t echnical data sheet wsmp adaptor (bullet) female to female w1k10p - k00d3 rosenberger of north america, llc p.o. box 309 akron, pa usa 17501 www.rosenbergerna.com tel. : + 1.717.859.8900 fax : + 1.717.859.7044 e mail : info@rosenbergerna.com page 1 / 2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg all dimensions are in inches [mm] interface according to rosenberger wsmp? interface standards material and plating connector parts material plating body becu hard gold , 50in [1,27m] min , over n ickel , 50in [1,27m] min contact becu hard gold, 50in [1,27m] min, over nickel, 50in [1,27m] min dielectric s p tfe
t echnical data sheet wsmp adaptor (bullet) female to female w1k10p - k00d3 rosenberger of north america, llc p.o. box 309 akron, pa usa 17501 www.rosenbergerna.com tel. : + 1.717.859.8900 fax : + 1.717.859.7044 e mail : info@rosenbergerna.com page 2 / 2 rf_35/05.10/6.0 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg electrical data impedance 5 0 ? frequency dc to 4 0 ghz return loss (typical) ? 26 db, dc to 26.5 ghz ? 19 db, 26.5 to 65 gh z insertion loss ? 0.12 x db insulation resistance ? 3. 5 x10 3 m ? center contact resistance ? 2.0 m ? outer contact resistance ? 6.0 m ? test voltage (at sea level) 250 v rms rf high potential (at sea level) 150 v rms @ 5 mhz rf - leakage ? - 80 db (typical mated pair) - limitations are possi ble due to the used cable type mechanical data mating cycles - full detent ? 1 00 - smooth bore ? 500 engagement force (typical) - full detent 2.5 lb f [ 11 n] - smooth bore 1.2 lb f [5.3 n] - disengagement force (typical) - smooth bore 4.5 lb f [ 20 n] - smooth bore 1.0 lb f [4.5 n] environmental data temperature range - 55 c to +165 c thermal shock mil - std - 202, method 107, condition b corrosion mil - std - 202, method 101 vibration mil - std - 202, method 204, condition d shock mil - std - 202, method 213, condition i moistur e resistance mil - std - 2 02, method 106 , except step 7b 2002/95/ec (rohs) compliant tooling insertion/ extraction tool w1w002 - 000 suitable cables n/a packing standard 100 pcs in a bag draft date approved date rev. engineering change number name date r. hosler 8/8 /14 m. peeran 8/8 /14 a 00 14 - s000; released m. peeran 8/8 /14 f(ghz)
|
