page 1 of 5 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com the big deal ? excellent gain fatness, 0.5 db ? dual matched amplifer for push-pull & balanced amplifers ? high dynamic range, high oip3 & low nf product overview MPGA-105+ is a dual matched wideband amplifer fabricated using advanced e-phemt technology, offering high dynamic range (high ip3 and low nf) for use in 50 and 75 ohm applications. this model has demonstrated exceptionally high ip2 in wideband 50 and 75 ohm amplifer evaluation boards. combining this performance with low noise fgure makes it suitable for use in very high dynamic range amplifers. key features MPGA-105+ 50 ? 0.04 to 3 ghz feature advantages broadband covers many communication bands including cellular, cable tv, pcs, satcom, wimax, and more. excellent gain flatness: 0.5 db over 0.1-2 ghz requires no gain compensation in most wideband applications. matched pair for use in high ip3 and ip2 amplifers typical gain match of 0.2 db and phase match of 0.7, enables it to be used in push-pull amplifers. outstanding ip2. high ip3, up to 40 dbm ideal for suppressing unwanted intermods in the presence of multiple carriers, now common in many communication systems. high p1db, up to 21 dbm high p1db enables the amplifer to operate in linear region in the presence of strong interfer - ing signals. low noise figure: 1.7-1.9 db typical together with high oip3/p1db, results in high dynamic range case style: dl1020 surface mount dual matched mmic amplifer
page 2 of 5 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com product features ? two matched amplifers in one package ? high ip3, +37.5 dbm at 0.9 ghz ? high ip2, +59 dbm at 0.9 ghz in push-pull confguration ? gain, 14.4 db typ. at 0.9 ghz ? excellent gain flatness, 0.5 db (0.1-2 ghz) ? p1db, +21 dbm typ. at 0.9 ghz ? low noise fgure, 1.9 db typ. at 0.9 ghz typical applications ? satcom ? catv ? ftth ? optical networks ? base station infrastructure ? balanced amplifers ? 75 ohm push-pull and balanced amplifers rev. a m151107 MPGA-105+ mcl ny 150928 0.04-3ghz case style: dl1020 MPGA-105+ general description MPGA-105+ (rohs compliant) is an advanced ultra-fat gain amplifer fabricated using e-phemt technol - ogy and offers extremely high dynamic range over a broad frequency range and with low noise fgure. in addition, the MPGA-105+ has good input and output return loss over a broad frequency range without the need for external matching components. lead fnish is snagni and is enclosed in a 4.9 x 6 mm mclp pack - age for good thermal performance. simplifed schematic (each of a1, a2) and pad description function pad number description rf in, a1 1 rf input pin. this pin requires the use of an external dc blocking capacitor chosen for the frequency of operation. (see application circuit, fig 2.) rf-out and dc-in, a1 8 rf output and bias pin. dc voltage is present on this pin; therefore a dc blocking capacitor is neces - sary for proper operation. an rf choke is needed to feed dc bias without loss of rf signal due to the bias connection, as shown in recommended application circuit, fig 2 rf in, a2 4 rf input pin. this pin requires the use of an external dc blocking capacitor chosen for the frequency of operation. (see application circuit, fig 2.) rf-out and dc-in, a2 5 rf output and bias pin. dc voltage is present on this pin; therefore a dc blocking capacitor is neces - sary for proper operation. an rf choke is needed to feed dc bias without loss of rf signal due to the bias connection, as shown in recommended application circuit, fig 2 gnd 2,3,6,7 & paddle connections to ground. use via holes as shown in suggested layout for pcb design to reduce ground path inductance for best performance. * enhancement mode pseudomorphic high electron mobility transistor. rf in rf in rf out and dc in rf out and dc in a1 a2 rf in 1 a2 a1 gnd 2 gnd 7 gnd 3 gnd 6 rf in 4 rf out & dc in 5 rf out & dc in 8 surface mount dual matched mmic amplifer +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
page 3 of 5 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com electrical specifcations 1 at 25c, zo=50 ? and device voltage 5v, unless noted (specifcations other than matching or where defned as push-pull are for each of the two matched amplifers in the package) parameter condition (ghz) min. typ. max. units frequency range 0.04 3.0 ghz gain 0.04 16.0 db 0.5 14.6 0.9 13.0 14.4 15.9 2.0 14.1 2.6 14.3 3.0 14.0 gain flatness 0.1-2.0 0.5 db input return loss 0.04 11.3 db 0.5 24.3 0.9 15.0 20.6 2.0 19.0 2.6 11.6 3.0 10.5 output return loss 0.04 12.6 db 0.5 20.5 0.9 15.1 2.0 8.2 2.6 7.4 3.0 7.9 output power @1 db compression (2,6) 0.04 21.0 dbm 0.5 20.5 0.9 21.0 2.0 19.8 2.6 19.8 3.0 20.1 output ip3 (6) 0.04 35.9 dbm 0.5 37.6 0.9 35.5 37.8 2.0 34.1 2.6 32.5 3.0 32.1 noise figure 0.04 1.7 db 0.5 1.9 0.9 1.9 2.0 1.8 2.6 1.7 3.0 1.8 matching between a1, a2 amplitude unbalance 0.04 0.0 db 0.5 0.1 0.9 0.1 2.0 0.2 2.6 0.3 3.0 0.2 phase unbalance 0.04 0.7 deg. 0.5 0.4 0.9 0.8 2.0 1.6 2.6 1.4 3.0 0.8 device operating voltage 4.8 5.0 5.2 v device operating current (each amplifer) 63 77 ma device current variation vs. temperature 80 a/c device current variation vs voltage 0.014 ma/mv thermal resistance, junction-to-ground lead (7) 47 c/w MPGA-105+ push-pull amplifer typical performance (3) frequency (ghz) gain (db) output ip3 (dbm) output ip2 (dbm) 0.04 12.2 34.4 66.6 0.5 12.3 35.8 58.7 0.9 11.4 43.3 59.4 2.0 10.4 35.1 55.3 2.6 8.7 35.0 66.9 3.0 8.1 34.9 67.8 (1) measured on mini-circuits test board tb-561-105+, see characterization circuit, fig 1. (2) current increases at p1db (3) measured on evaluation boards (push-pull amplifers) tb-666-50-105+. see characterization test circuit (fig 1b) (4) permanent damage may occur if any of these limits are exceeded. (5) defned with reference to ground pad temperature. (6) per single ended amplifer. (7) jc= (junction temperature - 85c) / (voltage x sum of current in a1 & a2) absolute maximum ratings (4) parameter ratings operating temperature -40c to 85c storage temperature -65c to 150c operating current at 5v (6) 94 ma power dissipation (6) 0.47 w input power (cw) (6) 23 dbm (5 minutes max, 17 dbm (continuous) dc voltage (pads 5, 8) 5.5v dual matched mmic amplifer
page 4 of 5 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com fig 1a . block diagram of test circuit used for characterization. (dut tested in mini-circuits test board tb-561-105+, except for ip2). gain, return loss, output power at 1db compression (p1 db) , output ip3 (oip3) and noise fgure measured using agilents n5242a pna-x micro - wave network analyzer. conditions: 1. gain and return loss: pin= -25dbm 2. output ip3 (oip3): two tones, spaced 1mhz apart, 0 dbm/tone at output. characterization test circuit MPGA-105+ fig 1b . block diagram of test set up used for characterization of gain, ip2, ip3 of push-pull amplifer. measured using agilents signal generators e8527d and spectrum analyzer n9020a. conditions: 1. gain and return loss: pin= -25dbm 2. output ip3 & ip2: two tones, spaced 1mhz apart, 8 dbm/tone at output. ip2 is measured at the sum frequency of the tones. mini-circuits evaluation boards, 50 ? push-pull amplifers tb-666-50-105+ (MPGA-105+ inside) product marking mcl MPGA-105+ index over pad 1 recommended application circuit fig 2. recommended application circuit. mini-circuits evaluation board 50 ? : tb-666-50-105+ dual matched mmic amplifer
page 5 of 5 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com MPGA-105+ esd rating msl test flow chart human body model (hbm): class 1a (250 to <500v) in accordance with ansi/esd stm 5.1 - 2001 machine model (mm): class m1 (pass 25v) in accordance with ansi/esd stm5.2-1999 msl rating moisture sensitivity: msl1 in accordance with ipc/jedec j-std-020d performance data data table swept graphs s-parameter (s4p files) data set (.zip fle) case style dl1020 plastic package, exposed paddle lead fnish: tin-silver over nickel tape & reel f68 standard quantities available on reel 7 reels with 20, 50, 100, 200, 500 or 1k devices suggested layout for pcb design pl-322 evaluation board tb-666-50-105+ environmental ratings env08t2 additional notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp visual inspection electrical test sam analysis refow 3 cycles, 260c soak 85c/85rh 168 hours bake at 125c, 24 hours visual inspection electrical test sam analysis start finish additional detailed technical information additional information is available on our dash board. to access this information click here dual matched mmic amplifer
|
