specifications and information are subject to change without notice wj communications, inc ? phone 1-800-wj1-4401 ? fax: 408-577-6621 ? e-mail: sales@wj.com ? web site: www.wj.com june 2003 the communications edge tm AG302-63 ingap hbt gain block product information product features ? dc ? 4000 mhz ? +13.5 dbm p1db at 900 mhz ? +26.5 dbm oip3 at 900 mhz ? 15.5 db gain at 900 mhz ? single voltage supply ? sot-363 smt package ? internally matched to 50 ? applications ? mobile infrastructure ? catv / dbs ? w-lan / ism ? rfid ? defense / homeland security ? fixed wireless product description the AG302-63 is a general-purpose buffer amplifier that offers high dynamic range in a low-cost surface-m ount package. at 900 mhz, the AG302-63 typically provides 15.5 db of gain, +26.5 dbm output ip3, and +13.5 dbm p1db. the device combines dependable performance with consistent quality to maintain mttf values exceeding 100 years at mounting temperatures of +85 c and is housed in a sot-363 industry-standard smt package. the AG302-63 consists of darlington pair amplifiers using the high reliability ingap/gaas hbt technology process technology and only requires dc-blocking capacitors, a bias resistor, and an inductive rf choke for operation. the broadband mmic amplifier can be directly applied to various current and next generation wireless technologies such as gprs, gsm, cdma, and w-cdma. in addition, the AG302-63 will work for other various applications within the dc to 4 ghz frequency range such as catv and fixed wireless. functional diagram rf in gnd rf out gnd gnd gnd 1 2 3 4 6 5 function pin no. input 3 output/bias 6 ground 1, 2, 4, 5 specifications parameter units min typ max frequency range mhz dc 900 4000 gain (900 mhz) db 15.6 gain (1900 mhz) db 13.5 14.5 15.5 input return loss db 18 output return loss db 18 output p1db dbm +13.4 output ip3 (2) dbm +26.4 output ip2 dbm +37 noise figure db 3.4 device voltage v 4.23 device current ma 35 thermal resistance c / w 325 junction temperature (3) c 177 test conditions unless otherwise noted. 1. t = 25o c, supply voltage = +5 v, r bias = 22.1 ? , frequency = 900 mhz, 50 ? system. 2. 3oip measured with two tones at an output power of -2 dbm/tone separated by 10 mhz. the suppression on the largest im3 product is used to calculate the 3oip using a 2:1 rule. 3. the junction temperature ensures a minimum mttf rating of 1 million hours of usage. typical performance parameter units typical frequency mhz 500 900 1900 2140 s21 db 15.9 15.6 14.5 14.2 s11 db -18 -18 -18 -18 s22 db -20 -18 -18 -15 output p1db dbm +13.2 +13.4 +12.2 +11.7 output ip3 dbm +26.6 +26.4 +24.8 +24.3 noise figure db 3.3 3.4 3.6 3.6 test conditions: t = 25o c, supply voltage = +5 v, r bias = 22.1 ? , 50 ? system. absolute maximum rating ordering information parameter rating part no. description operating case temperature -40 to +85 c AG302-63 ingap hbt gain block storage temperature -55 to +125 c AG302-63pcb 700 ? 2400 mhz fully assembled eval. board dc voltage +5 v rf input power (continuous) +10 dbm junction temperature +250 c operation of this device above any of these parameters may cause permanent damage.
specifications and information are subject to change without notice wj communications, inc ? phone 1-800-wj1-4401 ? fax: 408-577-6621 ? e-mail: sales@wj.com ? web site: www.wj.com june 2003 the communications edge tm AG302-63 ingap hbt gain block product information typical device rf performance supply bias = +5 v, r bias = 22.1 ? ? ? ? , i cc = 35 ma frequency mhz 100 500 900 1900 2140 2400 3500 5800 s21 db 16.0 15.9 15.6 14.5 14.2 13.9 12.5 9.2 s11 db -18 -18 -18 -18 -18 -18 -15 -11 s22 db -20 -20 -18 -18 -15 -15 -14 -8 output p1db dbm +13.5 +13.2 +13.4 +12.2 +11.7 +11.6 +9.5 output ip3 dbm +26.6 +26.6 +26.4 +24.8 +24.3 +23.9 noise figure db 3.3 3.3 3.4 3.6 3.6 3.7 1. test conditions: t = 25o c, supply voltage = +5 v, device voltage = 4.23 v, rbias = 22.1 ? , icc = 35 ma typical, 50 ? system. 2. 3oip measured with two tones at an output power of -2 dbm/tone separated by 10 mhz. the suppression on the largest im3 prod uct is used to calculate the 3oip using a 2:1 rule. 3. data is shown as device performance only. actual implementation for the desired frequency band will be determined by exter nal components shown in the application circuit. gain vs. frequency 6 8 10 12 14 16 01234 frequency (ghz) gain (db) -40 c +25 c +85 c return loss -40 -30 -20 -10 0 0123456 frequency (ghz) s11, s22 (db) s11 s22 i-v curve 0 10 20 30 40 50 60 3.0 3.5 4.0 4.5 device voltage (v) device current (ma) optimal operating point output ip3 vs. frequency 10 15 20 25 30 00.511.522.53 frequency (ghz) oip3 (dbm) -40 c +25 c +85 c output ip2 vs. frequency 20 25 30 35 40 0 200 400 600 800 1000 frequency (mhz) oip2 (dbm) -40c +25c +85c noise figure vs. frequency 0 1 2 3 4 5 0 0.5 1 1.5 2 2.5 3 frequency (ghz) nf ( db ) -40 c +25 c +85 c p1db vs. frequency 0 5 10 15 20 00.511.522.533.54 frequency (ghz) p1db (dbm) -40 c +25 c +85 c output power / gain vs. input power frequency = 900 mhz 6 8 10 12 14 16 -20 -16 -12 -8 -4 0 4 input power (dbm) gain (db) -4 0 4 8 12 16 out p ut power ( dbm ) output power gain output power / gain vs. input power frequency = 2000 mhz 4 6 8 10 12 14 -20 -16 -12 -8 -4 0 4 input power (dbm) gain (db) -4 0 4 8 12 16 out p ut power ( dbm ) output power gain
specifications and information are subject to change without notice wj communications, inc ? phone 1-800-wj1-4401 ? fax: 408-577-6621 ? e-mail: sales@wj.com ? web site: www.wj.com june 2003 the communications edge tm AG302-63 ingap hbt gain block product information typical device rf performance (cont?d) supply bias = +6 v, r bias = 51 ? ? ? ? , i cc = 35 ma gain vs. frequency 6 8 10 12 14 16 01234 frequency (ghz) gain (db) -40 c +25 c +85 c output ip3 vs. frequency 10 15 20 25 30 0 0.5 1 1.5 2 2.5 3 frequency (ghz) oip3 (dbm) -40 c +25 c +85 c output ip2 vs. frequency 20 25 30 35 40 0 200 400 600 800 1000 frequency (mhz) oip2 (dbm) -40c +25c +85c p1db vs. frequency 0 5 10 15 20 00.511.522.533.54 frequency (ghz) p1db (dbm) -40 c +25 c +85 c noise figure vs. frequency 0 1 2 3 4 5 0 0.5 1 1.5 2 2.5 3 frequency (ghz) nf ( db ) -40 c +25 c +85 c typical device rf performance supply bias = +8 v, r bias = 108 ? ? ? ? , i cc = 35 ma gain vs. frequency 6 8 10 12 14 16 01234 frequency (ghz) gain (db) -40 c +25 c +85 c output ip3 vs. frequency 10 15 20 25 30 0 0.5 1 1.5 2 2.5 3 frequency (ghz) oip3 (dbm) -40 c +25 c +85 c output ip2 vs. frequency 20 25 30 35 40 0 200 400 600 800 1000 frequency (mhz) oip2 (dbm) -40c +25c +85c p1db vs. frequency 0 5 10 15 20 00.511.522.533.54 frequency (ghz) p1db (dbm) -40 c +25 c +85 c noise figure vs. frequency 0 1 2 3 4 5 0 0.5 1 1.5 2 2.5 3 frequency (ghz) nf ( db ) -40 c +25 c +85 c
specifications and information are subject to change without notice wj communications, inc ? phone 1-800-wj1-4401 ? fax: 408-577-6621 ? e-mail: sales@wj.com ? web site: www.wj.com june 2003 the communications edge tm AG302-63 ingap hbt gain block product information application circuit recommended component values reference frequency (mhz) designator 50 500 900 1900 2200 2500 3500 l1 820 nh 220 nh 68 nh 27 nh 22 nh 18 nh 15 nh c1, c2, c4 .018 f 1000 pf 100 pf 68 pf 68 pf 56 pf 39 pf 1. the proper values for the components are dependent upon the intended frequency of operation. 2. the following values are contained on the evaluation board to achieve optimal broadband performance: ref. desig. value / type size l1 39 nh wirewound inductor 0603 c1, c2 56 pf chip capacitor 0603 c3 0.018 f chip capacitor 0603 c4 do not place r1 22.1 ? 1% tolerance 0805 recommended bias resistor values supply voltage r1 value size 5 v 22.1 ohms 0603 6 v 51 ohms 0805 7 v 80 ohms 1206 8 v 108 ohms 1210 9 v 137 ohms 1210 10 v 166 ohms 1210 12 v 223 ohms 2010 the proper value for r1 is dependent upon the supply voltage and allows for bias stability over temperature. wj recommends a minimum supply bias of +5 v. a 1% tolerance resistor is recommended. c1 blocking capacitor rf out l1 rf choke c3 0.018 f r1 bias resistor rf in c4 bypass capacitor c2 blocking ca p acito r vcc icc = 35 ma AG302-63
specifications and information are subject to change without notice wj communications, inc ? phone 1-800-wj1-4401 ? fax: 408-577-6621 ? e-mail: sales@wj.com ? web site: www.wj.com june 2003 the communications edge tm AG302-63 ingap hbt gain block product information outline drawing land pattern product marking the component will be marked with a ?d? designator followed by a two-digit numeric lot code on the top surface of the package. tape and reel specifications for this part are located on the website in the ?application notes? section. msl / esd rating esd rating: class 0 value: passes at 150 v test: human body model (hbm) standard: jedec standard jesd22-a114 esd rating: class ii value: passes at 250 v test: charged device model (cdm) standard: jedec standard jesd22-c101 msl rating: level 1 standard: jedec standard j-std-020a mounting config. notes
specifications and information are subject to change without notice wj communications, inc ? phone 1-800-wj1-4401 ? fax: 408-577-6621 ? e-mail: sales@wj.com ? web site: www.wj.com june 2003 the communications edge tm AG302-63 ingap hbt gain block product information typical device data s-parameters (v device = +4.23 v, i cc = 35 ma, t = 25 c, calibrated to device leads) freq (mhz) s11 (db) s11 (ang) s21 (db) s21 (ang) s12 (db) s12 (ang) s22 (db) s22 (ang) 50 -19.85 -177.05 15.79 177.89 -19.50 1.85 -22.57 -9.39 200 -20.39 172.44 15.71 172.31 -19.99 -0.03 -22.73 -15.90 400 -18.95 168.66 15.66 164.59 -20.17 0.39 -26.74 -50.08 600 -18.22 166.03 15.54 157.08 -19.88 -0.66 -25.19 -64.22 800 -18.39 160.37 15.44 149.77 -19.76 -1.68 -23.62 -86.11 1000 -18.40 155.28 15.23 142.64 -20.03 -5.40 -21.92 -97.33 1200 -18.39 153.16 15.05 135.22 -19.57 -2.69 -20.59 -111.56 1400 -18.59 149.91 14.87 128.43 -19.71 -3.14 -19.34 -118.43 1600 -18.76 150.09 14.61 121.52 -19.56 -3.55 -18.56 -127.47 1800 -19.47 149.34 14.35 114.94 -19.44 -3.76 -17.84 -135.63 2000 -19.53 143.58 14.09 108.45 -19.21 -4.88 -17.12 -142.08 2200 -20.36 111.55 13.83 102.12 -19.15 -3.98 -15.06 -128.29 2400 -20.74 117.89 13.58 96.07 -19.14 -6.05 -15.16 -138.31 2600 -20.03 119.10 13.43 91.90 -18.92 -9.37 -15.52 -146.95 2800 -19.88 127.04 13.14 85.95 -18.60 -8.35 -15.88 -158.46 3000 -19.28 129.86 12.90 79.66 -18.52 -7.78 -15.96 -175.61 3200 -17.86 131.98 12.60 74.00 -18.45 -9.35 -15.78 166.25 3400 -16.58 129.28 12.34 67.83 -18.48 -11.44 -14.80 151.04 3600 -15.33 126.05 12.03 61.86 -18.29 -15.20 -13.50 136.07 3800 -13.90 121.94 11.68 55.97 -18.27 -16.93 -12.16 125.22 4000 -12.67 119.37 11.34 49.91 -17.95 -17.17 -10.93 117.72 4200 -11.64 116.98 10.95 44.40 -17.80 -20.20 -9.79 110.52 4400 -10.94 113.30 10.58 39.19 -17.80 -21.20 -8.74 106.30 4600 -10.36 111.01 10.22 33.87 -17.65 -23.53 -8.11 103.95 4800 -10.13 108.79 9.92 29.20 -17.91 -25.48 -7.74 102.49 5000 -9.85 106.48 9.64 24.37 -17.45 -26.81 -7.45 102.33 5200 -10.16 105.84 9.40 20.36 -17.29 -29.16 -7.47 101.81 5400 -10.47 105.02 9.13 16.57 -16.96 -29.91 -7.69 102.58 5600 -10.90 104.58 9.03 12.70 -16.90 -30.12 -7.92 103.26 5800 -11.57 106.08 8.88 8.94 -16.81 -33.04 -8.35 104.47 6000 -12.41 105.88 8.77 4.74 -16.46 -33.40 -9.03 103.86 device s-parameters are available for download off of the website at: http://www.wj.com
|
