typical performance data maximum ratings operating temperature -55c to 100c storage temperature -55c to 100c control current 30ma 0 20 40 60 80 100 0 90 180 270 360 450 isolation (db) frequency (mhz) gas -1+ isolation in-out in-con GAS-1+ 50 ? bi-phase 5 to 450 mhz attenuator/switch rev. d m153690 GAS-1 wp/td/cp/am 151112 plug-in 1 10 100 0.0001 0.001 0.01 0.1 1 10 100 attenuation (db) control current (ma) gas -1+ attenuation 5 mhz 225 mhz 450 mhz features ? wideband, 5 to 450 mhz ? rugged case, low profle ? excellent amplitude and phase unbalance applications ? bi-phase modulator ? electronic attenuator pin connections input 1 output 8 control 3,4^ ground 2,5,6,7 case ground 2 2.8 3.0 3.2 3.4 3.6 3.8 0 90 180 270 360 450 insertion loss (db) frequency (mhz) gas -1+ insertion loss suggested control port biasing confguration case style: a05 ^ pins must be connected together externally outline drawing outline dimensions ( ) a b c d e f .770 .800 .240 .250 .370 .400 19.56 20.32 6.10 6.35 9.40 10.16 g h j k wt .200 .20 .14 .031 grams 5.08 5.08 3.56 0.79 3.7 inch mm attenuator/switch electrical specifcations freq. (mhz) i. loss (db) at 20ma control, 20ma isolation (db) (in-out) (in-con) input r. loss (db) control current (ma) attenuation (db) phase ? ref at 15ma ctrl input vswr 5 mhz 225 mhz 450 mhz 5 mhz 225 mhz 450 mhz 5 mhz 225 mhz 450 mhz ?amp (db) ?phase (deg.) x x x x x x deg. deg. deg. l = low range [f l to 10 f l ] m = mid range [10 f l to f u /2] u = upper range [f u /2 to f u ] m = [ 2 f l to f u /2] performance specifcations apply for input power up to 10 db below stated 1 db compression. frequency (mhz) insertion loss (db) 20 ma max. input pwr (dbm) 20 ma in-out isolation (db) 0 ma bi-phase x ( 20 ma) typ. ? amp (db) phase (deg.) deviation from 180 in con mid-band m total range 1 db no l m u total total f l -f u ty p. max. ty p. max. compr. damage ty p. min. ty p. min. ty p. min. m range m range 5-450 dc-0.05 3.3 4 3.5 5.0 20 25 60 48 45 35 35 25 0.10 0.1 1.0 1.5 5.0 3.27 0.025 0.02 179.9 74 50 11.8 0.0000 68.1 50.0 41.3 -52.4 124.7 108.2 2.9 2.9 2.6 9.5 2.93 0.019 0.02 179.9 68 44 13.4 0.0001 62.8 49.6 41.6 -9.9 119.7 103.2 2.9 2.9 2.6 19.5 2.92 0.017 0.02 179.9 62 38 14.3 0.0002 56.7 49.9 41.3 -18.0 114.6 102.4 2.9 2.9 2.6 35.0 2.97 0.017 0.02 179.9 59 33 14.5 0.0006 51.7 50.5 41.3 -20.7 101.4 95.5 2.9 2.9 2.6 39.5 2.98 0.017 0.03 179.9 59 32 14.5 0.0032 46.6 47.3 40.4 -10.7 58.4 76.3 2.9 2.9 2.6 49.5 3.00 0.017 0.03 179.9 57 30 14.4 0.0058 43.8 44.3 39.0 -6.4 45.6 60.3 2.9 2.9 2.6 74.0 3.00 0.019 0.04 179.8 55 27 14.1 0.0116 39.8 39.6 36.0 -0.4 29.9 43.3 2.8 2.9 2.6 75.1 3.00 0.018 0.03 179.8 55 26 14.1 0.0184 36.6 36.1 33.2 3.3 24.8 33.3 2.8 2.8 2.5 107.4 3.10 0.019 0.04 179.7 53 23 14.3 0.0327 32.6 31.6 29.1 5.9 18.3 23.7 2.8 2.7 2.4 141.8 3.18 0.019 0.04 179.7 51 21 14.6 0.0486 29.5 28.4 26.2 6.9 15.6 19.4 2.7 2.7 2.4 176.3 3.24 0.021 0.04 179.6 49 19 14.5 0.0787 25.9 24.6 22.6 7.6 13.3 14.8 2.6 2.5 2.2 210.8 3.28 0.021 0.04 179.5 48 18 14.6 0.1081 23.5 22.2 20.3 7.9 12.2 12.8 2.5 2.4 2.1 225.3 3.29 0.023 0.04 179.5 48 18 14.7 0.1975 19.1 17.8 16.1 7.8 10.0 9.7 2.2 2.2 1.9 244.2 3.30 0.024 0.04 179.4 47 17 14.8 0.3085 16.0 14.8 13.3 7.4 8.7 7.9 2.0 1.9 1.7 278.7 3.29 0.024 0.04 179.3 46 16 15.1 0.5100 12.9 11.7 10.6 6.5 7.3 6.0 1.7 1.7 1.4 313.2 3.30 0.026 0.05 179.2 46 16 15.1 0.8548 10.1 9.2 8.4 5.3 5.5 4.4 1.5 1.4 1.2 347.7 3.33 0.029 0.05 179.1 45 16 14.8 1.7555 7.2 6.0 6.1 3.3 3.4 2.5 1.3 1.2 1.1 381.0 3.40 0.034 0.05 179.1 44 15 15.0 2.6670 5.4 5.1 4.9 2.0 2.0 1.3 1.3 1.2 1.2 415.5 3.50 0.041 0.06 179.0 43 15 14.7 8.1232 4.0 4.0 4.0 0.5 0.5 0.4 1.5 1.4 1.4 450.0 3.58 0.044 0.06 178.9 43 15 13.7 15.1218 3.5 3.6 3.6 0.0 -0.1 0.0 1.6 1.5 1.4 electrical schematic permanent damage may occur if any of these limits are exceeded. notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
|
