universal input ac-dc pcb open frame single & dual output 13-15 watts internal switching power supplies tpvi13 series fea tures: accommodate universal ac sources low -profile & compact pcb format meet universal safety standards emi meet cispr pub. 22 & fcc class b ce marking compliance output specification output voltage: see ratings chart. output current: see ratings chart. output wattage: typ. 13-15watts. output connector: molex # 5045. line regulation: typ. 0.1%. load regulation: main vo1 typ. 2.0%. aux. vo2 typ. 5.0% (stacked on). noise & ripple: typ. 1.0% peak to peak. ovp: built-in at vo1 (zener diode). adjustability: available at vo1. overload protection (olp): fully protected against output overload and short circuit. olp set at about 125-150% rating output wattage. consult the factory for olp setting. specification input specification input voltage: range typ. 90-264vac. rating 100 to 240vac. input connector: molex # 5045. input frequency: 47-63hz inrush current: typ. 26.0a @230vac. input current: typ. 0.30a @115vac, 0.15a@230vac. dielectric withstand: meet iec 60950-1. emi: meet cispr pub. 22 & fcc class b. hold-up time: typ. 10ms @115vac, 40ms @230vac. earth leakage: typ. 0.25ma @230vac. general specification efficiency: typ. 70-80%. switching frequency: 40 khz. circuit topology: fixed frequency flyback circuit. transient response: output voltage returns in less than 3ms following a 25% load change. safety standard: iec 60950-1/ul 60950-1 class ii. operating temperature: 0 to +50c. storage temperature: -20 to +85c. temperature coefficient: typ. 0.04%/c. cooling: free air convection. construction: pcb open frame format. power density: 2.12 watts / cubic inch. note: due to requests in market and advances in technol ogy, specifications subject to change without notification.
output voltage / current ratings chart mechanical dimensions: mm [inches] weight: 62.0g (2.19 oz.) tpvi13-s033030 3.0a 3.3v 3.7a TPVI13-S050028 2.8a 5.0v 3.4a tpvi13-s120012 1.2a 12.0v 1.5a tpvi13-s150010 1.0a 15.0v 1.2a tpvi13-s240006 0.6a 24.0v 0.8a tpvi13-s480003 0.3a 48.0v 0.4a dual output main vo1 ? aux. vo2 ? model no. typ. volt. max. typ. volt. max. tpvi13-d033i 2.5a +3.3v 3.5a 0.4a +12v 0.5a tpvi13-d033k 2.5a +3.3v 3.5a 0.3a +15v 0.4a tpvi13-d033m 2.5a +3.3v 3.5a 0.2a +24v 0.2a tpvi13-d050i 2.0a +5.0v 2.5a 0.4a +12v 0.5a tpvi13-d050k 2.0a +5.0v 2.5a 0.3a +15v 0.4a tpvi13-d050m 2.0a +5.0v 2.5a 0.2a +24v 0.2a symbol: " ? " ovp built-in. " ? " stacked on main output. remark: (1) at least 20% of typical main output current is required to maintain stated regulation. (2) peak output, less than 60 sec. with 10% duty cycle. (3) max. current can't be drawn from all output at the same time. input & output connectors pin assignment ac input single output dual output assignment ac-line ac-neutral +vo1 dc-com vo1 vo2 dc-com connector & pin # p1-l p1-n p2-4,5 p2-1,2 p2-4,5 p2-3 p2-1,2 mating connector: molex 5051series or equivalent.
|
