frequency insertion loss return loss frequency group delay (mhz) (db) (db) (mhz) (nsec) x 0.5 0.08 0.01 25.94 0.5 132.84 2.7 0.20 0.01 34.92 1.2 117.19 2.7 0.20 0.01 34.92 1.4 120.85 4.5 0.49 0.02 30.78 1.6 124.16 4.7 0.56 0.02 33.74 1.8 124.15 5.3 1.02 0.04 22.84 2.0 127.50 5.6 2.09 0.32 10.91 2.5 131.07 5.8 4.70 0.75 4.32 3.0 142.83 6.0 9.43 1.03 1.65 3.5 160.70 6.2 15.17 1.09 0.78 4.0 182.44 6.6 27.16 1.10 0.33 4.5 223.68 7.4 57.30 1.96 0.16 4.7 245.95 15.0 52.02 0.24 0.07 4.8 255.31 23.0 61.33 0.16 0.07 5.0 295.98 40.0 69.54 0.59 0.10 5.2 352.27 100.0 65.17 0.41 0.14 5.3 385.52 200.0 57.06 0.25 0.18 5.4 438.20 400.0 58.40 0.26 0.22 5.5 484.24 600.0 55.96 0.30 0.27 5.6 521.62 rev. a m151121 edr-7478/1u sxlp-4.7+ urj/rav 170123 page 1 of 1 50 ? dc to 4.7 mhz maximum ratings operating temperature -40 o c to 85 o c storage temperature -55 o c to 100 o c rf power input 0.5w max. input 1 output 8 ground 2, 3, 4, 5, 6, 7 pin connections surface mount sxlp-4.7+ low pass filter low pass filter electrical specifcations (t amb = 25 o c) typical performance data at 25 o c applications ? defense communications ? receivers / transmitters ? harmonic rejection features ? high rejection ? sharp cut-off ? shielded package ? aqueous washable ? low cost case style: hf1139 typical frequency response functional schematic sxlp-4.7+ group delay 0 100 200 300 400 500 600 0.0 0.8 1.6 2.4 3.2 4.0 4.8 5.6 frequency (mhz) group delay (nsec) sxlp-4.7+ insertion loss 0 20 40 60 80 0 1 10 100 1000 frequency (mhz) insertion loss (db) sxlp-4.7+ return loss 0 10 20 30 40 0 1 10 100 1000 frequency (mhz) return loss (db) passband fco, mhz stopband vswr (:1) (mhz) nom. (mhz) passband stopband (loss < 1db) (loss 3db) (loss > 20db) (loss > 40db) typ. typ. dc - 4.7 5.6 6.6 - 7.4 7.4 - 600 1.25 18 rf in rf out 40 db 20 db 3 d b 1 db frequency / fco attenuation, db dc 0.9 1 1.35 1.75 3 40 db 20 db 1 db 3 db 20 db 40 db dc 0.86 1 1.25 1.35 attenuation, db frequency / f co 107 permanent damage may occur if any of these limits are exceeded. outline drawing notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com demo board mcl p/n: tb-368 suggested pcb layout (pl-230) outline dimensions ( ) inch mm a b c d e f .44 .74 .27 .200 .07 .060 11.18 18.80 6.86 5.08 1.78 1.52 g h j k l m wt. .040 .660 .200 .470 .055 .060 grams 1.02 16.76 5.08 11.94 1.40 1.52 3.0 pcb land pattern suggested layout, tolerance to be within .002 +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
|
