page 1 of 4 dc/dc converters ten 60win series, 60 watt features 2 x 1 metal package wide 4:1 input voltage range 9C36, 18C75 vdc high effciency up to 92% adjustable output voltage no minimum load required operating temperature range C40c to +85c input flter to meet en 55032, class a remote on/off under voltage lockout lead free design, rohs compliant 3-year product warranty the ten 60win series is a family of high performance 60 watt dc/dc converter modules featuring ultra wide 4:1 input voltage ranges in a six side shielded 2 x 1 metal package with industry standard footprint. standard features include remote on/off, over voltage protection, under voltage lockout and short circuit protection. high effciency across load range and low input current characteristics at no load make these converters the ideal solution for battery-operated systems. typical ap - plications are in wireless networks, telecom/datacom, industry control systems and measurement equipment. order code input voltage range output voltage output current max. effciency typ. ten 60-2411win 5.0 vdc 12000 ma 92 % ten 60-2412win 12 vdc 5000 ma 92 % ten 60-2413win 15 vdc 4000 ma 92 % ten 60-2415win 9 C 36 vdc 24 vdc 2500 ma 92 % ten 60-2422win (24 vdc nominal) 12 vdc 2500 ma 91 % ten 60-2423win 15 vdc 2000 ma 91 % ten 60-2425win 24 vdc 1250 ma 91 % ten 60-4811win 5.0 vdc 12000 ma 92 % ten 60-4812win 12 vdc 5000 ma 92 % ten 60-4813win 18 C 75 vdc 15 vdc 4000 ma 92 % ten 60-4815win (48 vdc nominal) 24 vdc 2500 ma 91 % ten 60-4822win 12 vdc 2500 ma 91 % ten 60-4823win 15 vdc 2000 ma 91 % ten 60-4825win 24 vdc 1250 ma 91 % models cb scheme ul 60 95 0- 1u l 60 95 0- 1 http://www.tracopower.com
page 2 of 4 dc/dc converters ten 60win series 60 watt input specifications input current (no load) 10 ma typ. start-up voltage 24 vin models: < 9.0 vdc 48 vin models: < 18 vdc under voltage shut down (lock-out circuit) 24 vin models: 8.0 vdc typ. 48 vin models: 16 vdc typ. surge voltage (1 sec.) 24 vin models: 50 v max. 48 vin models: 100 v max. conducted noise en 55032 class a with external components filter proposal to be adviced esd (electrostatic discharge) en 61000-4-2, air 8 kv, contact 6 kv, perf. criteria a radiated immunity en 61000-4-3, 20 v/m, perf. criteria a fast transient / surge (with external input capacitor) en 61000-4-4, 2 kv, perf. criteria a en 61000-4-5, 2 kv perf. criteria a C external input capacitor 24 vin models: nippon chemi-con ky 220 f, 100 v, esr 48 mohm and tvs 58v, 3000w peak (smdj58a) in parallel 48 vin models: nippon chemi-con ky 220 f, 100 v, esr 48 mohm and tvs 120v, 3000w peak (smdj120a) in parallel conducted immunity en 61000-4-6, 10 vrms, perf. criteria a output specifications voltage set accuracy 1 % voltage adjustment range (single output models only) 15 & 24 vdc models: +20%, -10% other models: 10 % regulation C input variation vin min. to vin max. 0.2 % max. C load variation 0 C 100 % single output models: 0.5 % max. dual output models: 1 % max. C load cross variation 25 % / 100 % 5 % max . minimum load not required temperature coefficient 0.02 %/k ripple and noise (20 mhz bandwidth) 5.0 vdc: 100 mvp-p max. with 10f/25v x7r mlcc 12 & 15 vdc: 125 mvp-p max. with 10f/25v x7r mlcc 24 vdc: 200 mvp-p max. with 4.7f/50v x7r mlcc start up time C power on 60 ms typ. (constant resistive load) C remote on 60 ms typ. transient response (25% load step change) 250 s typ. short circuit protection continuous, automatic recovery over load protection 150 % of iout max. typ. hiccup over-voltage protection (zener diode, single output models only) 5 vdc models: 6.2 v 12 vdc models: 15 v 15 vdc models: 20 v 24 vdc models: 30 v capacitive load (max. values) 5.0 vdc models: 30000 f 12 vdc models: 5850 f 15 vdc models: 3900 f 24 vdc models: 2000 f 12 vdc models: 3900 f (each output) 15 vdc models: 2400 f (each output) 24 vdc models: 1000 f (each output) http://www.tracopower.com all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated.
page 3 of 4 dc/dc converters ten 60win series 60 watt general specifications temperature ranges C operating C40c to +85c (with derating) C casing temperature +105c max. C storage C55c to +125c power derating C natural convection 2.5 %/k above +50c C natural convection with heat sink (optional) 2.25 %/k above +55c thermal impedance C natural convection 10.8 k/w C natural convection with heat sink (optional) 10.3 k/w over-temperatur protection at 115c humidity (non condensing) 5 C 95 % rel. h isolation voltage (60 sec.) C input / output 1500 vdc isolation resistance C input / output >1 gohm isolation capacitance C input / output 2200 pf max. switching frequency 250 khz typ. (pulse width modulation pwm) thermal shock, mechanical shock & vibration mil-std-810f safety standards ul/cul 60950-1, iec/en 60950-1 C certification documents www.tracopower.com/overview/ten60win remote on/off C on: 3.0 ... 12 vdc or open circuit C off: 0 ... 1.2 vdc or short circuit pin 3 and pin 2 C off idle current: 3.0 ma typ. C input current fo remote pin -0.5 to 0.5 ma reliability, calculated mtbf (mil-hdbk-217f, at +70c, ground benign) 850000 h environmental compliance C reach www.tracopower.com/info/reach-declaration.pdf C rohs rohs directive 2011/65/eu supporting documents: www.tracopower.com/overview/ten60win output voltage adjustment (for single output models only) rd trim +vout ru trim - vout trim up trim down nominal output voltage at open trim input ru, rd for adjustment http://www.tracopower.com all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated.
page 4 of 4 sp ec i?cati ons can be changed wi thout noti ce! make sure you are using the latest documentation, downloadable at www.tracopower. com www .tracopower. com physical specifications casing material copper baseplate material non conductive fr4 potting material silicone (ul94v-0 rated) weight 33 g (1.16 o z ) soldering temperature max. +265c / 10 sec. dc/dc converters ten 60win series 60 watt outline dimensions rev. july 11, 2018 56.0 (2.2) max. 14.5 (0.57) 16.8 (0.66) max. conver ter heat-sink thermal pad clamp note: before attaching the heatsink, the product label on converter has to be removed for optimal performance. for volume orders we can supply the converters with heatsink already mounted. please contact us for a relative quotation. order code: ten-hs1 (cont.: heat-sink, thermal pad, 2 clamps) material: aluminum finish: anodic treatment (black) weight: 17 g (0.60oz) without converter thermal impedance after assembling: 10.3 k/w pin single dual 1 +vin (vcc) +vin (vcc) 2 Cvin (gnd) Cvin (gnd) 3 remote on/off 4 +vout +vout 5 Cvout common 6 trim Cvout pin-out dimensions in [mm], () = inch pin diameter: 1.0 0.1 (0.04 0.004) pin pitch tolerances: 0.25 ( 0.01) case tolerances: 0.5 (0.02) 10.2 5.6 50.8 (2.0) (0.4) (0.22) bottom view 1 4 3 2 6 45.72 5 (1.8) 2.54 (0.1) 5.08 (0.2) 10.16 (0.4) 10.16 (0.4) 20.32 (0.8) 25.4 (1.0) 2.54 (0.1) 2.54 (0.1) dimensions in mm, () = inch heat-sink (option)
|
