair braid insert extension (2)over dielectric and under braid until it stops. slide ferrule (1) over braid and butt against extension (2). 3. solder center conductor to contact (2). thru hole in contact. 4. insert assembly 1 & 2 into connector body (3) and tighten. crimp ferrule (1) to cable. assembly procedures ferrule: .128" hex crimp tool smc jack bulkhead connector crimp/solder attachment for rg178, rg196 PE4365 cad drawing
|
