input frequency (mhz) conversion loss (db) harmonic output (-dbc) f2 f1 f3 f4 typical performance data 1.00 13.72 50.00 58.00 13.90 5.00 12.35 50.80 57.00 15.00 10.00 12.29 57.70 64.00 18.00 25.00 12.34 51.00 64.00 18.50 50.00 12.47 47.20 60.80 18.70 100.00 12.35 41.80 55.20 18.90 200.00 12.26 33.40 50.00 20.80 300.00 12.94 35.60 53.60 22.00 400.00 13.94 34.00 34.50 24.40 500.00 13.88 38.20 32.50 29.60 x2 AK-2+ conversion loss 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 0 200 400 600 800 1000 output frequency (mhz) conversion loss (db) AK-2+ harmonic output f3 30 40 50 60 70 0 300 600 900 1200 1500 f3 frequency (mhz) harmonic output (-dbc) AK-2+ harmonic output f1 30 35 40 45 50 55 60 0 100 200 300 400 500 f1 frequency (mhz) harmonic output (-dbc) AK-2+ harmonic output f4 0 10 20 30 40 50 60 0 500 1000 1500 2000 f4 frequency (mhz) harmonic output (-dbc) 50 ? output 2 to 1000 mhz frequency multiplier case style: a03 outline dimensions ( ) inch mm maximum ratings pin connections input 1,3,4^ output 8 ground 2,5,6,7 case ground 2,5,6,7 outline drawing electrical specifcations rev. d m151107 AK-2+ ad/cp/am 150527 abcde f .480 .500 .390 .405 .210 .230 12.19 12.70 9.91 10.29 5.33 5.84 g h j k wt .100 .20 .14 .020 grams 2.54 5.08 3.56 0.51 2.3 AK-2+ operating temperature -55c to 100c storage temperature -55c to 100c rf input power 200mw features ? wideband, 2 to 1000 mhz ? low conversion loss, 13.5 db typ. ? hermetic case applications ? synthesizers ? local oscillators ? military, hi-rel applications * harmonics of input frequency below the power level of f2 ^ pins must be connected together externally multiplication factor frequency (mhz) input power (dbm) conversion loss (db) *harmonic output (dbc) f1 f2 f1 f3 f4 input output min. max. ty p. max. ty p. min. ty p. min. ty p. min. 2 1-100 2-200 1 10 13.0 15.0 40 30 50 40 16 12 100-300 200-600 1 10 13.5 15.5 25 20 40 30 16 12 300-500 600-1000 1 10 14.0 17.5 20 15 30 25 16 12 permanent damage may occur if any of these limits are exceeded. notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
|
