typical performance data maximum ratings coaxial connections sum port s port 1,2,3,4,5,6 1,2,3,4,5,6 operating temperature -55c to 100c storage temperature -55c to 100c power input (as a splitter) 10w max. internal dissipation 1.5w max. dc current 0.6a(100ma for each port) outline drawing outline dimensions ( ) inch mm ZN6PD-63W+ 6 way-0 50 ? 1800 to 6000 mhz power splitter/combiner rev. b m151107 ZN6PD-63W+ ed-14597/2 jc/td/cp/am 151019 dc pass abcde f 3.50 3.00 .63 .125 3.375 1.50 88.90 76.20 16.00 3.18 85.73 38.10 gh j k wt .125 1.75 .32 .500 grams 3.18 44.45 8.13 12.70 180 case style: uu586 connectors model sma ZN6PD-63W-s+ features ? wideband, 1800 to 6000 mhz ? low insertion loss, 1.0 db typ. ? good isolation, 20 db typ. ? rugged, shielded case ? up to 10w power input as splitter applications ? high band pcs ? unii ? wimax ? wifi ? bluetooth ZN6PD-63W+ total loss 8.0 8.2 8.4 8.6 8.8 9.0 9.2 9.4 9.6 1800 2500 3200 3900 4600 5300 6000 frequency (mhz) total loss (db) s-1 s-3 s-5 ZN6PD-63W+ isolation 15 25 35 45 55 1800 2500 3200 3900 4600 5300 6000 frequency (mhz) isolation (db) 1-2 1-3 1-6 ZN6PD-63W+ vswr 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1800 2500 3200 3900 4600 5300 6000 frequency (mhz) vswr vswr s vswr 1 vswr 3 frequency (mhz) total loss 1 (db) amplitude unbalance (db) isolation (db) phase unbal. (deg.) vswr s vswr 1 vswr 3 s-1 s-3 s-5 1-2 1-3 1-6 electrical schematic permanent damage may occur if any of these limits are exceeded. 1. total loss = insertion loss + 7.8db theoretical splitter loss. electrical specifcations at 25c parameter frequency (mhz) min. typ. max. unit frequency range 1800 6000 mhz insertion loss (above theoretical 7.8 db) 1800 - 3000 0.80 1.3 db 3000 - 6000 1.5 2.1 isolation 1800 - 6000 15 20 db phase unbalance 1800 - 3000 5 9 degree 3000 - 6000 9 15 amplitude unbalance 1800 - 3000 0.15 0.5 db 3000 - 6000 0.8 1.5 vswr (port s) 1800 - 6000 1.3 :1 vswr (port 1-6) 1800 - 6000 1.3 :1 1800.00 8.28 8.29 8.23 0.09 22.61 44.15 23.72 2.63 1.21 1.16 1.11 2000.00 8.30 8.30 8.27 0.06 24.72 33.07 24.64 3.54 1.22 1.12 1.12 2200.00 8.45 8.37 8.41 0.09 24.21 29.83 25.53 4.08 1.41 1.11 1.12 2400.00 8.47 8.35 8.42 0.13 24.07 28.74 26.37 4.12 1.35 1.14 1.04 2600.00 8.50 8.42 8.48 0.11 26.71 29.12 27.24 4.26 1.34 1.18 1.09 2800.00 8.66 8.62 8.62 0.14 31.14 30.66 28.17 4.71 1.41 1.17 1.17 3000.00 8.67 8.59 8.61 0.14 23.42 33.06 29.14 5.27 1.31 1.11 1.17 3200.00 8.65 8.47 8.56 0.20 19.25 36.71 30.60 5.57 1.12 1.12 1.12 3400.00 8.73 8.45 8.63 0.31 18.12 39.00 32.33 5.40 1.28 1.19 1.10 4000.00 8.90 8.70 8.78 0.24 27.80 32.12 34.35 4.26 1.14 1.06 1.20 4200.00 8.88 8.78 8.76 0.17 28.59 31.71 34.59 5.46 1.30 1.17 1.27 4400.00 8.94 8.69 8.77 0.28 28.53 32.20 34.69 6.92 1.30 1.21 1.26 5000.00 9.21 8.40 8.95 0.84 18.33 33.54 35.39 6.74 1.20 1.32 1.10 5500.00 9.33 8.58 9.10 0.79 22.11 28.02 39.03 5.81 1.34 1.36 1.27 6000.00 9.36 8.70 9.21 0.73 18.45 25.19 44.05 7.06 1.20 1.22 1.27 ht-series tight spot sma wrench from $24.95 (dc through) port s rf+dc port 1 rf+dc port 2 rf+dc port n rf+dc notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
|
