radial box metallized polyester capacitors specifcations capacitance range: voltage range: capacitance tolerance: operating temperature range: dielectric withstand voltage: dissipation factor (df): the type 160 series radial lead metallized polyester box capacitors are constructed in rugged rectangular plastic cases with lead spacings that are standard in the electron - ics industry. all type 160 capacitors are available in bulk with a .217 .039 lead length, and they are good for general purpose applications such as bypass, decoupling, energy storage/discharge and arc suppression. highlights ? rohs compliant ? rugged plastic case ? case and epoxy fll meets ul94v0 ? 10 mm through 27.5 mm lead spacings ? non-inductively wound ? non-polar ? wire lead material, tinned copper clad steel rohs compliant 0.0022 f to 10.0 f 63 vdc to 1000 vdc 5%, 10%, 20% C55 oc to +125 oc ( derating voltage to 1.25% per oc above 85 oc) 1.6 x rated voltage for 2 sec @ +25 oc 5 oc tan x 10 C4 at 25 oc 5 oc khz c 1 f c >1 f 1 100 100 10 150 total self inductance (l): long term stability (after two years) : corona (partial discharge inception voltage): maximum pulse rise time (dv/dt): pitch (mm) 10 15 22.5 27.5 l (nh) 9 10 18 18 capacitance change ?c/c 3% under standard environmental conditions 200 vac for 100 vdc, 200 vdc 250 vac for 400 vdc, 630 vdc 300 vac for 1000 vdc pitch (mm) vn 10 15 22.5 27.5 63 100/160 250 400 630 1000 3 6/8 11 20 30 60 1.5 3 7 10 15 25 1 2 4 5.5 8 15 1 1 3 5 7 10 if the working voltage (v) is less than the nominal voltage (vn), the capacitor can work at higher dv/dt. in this case, the maximum value allowed is obtained by multiplying the above value with the ratio vn/v. type 160 metallized polyester radial lead capacitors cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 ? www.cde.com
test method and performance capacitor outline drawing l max t max h max s 0.016 (0.5 mm) . 196 -.040 / +0.06 (5.0 -1 / +1.5 mm) ?d 0.003 (0.076 mm) note: the lead diameter is a maximum dimension for lead spacing 15 mm and a nominal for lead spacing >15 mm soldering test conditions soldering temperature soldering duration 260 oc 5 oc 10 sec 1 sec performance capacitance change ?c/c df change ?tg 2% 30 x 10 C4 at 10 khz for c 1.0 f 20 x 10 C4 at 1 khz for c >1.0 f insulation resistance test conditions temperature 25 oc 5 oc voltage charge time 1 minute voltage charge 50 vdc for vn < 100 vdc 100 vdc for vn 100 vdc performance for vn > 100 vdc 30,000 m? for 0.33f 10,000 m? x f for c > 0.33f for vn 100 vdc 10,000 m? for c 0.1f 1,000 m? x f for 0.1f damp heat test test conditions temperature +40 oc relative humidity 95% test duration 21 days performance capacitance change ?c/c 5% df change ?tg 50 x 10 4 at 1 khz insulation resistance 50% of limit value life test test conditions temperature +85 oc test duration 1000 hrs voltage applied 1.25 x vn performance capacitance change ?c/c 5% df change ?tg 30 x 10 C4 at 10 khz for c 1.0 f 20 x 10 C4 at 1 khz for c >1.0 f insulation resistance 50% of limit value ratings rohs compliant cap (f) catalog part number inches millimeters l t h s ?d l t h s ?d 63 vdc .22 .27 .33 160224*63dCf 160274*63dCf 160334*63eCf 0.512 0.512 0.512 0.157 0.157 0.157 0.374 0.374 0.374 0.394 0.394 0.394 0.031 0.031 0.031 13.0 13.0 13.0 5.0 5.0 6.0 11.0 11.0 12.0 10.0 10.0 10.0 0.8 0.8 0.8 .39 .47 .56 160394*63eCf 160474*63eCf 160564*63dCf 0.512 0.512 0.512 0.157 0.197 0.197 0.374 0.433 0.433 0.394 0.394 0.394 0.031 0.031 0.031 13.0 13.0 13.0 6.0 6.0 5.0 12.0 12.0 11.0 10.0 10.0 10.0 0.8 0.8 0.8 .68 .68 .82 160684*63dCf 160684*63gCf 160824*63eCf 0.512 0.709 0.512 0.197 0.236 0.236 0.433 0.472 0.472 0.394 0.591 0.394 0.031 0.031 0.031 13.0 18.0 13.0 5.0 6.0 6.0 11.0 12.0 12.0 10.0 15.0 10.0 0.8 0.8 0.8 .82 1.0 160824*63hCf 160105*63hCf 0.709 0.709 0.197 0.197 0.433 0.433 0.591 0.591 0.031 0.031 18.0 18.0 7.5 7.5 13.5 13.5 15.0 15.0 0.8 0.8 1.5 2.2 3.3 160155*63gCf 160225*63hCf 160335*63mCf 0.709 0.709 1.043 0.236 0.295 0.276 0.472 0.531 0.650 0.591 0.591 0.886 0.031 0.031 0.031 18.0 18.0 18.0 6.0 7.5 10.0 12.5 14.0 16.0 15.0 15.0 15.0 0.8 0.8 0.8 4.7 6.8 10.0 160475*63nCf 160685*63oCf 160106*63pCf 1.043 1.043 1.260 0.335 0.394 0.433 0.669 0.748 0.787 0.886 0.886 1.083 0.031 0.031 0.031 26.5 26.5 26.5 8.5 10.0 13.0 17.0 19.0 23.0 22.5 22.5 22.5 0.8 0.8 0.8 * indicates capacitance tolerance: j = 5%, k = 10%, m = 20% cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 ? www.cde.com type 160 metallized polyester radial lead capacitors
rohs compliant cap (f) catalog part number inches millimeters l t h s ?d l t h s ?d 100 vdc .10 .12 .15 160104*100cCf 160124*100cCf 160154*100cCf 0.512 0.512 0.512 0.157 0.157 0.157 0.374 0.374 0.374 0.394 0.394 0.394 0.031 0.031 0.031 13.0 13.0 13.0 4.0 4.0 4.0 9.5 9.5 9.5 10.0 10.0 10.0 0.8 0.8 0.8 .18 .22 .27 160184*100cCf 160224*100dCf 160274*100dCf 0.512 0.512 0.512 0.157 0.197 0.197 0.374 0.433 0.433 0.394 0.394 0.394 0.031 0.031 0.031 13.0 13.0 13.0 4.0 5.0 5.0 9.5 11.0 11.0 10.0 10.0 10.0 0.8 0.8 0.8 .33 .33 .39 160334*100eCf 160334*100fCf 160394*100eCf 0.512 0.709 0.512 0.236 0.197 0.236 0.472 0.433 0.472 0.394 0.591 0.394 0.031 0.031 0.031 13.0 18.0 13.0 6.0 5.0 6.0 12.0 11.0 12.0 10.0 15.0 10.0 0.8 0.8 0.8 .39 .47 .47 160394*100fCf 160474*100eCf 160474*100fCf 0.709 0.512 0.709 0.197 0.236 0.197 0.433 0.472 0.433 0.591 0.394 0.591 0.031 0.031 0.031 18.0 13.0 18.0 5.0 6.0 5.0 11.0 12.0 11.0 15.0 10.0 15.0 0.8 0.8 0.8 .56 .68 .82 160564*100gCf 160684*100gCf 160824*100hCf 0.709 0.709 0.709 0.236 0.236 0.295 0.472 0.472 0.531 0.591 0.591 0.591 0.031 0.031 0.031 18.0 18.0 18.0 6.0 6.0 7.5 12.0 12.0 13.5 15.0 15.0 15.0 0.8 0.8 0.8 1.0 1.5 2.2 160105*100hCf 160155*100mCf 160225*100nCf 0.709 1.043 1.043 0.295 0.276 0.335 0.531 0.650 0.669 0.591 0.886 0.886 0.031 0.031 0.031 18.0 26.5 26.5 7.5 7.0 8.5 13.5 16.5 17.0 15.0 22.5 22.5 0.8 0.8 0.8 3.3 4.7 6.8 10.0 160335*100oCf 160475*100pCf 160685*100qCf 160106*100sCf 1.043 1.260 1.260 1.457 0.394 0.433 0.512 0.709 0.748 0.787 0.886 1.299 0.886 1.083 1.083 1.083 0.031 0.031 0.031 0.031 26.5 32.0 32.0 37.0 10.0 11.0 13.0 18.0 19.0 20.0 22.5 33.0 22.5 27.5 27.5 27.5 0.8 0.8 0.8 0.8 160 vdc .10 160104*160cCf 0.512 0.157 0.374 0.394 0.031 13.0 4.0 9.5 10.0 0.8 250 vdc .033 .039 .047 160333*250cCf 160393*250cCf 160473*250cCf 0.512 0.512 0.512 0.157 0.157 0.157 0.374 0.374 0.374 0.394 0.394 0.394 0.031 0.031 0.031 13.0 13.0 13.0 4.0 4.0 4.0 9.5 9.5 9.5 10.0 10.0 10.0 0.8 0.8 0.8 .056 .068 .082 160563*250cCf 160683*250cCf 160823*250dCf 0.512 0.512 0.512 0.157 0.157 0.197 0.374 0.374 0.433 0.394 0.394 0.394 0.031 0.031 0.031 13.0 13.0 13.0 4.0 4.0 5.0 9.5 9.5 11.0 10.0 10.0 10.0 0.8 0.8 0.8 .10 .10 .12 160104*250dCf 160104*250fCf 160124*250dCf 0.512 0.709 0.512 0.197 0.197 0.236 0.433 0.433 0.472 0.394 0.591 0.394 0.031 0.031 0.031 13.0 18.0 13.0 5.0 5.0 6.0 11.0 11.0 12.0 10.0 15.0 10.0 0.8 0.8 0.8 .12 .15 .15 160124*250fCf 160154*250eCf 160154*250fCf 0.709 0.512 0.709 0.197 0.236 0.197 0.433 0.472 0.433 0.591 0.394 0.591 0.031 0.031 0.031 18.0 13.0 18.0 5.0 6.0 5.0 11.0 12.0 11.0 15.0 10.0 15.0 0.8 0.8 0.8 .18 .18 .22 160184*250eCf 160184*250fCf 160224*250fCf 0.512 0.709 0.709 0.236 0.197 0.197 0.472 0.433 0.433 0.394 0.591 0.591 0.031 0.031 0.031 13.0 18.0 18.0 6.0 5.0 5.0 12.0 11.0 11.0 10.0 15.0 15.0 0.8 0.8 0.8 .27 .33 .39 160274*250gCf 160334*250gCf 160394*250hCf 0.709 0.709 0.709 0.236 0.236 0.295 0.472 0.472 0.531 0.591 0.591 0.591 0.031 0.031 0.031 18.0 18.0 18.0 6.0 6.0 7.5 12.0 12.0 13.5 15.0 15.0 15.0 0.8 0.8 0.8 .47 .47 .56 160474*250hCf 160474*250lCf 160564*250iCf 0.709 1.043 0.709 0.295 0.236 0.335 0.531 0.591 0.571 0.591 0.886 0.591 0.031 0.031 0.031 18.0 26.5 18.0 7.5 6.0 8.5 13.5 15.0 14.5 15.0 22.5 15.0 0.8 0.8 0.8 .56 .68 .68 .82 160564*250mCf 160684*250iCf 160684*250mCf 160824*250mCf 1.043 0.709 1.043 1.043 0.276 0.335 0.276 0.335 0.650 0.571 0.650 0.669 0.886 0.591 0.886 0.886 0.031 0.031 0.031 0.031 26.5 18.0 26.5 26.5 7.0 8.5 7.0 8.5 16.5 14.5 16.5 17.0 22.5 15.0 22.5 22.5 0.8 0.8 0.8 0.8 * indicates capacitance tolerance: j = 5%, k = 10%, m = 20% type 160 metallized polyester radial lead capacitors cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 ? www.cde.com
rohs compliant cap (f) catalog part number inches millimeters l t h s ?d l t h s ?d 250 vdc 1.0 1.5 2.2 160105*250nCf 160155*250oCf 160225*250pCf 1.043 1.043 1.260 0.335 0.394 0.433 0.669 0.748 0.787 0.886 0.886 1.083 0.031 0.031 0.031 26.5 26.5 32.0 8.5 10.0 11.0 17.0 19.0 20.0 22.5 22.5 27.5 0.8 0.8 0.8 3.3 4.7 6.8 160335*250qCf 160475*250rCf 160685*250sCf 1.260 1.260 1.457 0.512 0.591 0.709 0.886 1.181 1.299 1.083 1.083 1.083 0.031 0.031 0.031 32.0 32.0 37.0 13.0 15.0 18.0 22.5 30.0 33.0 27.5 27.5 27.5 0.8 0.8 0.8 400 vdc .012 .015 .018 160123*400cCf 160153*400cCf 160183*400cCf 0.512 0.512 0.512 0.157 0.157 0.157 0.374 0.374 0.374 0.394 0.394 0.394 0.031 0.031 0.031 13.0 13.0 13.0 4.0 4.0 4.0 9.5 9.5 9.5 10.0 10.0 10.0 0.8 0.8 0.8 .022 .027 .033 160223*400cCf 160273*400cCf 160333*400dCf 0.512 0.512 0.512 0.157 0.157 0.197 0.374 0.374 0.433 0.394 0.394 0.394 0.031 0.031 0.031 13.0 13.0 13.0 4.0 4.0 5.0 9.5 9.5 11.0 10.0 10.0 10.0 0.8 0.8 0.8 .039 .047 .047 160393*400dCf 160473*400eCf 160473*400fCf 0.512 0.512 0.709 0.197 0.236 0.197 0.433 0.472 0.433 0.394 0.394 0.591 0.031 0.031 0.031 13.0 13.0 18.0 5.0 6.0 5.0 11.0 12.0 11.0 10.0 10.0 15.0 0.8 0.8 0.8 .056 .068 .082 160563*400fCf 160683*400fCf 160823*400fCf 0.709 0.709 0.709 0.197 0.197 0.197 0.433 0.433 0.433 0.591 0.591 0.591 0.031 0.031 0.031 18.0 18.0 18.0 5.0 5.0 5.0 11.0 11.0 11.0 15.0 15.0 15.0 0.8 0.8 0.8 .10 .12 .15 160104*400gCf 160124*400gCf 160154*400hCf 0.709 0.709 0.709 0.236 0.236 0.295 0.472 0.472 0.531 0.591 0.591 0.591 0.031 0.031 0.031 18.0 18.0 18.0 6.0 6.0 7.5 12.0 12.0 13.5 15.0 15.0 15.0 0.8 0.8 0.8 .15 .18 .22 160154*400lCf 160184*400lCf 160224*400lCf 1.043 1.043 1.043 0.236 0.236 0.236 0.591 0.591 0.591 0.886 0.886 0.886 0.031 0.031 0.031 26.5 26.5 26.5 6.0 6.0 6.0 15.0 15.0 15.0 22.5 22.5 22.5 0.8 0.8 0.8 .27 .33 .39 160274*400mCf 160334*400mCf 160394*400nCf 1.043 1.043 1.043 0.276 0.276 0.335 0.650 0.650 0.669 0.886 0.886 0.886 0.031 0.031 0.031 26.5 26.5 26.5 7.0 7.0 8.5 16.5 16.5 17.0 22.5 22.5 22.5 0.8 0.8 0.8 .47 .56 .68 160474*400nCf 160564*400oCf 160684*400pCf 1.043 1.043 1.260 0.335 0.394 0.433 0.669 0.748 0.787 0.886 0.886 1.083 0.031 0.031 0.031 26.5 26.5 32.0 8.5 10.0 11.0 17.0 19.0 20.0 22.5 22.5 27.5 0.8 0.8 0.8 .82 1.0 1.0 160824*400pCf 160105*400pCf 160105*400qCf 1.260 1.260 1.260 0.433 0.433 0.512 0.787 0.787 0.886 1.083 1.083 1.083 0.031 0.031 0.031 32.0 32.0 32.0 11.0 11.0 13.0 20.0 20.0 22.5 27.5 27.5 27.5 0.8 0.8 0.8 630 vdc .0039 .0047 .0056 160392*630cCf 160472*630cCf 160562*630cCf 0.512 0.512 0.512 0.157 0.157 0.157 0.374 0.374 0.374 0.394 0.394 0.394 0.031 0.031 0.031 13.0 13.0 13.0 4.0 4.0 4.0 9.5 9.5 9.5 10.0 10.0 10.0 0.8 0.8 0.8 .0068 .0082 .010 160682*630cCf 160822*630cCf 160103*630cCf 0.512 0.512 0.512 0.157 0.157 0.157 0.374 0.374 0.374 0.394 0.394 0.394 0.031 0.031 0.031 13.0 13.0 13.0 4.0 4.0 4.0 9.5 9.5 9.5 10.0 10.0 10.0 0.8 0.8 0.8 .012 .015 .018 160123*630dCf 160153*630dCf 160183*630dCf 0.512 0.512 0.512 0.197 0.197 0.197 0.433 0.433 0.433 0.394 0.394 0.394 0.031 0.031 0.031 13.0 13.0 13.0 5.0 5.0 5.0 11.0 11.0 11.0 10.0 10.0 10.0 0.8 0.8 0.8 .022 .027 .033 160223*630eCf 160273*630fCf 160333*630fCf 0.512 0.709 0.709 0.236 0.197 0.197 0.472 0.433 0.433 0.394 0.591 0.591 0.031 0.031 0.031 13.0 18.0 18.0 6.0 5.0 5.0 12.0 11.0 11.0 10.0 15.0 15.0 0.8 0.8 0.8 .039 .047 .056 160393*630gCf 160473*630gCf 160563*630gCf 0.709 0.709 0.709 0.236 0.236 0.236 0.472 0.472 0.472 0.591 0.591 0.591 0.031 0.031 0.031 18.0 18.0 18.0 6.0 6.0 6.0 12.0 12.0 12.0 15.0 15.0 15.0 0.8 0.8 0.8 * indicates capacitance tolerance: j = 5%, k = 10%, m = 20% cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 ? www.cde.com type 160 metallized polyester radial lead capacitors
rohs compliant cap (f) catalog part number inches millimeters l t h s ?d l t h s ?d 630 vdc .068 .068 .082 160683*630hCf 160683*630lCf 160823*630lCf 0.709 1.043 1.043 0.295 0.236 0.236 0.531 0.591 0.591 0.591 0.886 0.886 0.031 0.031 0.031 18.0 26.5 26.5 7.5 6.0 6.0 13.5 15.0 15.0 15.0 22.5 22.5 0.8 0.8 0.8 .10 .12 .15 160104*630lCf 160124*630mCf 160154*630mCf 1.043 1.043 1.043 0.236 0.276 0.276 0.591 0.650 0.650 0.886 0.886 0.886 0.031 0.031 0.031 26.5 26.5 26.5 6.0 7.0 7.0 15.0 16.5 16.5 22.5 22.5 22.5 0.8 0.8 0.8 .18 .22 .27 160184*630nCf 160224*630nCf 160274*630qCf 1.043 1.043 1.260 0.335 0.335 0.512 0.669 0.669 0.886 0.886 0.886 1.083 0.031 0.031 0.031 26.5 26.5 32.0 8.5 8.5 13.0 17.0 17.0 22.5 22.5 22.5 27.5 0.8 0.8 0.8 .33 .39 .47 160334*630pCf 160394*630pCf 160474*630qCf 1.260 1.260 1.260 0.433 0.433 0.512 0.787 0.787 0.886 1.083 1.083 1.083 0.031 0.031 0.031 32.0 32.0 32.0 11.0 11.0 13.0 20.0 20.0 22.5 27.5 27.5 27.5 0.8 0.8 0.8 1000 vdc .0022 .0027 .0033 160222*1000cCf 160272*1000cCf 160332*1000cCf 0.512 0.512 0.512 0.157 0.157 0.157 0.374 0.374 0.374 0.394 0.394 0.394 0.031 0.031 0.031 13.0 13.0 13.0 4.0 4.0 4.0 9.5 9.5 9.5 10.0 10.0 10.0 0.8 0.8 0.8 .0039 .0047 .0056 160392*1000dCf 160472*1000dCf 160562*1000dCf 0.512 0.512 0.512 0.197 0.197 0.197 0.433 0.433 0.433 0.394 0.394 0.394 0.031 0.031 0.031 13.0 13.0 13.0 5.0 5.0 5.0 11.0 11.0 11.0 10.0 10.0 10.0 0.8 0.8 0.8 .0068 .0082 .010 160682*1000dCf 160822*1000dCf 160103*1000fCf 0.512 0.512 0.709 0.197 0.197 0.197 0.433 0.433 0.433 0.394 0.394 0.591 0.031 0.031 0.031 13.0 13.0 18.0 5.0 5.0 5.0 11.0 11.0 11.0 10.0 10.0 15.0 0.8 0.8 0.8 .012 .015 .018 160123*1000fCf 160153*1000fCf 160183*1000gCf 0.709 0.709 0.709 0.197 0.236 0.236 0.433 0.472 0.472 0.591 0.591 0.591 0.031 0.031 0.031 18.0 18.0 18.0 5.0 6.0 6.0 11.0 12.0 12.0 15.0 15.0 15.0 0.8 0.8 0.8 .022 .027 .033 160223*1000gCf 160273*1000hCf 160333*1000lCf 0.709 0.709 1.043 0.236 0.295 0.236 0.472 0.531 0.591 0.591 0.591 0.886 0.031 0.031 0.031 18.0 18.0 26.5 6.0 7.5 6.0 12.0 13.5 15.0 15.0 15.0 22.5 0.8 0.8 0.8 .039 .047 .056 160393*1000lCf 160473*1000lCf 160563*1000mCf 1.043 1.043 1.043 0.236 0.236 0.276 0.591 0.591 0.650 0.886 0.886 0.886 0.031 0.031 0.031 26.5 26.5 26.5 6.0 6.0 7.0 15.0 15.0 16.5 22.5 22.5 22.5 0.8 0.8 0.8 .068 .082 .10 160683*1000mCf 160823*1000nCf 160104*1000nCf 1.043 1.043 1.043 0.276 0.335 0.335 0.650 0.669 0.669 0.886 0.886 0.886 0.031 0.031 0.031 26.5 26.5 26.5 7.0 8.5 8.5 16.5 17.0 17.0 22.5 22.5 22.5 0.8 0.8 0.8 .12 .15 .18 .22 160124*1000oCf 160154*1000pCf 160184*1000qCf 160224*1000qCf 1.043 1.260 1.260 1.260 0.394 0.433 0.512 0.512 0.748 0.787 0.886 0.886 0.886 1.083 1.083 1.083 0.031 0.031 0.031 0.031 26.5 32.0 32.0 32.0 10.0 11.0 13.0 13.0 19.0 20.0 22.5 22.5 22.5 27.5 27.5 27.5 0.8 0.8 0.8 0.8 * indicates capacitance tolerance: j = 5%, k = 10%, m = 20% part numbering system 160 104 k 100 c Cf series 160 capacitance 392 = .0039 f 103 = .01 f 104 = .1 f 105 = 1.0 f tolerance j = 5% k = 10% m = 20% voltage 100 = 100 vdc 250 = 250 vdc 630 = 630 vdc 1000 = 1000 vdc case code c d e f etc. rohs compliant type 160 metallized polyester radial lead capacitors cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 ? www.cde.com
notice and disclaimer: all product drawings, descriptions, specifcations, statements, information and data (collectively, the information) in this datasheet or other publication are subject to change. the customer is responsible for checking, confrming and verifying the extent to which the information con - tained in this datasheet or other publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without any guaran - tee, warranty, representation or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on the knowledge that the cornell dubilier company providing such statements (cornell dubilier) has of operating conditions that such cornell dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representa - tion regarding any such matter C and cornell dubilier specifcally and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specifc customer application, use, storage, transportation, or operating environment. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by cornell dubilier with reference to the use of any cornell dubilier products is given gratis (unless otherwise specifed by cornell dubilier), and cornell dubilier assumes no obligation or liability for the advice given or results obtained. although cornell dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indi - cated in such warnings, cautions and notes, or that other safety measures may not be required. cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 ? www.cde.com type 160 metallized polyester radial lead capacitors
|
