crystal can welded dpdt d ry circuit to 5 amps contact arrangement .......................... 2pdt (2 form c) weight ................................................... ...... 1.3 oz approx. designed to meet the requirements of mil - prf - 39016. contact rating (note 1) resistive: br13 ......................................... 5 amps @ 28 vdc br13h ................. 3 amps @ 28 vdc or 2 amps @ 115 vac, 400 hz (case ungrounded) br13k ........................................ 2 amps @ 28 vdc 115 vac, 400 hz (case ungrounded) inductive ........................................... 1 amp @ 28 vdc low level ............................ 10 - 50 a @ 10 - 50 mv dc or peak ac (note 4) pull i n power: br13............................................... ...... 250 mw approx. br13h .................................................. 100 mw approx. br13k ................................................... . 40 mw approx. operate/release time: br13............................................... ................ 5 ms max br13h ................................................... ......... 6 ms max br13k ................................................... ....... 15 ms max excluding bounce time at nominal coil voltage contact bounce time: br13 and br13h ............. 2 ms max @ 2 and 3 amps @ 28 vdc br13k ........................... 2 ms max @ 2 amps 28 vdc contact resistance: before life ....................... 0.050 ohms @ rated current and 6 vdc after life .......................... 0.100 ohms @ rated current and 6 vdc temperature range ............................... - 65 o c to +125 o c vibration (note 2): br13............................................... 0.4" da 10 - 38 hz, 20 g' s 38 - 2,000 hz br13h and br13k ........................ 0.4" da 10 - 31 hz, 20 g's 31 - 2,000 hz shock (operating) (note 2) .......................... 50 g's 11 ms duty cycle ................................................... ..... continuous insulation resistance .. 10,000 megohms @ 500v 25 o c 1,000 megohms @ 500v 125 o c dielectric s trength: sea level: contact to case ................................... 1,000 vrms contact to coil ..................................... 1,000 vrms coil to case ......................................... 1,000 vrms across open contacts: br13 and br13h ................................ 750 vrms br13k .................................................. 500 vrms 70,000 feet all points .................................................. 350 vrms notes 1. for case grounded loads and o ther ratings, consult the factory. 2. for applications requiring other shock and vibratio n levels, consult the factory. 3. for other ratings consult the factory. 4. relay contacts which have switched high level curre nts are no longer suitable for switc hing low level loads. br13 crystal can welded ? dpdt dry circuit to 5 amps s pecifications general performance environmental electrical characteristics 1 www.microsemi.com ? 2015 microsemi corporation april 2015 rev. 4 downloaded from: http:///
relay type contact rating nominal coil resistance terminal style mounting type nominal coil voltage part number model br13 5 amps (250 mw) model br13h 3 amps (100 mw) model br13 k 2 amps ( 40 mw) br13 - 36()() - 6v br13h - 85()() - 6v br13k - 220()() - 6v br13 - 140()() - 12v br13h - 350()() - 12v br13k - 850()() - 12v br13 - 675()() - 26v br13h - 1.6k()() - 26v br13k - 4k()() - 26v br13 - 12k()() - 115v br13h - 28k()() - 115v br13k - 40k()() - 115v no minal coil voltage 6 vdc 12 vdc 26 vdc 115 vdc maximum coil voltage 7.3 vdc 14.8 vdc 32 vdc 127 vdc pull in voltage (max at +125 o c) 4.4 vdc 8.4 vdc 18 vdc 79 vdc pull in voltage (max) 3 vdc 6 vdc 13 vdc 57.5 vdc drop out voltage (min) 0.3 vdc 0.6 vdc 1.3 vdc 5.7 vdc br13 36 ohms 140 ohms 675 ohms 12k ohms br13h 85 ohms 350 ohms 1600 ohms 28k ohms coil resistance 10% at 25 o c br13k 220 ohms 850 ohms 4000 ohms 40k ohms (max.) br13 h - 1.6k a 1 - 26v unless otherwise specified, all tests made at nomin al coil voltages, @ 25 o c. for special coil variations, switching configuratio ns, terminals styles and mounting types, consult the facto ry. unless otherwise specified, tolerances on decimal dimensions are .010". specifications contained herein are subject to chan ge without notice. coil data schematicterminal view terminal styles mounting codes general notes 2 downloaded from: http:///
br13 - 0 4 / 0 4 .15 microsemi corporate headquarters one enterprise, aliso viejo, ca 92656 usa within the usa : +1 (800) 713-4113 outside the usa : +1 (949) 380-6100 sales : +1 (949) 380-6136 fax : +1 (949) 215-4996 e-mail: sales.support@microsemi.com microsemi corporation (nasdaq: mscc) offers a comprehensive portfolio of semiconductor and system solutions for comm unications, defense & securi ty, aerospace and industrial markets. products include high-performance and radiation-hardened analog mixed-signal integrated circuits, fpgas, socs and asi cs; power management products; timing and synchronization devices and precise time soluti ons, setting the worlds standard for time; voice processing devices; rf solutions; discrete components; security technologies and scalable anti-tamper products; power-over-ethernet ic s and midspans; as well as custom design capabilities and services. microsemi is head quartered in aliso viejo, calif., and has approximately 3,400 employees globally. learn more at www.microsemi.com . ? 201 5 microsemi corporation. all rights reserved. microsemi and the microsemi logo are trademarks of microsemi corporation. all other trademarks and service marks are the property of their respective owners. microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose, nor does microsemi assume any liability whatsoever arising out of the application or use of any product or circuit. the products sold hereunder and any other products sold by microsem i have been subject to li mited testing and should not be used in conjunction with missi on-critical equipment or applications. any performance specifications are believed to be reliable but are not verified, and buyer must conduct and complete all performance and other testing of the products, alone and together with, or installed in, any end-products. buyer shall not rely on any data and performance specifications or para meters provided by micr osemi. it is the buyer's responsibility to independently determine suitability of any products and to test and verify the same. the information provided by microsemi hereunder is provi ded "as is, where is" and with all faults, and the entire risk associated with such information is entirely with the buyer. microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other ip rights, whether with regard to such information itself or anything described by such in formation. information provided in this document is proprietary to microsemi, and microsemi reserves the ri ght to make any changes to the information in this document or to any products and services at any time without notice. downloaded from: http:///
|
