spe - 12 - 8 - 138/c /wy page 1 of 3 specification part no. : pcb.mmcxfstj. ht product name : mmcx (f) jack C vertical pcb through hole jack feature : mmcx (f) jack vertical pcb through hole jack frequency range: dc up to 6 ghz finish: gold leg length: 3.0 mm total length: 7.5 mm rohs compl iant
spe - 12 - 8 - 138/c /wy page 2 of 3 1. introduction the pcb.mmcxfstj. ht connector was designed to be mounted on a pcb . t he maximum thickness of pcb that the connector can be used with is 2.5 mm. the con nector pin is directly soldered on to pads on the pcb . the connector is a stan d ard mmcx (f) jack . taoglas connectors are all rohs compliant. 2. specification electrical impedance 50? frequency range dc ~ 6 ghz working voltage max. 170 v rms dielectric withstanding voltage 500 vrms insulation resistance 1 00 0 m m? mechanical conne ctor dimension 7.5mm* ? 3.5mm max. thickness pcb acceptable 2.5 mm connector pin diameter 0.7 mm c onnector type mmcx(f) vertical pcb thru hole jack environmental rohs compliant operating temperature - 40 c to +85 c
spe - 12 - 8 - 138/c /wy page 3 of 3 3. connector drawing name material finish qty 1 body phosphor bronze gold 1 2 insulator teflon white 1 3 female contact phosphor bronze gold 1 taoglas makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. taoglas reserves all rights to this document and the information contained herein. reproduction, use or disclosure to third p arties without express permission is strictly prohibited. copyright ? 2012, taoglas ltd.
|
