|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
saw components saw duplexer wcdma band 4/ cdma 1x aws band series/type: ordering code: b8517 B39212B8517P810 date: version: june 4, 2013 2.0 ? epcos ag 2015. reproduction, publicati on and dissemination of this publicatio n, enclosures hereto and the information contained therein without epcos' pr ior express consent is prohibited. epcos ag is a tdk group company.
2 june 4, 2013 b8517 1732.5 / 2132.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet application n low-loss saw duplexer for mobile telephone w-cdma band 4 (umts) systems n low insertion attenuation n low amplitude ripple n usable passband 45 mhz n high isolation between tx and rx features n package size 2.0 * 1.6 mm 2 n max. package height 0.47 mm n rohs compatible n approximate weight 0.005 g n package for s urface m ount t echnology ( smt ) n ni terminals, au-plated n e lectrostatic s ensitive d evice ( esd ) n fully matched by integrated matching network n m oisture s ensitive l evel 3 bottom view side view top view 1 2 3 5 6 7 8 4 9 0.43 0.33 0.35 0.29 0.7 0.47 max. 7 5 2 6 1 3 8 4 2.0 1.6 0.29 pin configuration n 3 tx input n 6 antenna n 1 rx output n 2, 4, 5, 7, 8, 9 to be grounded 2,4,5 7,8,9 6 1 3 3 june 4, 2013 b8517 1732.5 / 2132.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics for cdma 1x aws band temperature range for specification: t = C30 ?c to +90 ?c tx terminating impedance: z tx =50 w ant terminating impedance: z ant =50 w ll 2.4 nh rx teminating impedance: z rx =50 w ll 5.6 nh b8517 characteristics tx-antenna min. typ. @ 25 ?c max. center frequency f c 1732.5 mhz maximum insertion attenuation 1710.0 ... 1755.0mhz 1.5 2.0 db @f carrier 1712.4 ... 1752.6mhz a w-cdma 1) 1) attenuation of w-cdma signal (power transfer function). please, refer to page 6. 1.4 1.9 db amplitude ripple (p-p) 1710.0 ... 1755.0mhz 0.4 1.0 db @f carrier 1712.4 ... 1752.6mhz da w-cdma 1) 0.4 0.9 db error vector magnitude evm 2) 2) error vector magnitude (evm) based on definition given in 3gpp ts 25.141 @f carrier 1712.4 ... 1752.6mhz 0.5 2.0 % input vswr (tx port) 1710.0 ... 1755.0mhz 1.8 2.2 output vswr (ant port) 1710.0 ... 1755.0mhz 1.7 2.2 attenuation a 10.0 ... 1559.0mhz 30 47 db 728.0 ... 764.0mhz 42 46 db 851.0 ... 894.0mhz 39 44 db 1559.0 ... 1563.0mhz 40 47 db 1565.0 ... 1573.0mhz 41 48 db 1573.0 ... 1577.0mhz 45 51 db 1577.0 ... 1585.0mhz 42 51 db 1598.0 ... 1606.0mhz 38 45 db 1805.0 ... 1880.0mhz 20 47 db 1930.0 ... 1990.0mhz 42 48 db 2110.0 ... 2155.0mhz 42 46 db @f carrier 2112.4 ... 2152.6mhz a w-cdma 1) 42 47 db 2400.0 ... 2500.0mhz 32 38 db 3420.0 ... 3510.0mhz 20 27 db 4900.0 ... 5265.0mhz 18 28 db 5265.0 ... 5850.0mhz 14 25 db 4 june 4, 2013 b8517 1732.5 / 2132.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet characteristics for cdma 1x aws band temperature range for specification: t = C30 ?c to +90 ?c tx terminating impedance: z tx =50 w ant terminating impedance: z ant =50 w ll 2.4 nh rx teminating impedance: z rx =50 w ll 5.6 nh b8517 characteristics antenna-rx min. typ. @ 25 ?c max. center frequency f c 2132.5 mhz maximum insertion attenuation 2110.0 ... 2155.0mhz 1.9 2.3 @f carrier 2112.4 ... 2152.6mhz a w-cdma 1) 1) attenuation of w-cdma signal (power transfer function). please, refer to page 6. 1.8 2.2 db amplitude ripple (p-p) 2110.0 ... 2155.0mhz 0.4 0.9 @f carrier 2112.4 ... 2152.6mhz da w-cdma 1) 0.4 0.8 db error vector magnitude evm 2) 2) error vector magnitude (evm) based on definition given in 3gpp ts 25.141 @f carrier 2112.4 ... 2152.6mhz 0.5 2.0 % input vswr 2110.0 ... 2155.0mhz 1.4 1.8 output vswr 2110.0 ... 2155.0mhz 1.4 1.8 attenuation a 1.0 ... 1710.0mhz 40 51 db 400.0 ... 400.0mhz 50 70 db 1710.0 ... 1755.0mhz 45 51 db @f carrier 1712.4 ... 1752.6mhz a w-cdma 1) 45 51 db 1755.0 ... 2025.0mhz 15 40 db 1910.0 ... 1955.0mhz 35 45 db 2255.0 ... 6000.0mhz 30 39 db 2400.0 ... 2500.0mhz 40 50 db 2500.0 ... 3820.0mhz 35 42 db 3820.0 ... 3910.0mhz 35 42 db 4220.0 ... 4310.0mhz 34 41 db 5530.0 ... 5665.0mhz 32 40 db 5725.0 ... 5875.0mhz 32 40 db 5 june 4, 2013 b8517 1732.5 / 2132.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics for cdma 1x aws band temperature range for specification: t = C30 ?c to +90 ?c tx terminating impedance: z tx =50 w ant terminating impedance: z ant =50 w ll 2.4 nh rx teminating impedance: z rx =50 w ll 5.6 nh b8517 characteristics tx-rx min. typ. @ 25 ?c max. isolation a 1574.0 ... 1577.0 mhz 40 63 db 1710.0 ... 1755.0 mhz 52 56 db 1712.4 ... 1752.6 mhz a w-cdma 1) 1) attenuation of w-cdma signal (power transfer function). please, refer to page 6. 52 56 db 2110.0 ... 2155.0 mhz 50 61 db 2112.4 ... 2152.6 mhz a w-cdma 1) 50 62 db 3410.0 ... 3520.0 mhz 20 52 db 5120.0 ... 5275.0 mhz 20 48 db 6 june 4, 2013 b8517 1732.5 / 2132.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet annotation for characteristics section attenuation of w-cdma signal (power transfer function, a w-cdma ) is determined by with f carrier according to 3gpp ts 25.101 (e.g. for umts pass band, f carrier ranges from 1712.4 mhz (lowest tx channel) to 1752.6 mhz (highest tx channel)). here, h rrc (f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3gpp ts 25.101 with the following normalization: s s d21 f () h rrc ff carrier C () 2 f d C h rrc f () 2 f1 = d C 7 june 4, 2013 b8517 1732.5 / 2132.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. maximum ratings storage temperature range t stg C40/+90 ?c dc voltage v dc 5 1) 1) min. 168h damp heat steady state acc. to iec 60068-2-67 cy. v dc impedance to ground > 100 m w esd voltage v esd 50 2) 2) according to jesd22-a115a (machine model), 10 negative and 10 positive pulses. v machine model, 10 pulses input power at 1710.0 ... 1755.0 mhz p in 29 dbm continuous wave elsewhere p in 10 dbm 50 ?c, 5000h } 8 june 4, 2013 b8517 1732.5 / 2132.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet power transfer function tx-ant: power transfer function tx-ant (wideband): 9 june 4, 2013 b8517 1732.5 / 2132.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. power transfer function ant-rx: power transfer function ant-rx (wideband): 10 june 4, 2013 b8517 1732.5 / 2132.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet power transfer function tx-rx isolation: power transfer function tx-rx isolation (wideband): 11 june 4, 2013 b8517 1732.5 / 2132.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. vswrs at tx, rx and ant: 12 june 4, 2013 b8517 1732.5 / 2132.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet references type b8517 ordering code B39212B8517P810 marking and package c61157-a8-a76 packaging f61074-v8247-z000 date codes l_1126 s-parameters b8517_nb_un.s3p, b8517_wb_un.s3p see file header for pin/port assignments soldering profile s_6001 rohs compatible defined as compatible with the following documents: "directive 2002/95/ec of the european parliament and of the council of 27 january 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/ec from april 18th, 2005, amending directive 2002/95/ec of the european parliament and of the council for the purposes of establishing the maxi- mum concentration values for certain hazardous substances in electrical and electronic equipment." matching coils see inductor pdf-catalog http:// www .tdk.co.jp/tefe02/coil.htm#aname1 and data library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for a large variety of matching coils. for further information please contact your local epcos sales office or visit our webpage at w ww.epcos.com . published by epcos ag systems, acoustics, waves business group p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2013. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or t he international representatives. due to technical requirements components may contain dangerous substances. for information on t he type in question please also contact one of our sales offices. 13 june 4, 2013 important notes t he following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks. |
Price & Availability of B39212B8517P810 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |