View STTH30AC06C_9011790.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

this is information on a product in full production. july 2015 docid025011 rev3 1/13 13 STTH30AC06C turbo 2 ultrafast high voltage rectifier datasheet ? production data features ? ultrafast switching ? low reverse current ? low thermal resistance ? reduces switching and conduction losses ? insulated package to-3pf: ? insulated voltage: 2500 v dc description the STTH30AC06C uses st turbo 2 600 v technology. it is suited as boost diode specially for use in air conditioning equipment as continuous mode interleaved power factor correction. . $ $ . $ $ 723) $ . $ 723/ 72// . $ $ table 1. device summary symbol value i f(av) 2 x 15a v rrm 600 v t rr (typ) 40 ns v f (typ) 1.15 v t j 175 c www.st.com
characteristics STTH30AC06C 2/13 docid025011 rev3 1 characteristics to evaluate the conduction losses use the following equation: p = 1.1 x i f(av) + 0.023 i f 2 (rms) table 2. absolute ratings (limiting values per diode at 25 c, unless otherwise specified) symbol parameter value unit v rrm repetitive peak reverse voltage 600 v i f(rms) forward rms current 30 a i f(av) average forward current per diode 15 a per device 30 i fsm surge non repetitive forward current t p = 10 ms sinusoidal 140 a t stg storage temperature range -65 to +175 c t j maximum operating junction temperature 175 c table 3. thermal parameters symbol parameter value unit r th(j-c) junction to case (to3p-3l, to247 ll) per diode 1.5 c/w to t a l 0 . 8 5 r th(c) coupling (to3p-3l, to247 ll) 0.2 r th(j-c) junction to case (to-3pf) per diode 3.5 total 2.7 r th(c) coupling (to-3pf) 1.9 table 4. static electrical characteristics (per diode) symbol parameter test conditions min. typ. max. unit i r (1) reverse leakage current t j = 25 c v r = v rrm -10 a t j = 150 c - 40 400 v f (2) forward voltage drop t j = 25 c i f = 15 a -1.95 v t j = 150 c - 1.15 1.45 t j = 25 c i f = 30 a -2.25 t j = 150 c - 1.42 1.8 1. pulse test: t p = 5 ms, < 2% 2. pulse test: t p = 380 s, < 2%
docid025011 rev3 3/13 STTH30AC06C characteristics table 5. dynamic characteristics (per diode) symbol parameter test conditions min. typ. max. unit t rr reverse recovery time t j = 25 c i f = 0.5 a, i rr = 0.25 a, i r = 1 a - 30 ns i f = 1 a, v r = 30 v, di f /dt = 50 a/s - 40 55 i rm reverse recovery current t j = 125 c i f = 15 a, v r = 400 v, di f /dt = 100 a/s -45.5a t fr forward recovery time t j = 25 c i f = 15 a, v fr = 1.9 v, di f /dt = +100 a/s - 100 ns v fp forward recovery voltage - 2.5 v figure 1. average forward power dissipation versus average forward current (per diode) figure 2. forward voltage drop versus forward current (typical values, per diode) 0 5 10 15 20 25 30 0 2 4 6 8 101214161820 p f ( av ) ( w ) = 0.05 = 0.2 = 0.1 =1 = 0.5 t =tp/t tp i f(av) (a) i f (a) 0.1 1.0 10.0 100.0 0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 v f (v) t = 25 c j t = 150 c j figure 3. forward voltage drop versus forward current (maximum values, per diode) figure 4. relative variation of thermal impedance, junction to case, versus pulse duration (to3p-3l, to247 ll) 0.1 1.0 10.0 100.0 0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 v f (v) t = 25 c j i f (a) t = 150 c j z t h(j-c) / r t h(j-c) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.e-04 1.e-03 1.e-02 1.e-01 1.e+00 to3p-3l / to-247 ll single pulse t (s) p
characteristics STTH30AC06C 4/13 docid025011 rev3 figure 5. relative variation of thermal impedance, junction to case, versus pulse duration (to-3pf) figure 6. peak reverse recovery current versus di f /dt (typical values, per diode) z t h(j-c) /r t h(j-c) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.e-03 1.e-02 1.e-01 1.e+00 1.e+01 1.e+02 t (s) p single pulse to - 3pf 0 4 8 12 16 0 50 100 150 200 250 300 350 400 450 500 i rm (a) i f = 15 a v r = 400 v t j = 125 c dl f /dt(a/s) figure 7. reverse recovery time versus di f /dt (typical values, per diode) figure 8. reverse recovery charges versus di f /dt (typical values, per diode) t rr (ns) 0 50 100 150 200 250 300 350 400 0 50 100 150 200 250 300 350 400 450 500 dl f /dt(a/s) i f = 15 a v r = 400 v t j = 125 c 0 100 200 300 400 500 600 700 800 0 50 100 150 200 250 300 350 400 450 500 i f = 15 a v r = 400 v t j = 125 c dl f /dt(a/s) q rr ( n c ) figure 9. reverse recovery softness factor versus di f /dt (typical values, per diode) figure 10. relative variations of dynamic parameters versus junction temperature 0.0 0.5 1.0 1.5 2.0 0 50 100 150 200 250 300 350 400 450 500 dl f /dt(a/s) i f = 15 a v r = 400 v t j = 125 c s factor 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 25 50 75 100 125 i rm s factor q rr i f = 15 a v r = 400 v reference: t j = 125 c t j (c)
docid025011 rev3 5/13 STTH30AC06C characteristics figure 11. transient peak forward voltage versus di f /dt (typical values, per diode) figure 12. forward recovery time versus di f /dt (typical values, per diode) 0 2 4 6 8 100 150 200 250 300 350 400 450 500 dl f /dt(a/s) v fp (v) i f = 15 a t j = 125 c 0 20 40 60 80 100 120 100 150 200 250 300 350 400 450 500 t fr (ns) i f = 15 a v fr = 1.5 v t j = 125 c dl f /dt(a/s) figure 13. junction capacitance versus reverse voltage applied (typical values, per diode) 10 100 1000 1 10 100 1000 f = 1 mhz v osc = 30 mv rms t j = 25 c v c(pf) r (v)
package information STTH30AC06C 6/13 docid025011 rev3 2 package information ? epoxy meets ul94, v0 ? cooling method: by conduction (c) ? recommended torque (to-3pf): 0.4 to 0.6 nm ? maximum torque value (to-247 ll): 1.0 nm in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark. 2.1 to3p-3l package information figure 14. to3p-3l package outline 3urmhfwlrq ( ( / $ ' / ' e f / h e [ e [ 4 $ $ ?3 6hdwlqjsodqh 4 (
docid025011 rev3 7/13 STTH30AC06C package information table 6. to3p-3l package mechanical data ref. dimensions millimeters inches min. typ. max. min. typ. max. a 4.6 5 0.18 0.19 a1 1.45 1.5 1.65 0.05 0.06 0.06 a2 1.20 1.40 1.60 0.04 0.05 0.06 b 0.80 1 1.20 0.03 0.04 0.05 b1 1.80 2.20 0.07 0.08 b2 2.80 3.20 0.11 0.12 c 0.55 0.60 0.75 0.02 0.02 0.03 d 19.70 19.90 20.10 0.77 0.78 0.79 d1 13.90 0.54 e 15.40 15.80 0.60 0.62 e1 13.60 0.53 e2 9.60 0.38 e 5.15 5.45 5.75 0.20 0.21 0.22 l 19.50 20 20.50 0.76 0.78 0.80 l1 3.50 0.14 l2 18.20 18.40 18.60 0.71 0.72 0.73 ?p 3.10 3.30 0.12 0.13 q 5 0.19 q1 3.80 0.15
package information STTH30AC06C 8/13 docid025011 rev3 2.2 to-3pf package information figure 15. to-3pf package outline l5 n r l4 g g1 f(3 ) x e f2(3 ) x l7 l6 d1 d h l2 c a l l3 dia projection
docid025011 rev3 9/13 STTH30AC06C package information table 7. to-3pf mechanical data ref. dimensions millimeters inches min. typ. max. min. typ. max. a 5.30 5.70 0.2 0.22 c 2.80 3.20 0.11 0.12 d 3.10 3.50 0.12 0.13 d1 1.80 2.20 0.07 0.08 e 0.80 1.10 0.03 0.04 f 0.65 0.95 0.025 0.037 f2 1.80 2.20 0.07 0.08 g 10.30 11.50 0.40 0.45 g1 5.45 0.21 h 15.30 15.70 0.60 0.61 l 9.80 10 10.20 0.38 0.39 0.40 l2 22.80 23.20 0.89 0.91 l3 26.30 26.70 1.03 1.05 l4 43.20 44.40 1.70 1.74 l5 4.30 4.70 0.16 1.18 l6 24.30 24.70 0.95 0.97 l7 14.60 15 0.57 0.59 n 1.80 2.20 0.07 0.08 r 3.80 4.20 0.14 0.16 dia 3.40 3.80 0.13 0.15
package information STTH30AC06C 10/13 docid025011 rev3 2.3 to-247 ll package information figure 16. to-247 ll package outline 3 v3 a d dia m e f g v v1 l4 l5 h 2 1 heat-sink plane projection f1 l1 l l3 l2 f2 3 2 1 back view
docid025011 rev3 11/13 STTH30AC06C package information table 8. to-247 ll mechanical data ref. dimensions millimeters inches min. typ. max. min. typ max. a 4.90 5.15 0.192 0.202 d 1.85 2.10 0.072 0.082 e 0.55 0.67 0.021 0.026 f 1.07 1.32 0.042 0.051 f1 1.90 2.38 0.074 0.093 f2 2.87 3.38 0.11 0.133 g 10.90 bsc 0.429 bsc h 15.77 16.02 0.62 0.63 l 20.82 21.07 0.81 0.82 l1 4.16 4.47 0.163 0.175 l2 5.49 5.74 0.216 0.225 l3 20.05 20.30 0.789 0.799 l4 3.68 3.93 0.144 0.154 l5 6.04 6.29 0.237 0.247 m 2.25 2.55 0.088 0.10 v 10 10 v1 3 3 v3 20 20 ? 3.55 3.66 0.139 0.143
ordering information STTH30AC06C 12/13 docid025011 rev3 3 ordering information 4 revision history table 9. ordering information order code marking package weight base qty. delivery mode STTH30AC06Cp STTH30AC06Cp to3p-3l 5.26 30 tube STTH30AC06Cpf th30ac06c to-3pf 5.6 30 tube STTH30AC06Cwl STTH30AC06Cwl to-247 ll 4.36 30 tube table 10. document revision history date revision changes 13-nov-2013 1 first release. 25-jun-2015 2 update of cover page and table 7 . format updated to current standard. 01-jul-2015 3 updated features .
docid025011 rev3 13/13 STTH30AC06C important notice ? please read carefully stmicroelectronics nv and its subsidiaries (?st?) reserve the right to make changes, corrections, enhancements, modifications, and improvements to st products and/or to this document at any time without notice. purchasers should obtain the latest relevant in formation on st products before placing orders. st products are sold pursuant to st?s terms and conditions of sale in place at the time of o rder acknowledgement. purchasers are solely responsible for the choice, selection, and use of st products and st assumes no liability for application assistance or the design of purchasers? products. no license, express or implied, to any intellectual property right is granted by st herein. resale of st products with provisions different from the information set forth herein shall void any warranty granted by st for such product. st and the st logo are trademarks of st. all other product or service names are the property of their respective owners. information in this document supersedes and replaces information previously supplied in any prior versions of this document. ? 2015 stmicroelectronics ? all rights reserved

▲Up To Search▲

Price & Availability of STTH30AC06C

	To Download STTH30AC06C Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .