page 1 of 7 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com the big deal ? ultra low noise figure, 0.38 db ? high gain, high ip3 ? small size, 2 x 2 x 1mm product overview mini-circuits PMA2-33LN+ is an e-phemt based, ultra-low noise mmic amplifer with a unique combina - tion of low noise and high ip3, making this amplifer ideal for sensitive, high-dynamic range receiver applica - tions. this design operates on a single 3v supply, is well matched for 50 ? systems, and comes in a tiny, low-profle package accommodating dense circuit board layouts. feature advantages ultra low noise, 0.38 db at 0.9 ghz enables lower system noise fgure performance. high ip3, ? +34 dbm at 0.9 ghz and ? +39 dbm at 3 ghz combination of low noise and high ip3 makes this mmic amplifer ideal for use in low noise receiver front end (rfe) as it gives the user advantages of sensitivity & two-tone im performance at both ends of the dynamic range. low operating voltage, 3v achieves high ip3 using lower voltage compared to other devices of its kind. 2 x 2mm 8-lead mclp package tiny footprint saves space in dense layouts while providing low inductance, repeatable transitions, and excellent thermal contact to pcb. max input power ? 27 dbm (5 minutes) ? 14 to +22 dbm (continuous) ruggedized design provides high power handling for input powers common at receiver inputs, eliminating the need for an external limiter in most cases high reliability low signal operating current of 56 ma nominal maintains junction temperatures typi - cally below 93c at 85c ground lead temperature. key features 2mm x 2mm PMA2-33LN+ 50 ? 0.4 to 3.0 ghz ultra low noise, high ip3 monolithic amplifer
page 2 of 7 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com simplifed schematic & pad description function pad number description (see figure 1) rf in 2 connects to rf input via c1 and pad 1 via l1 rf-out & dc-in 7 connects to rf out via c2 and v s via l2 & r2 ground paddle connects to ground bias 1 connects to supply voltage (v dd ) via r1 & r6 no connection 3,4,5,6,8 not used internally. connected to ground on test board case style: mc1631-1 PMA2-33LN+ product features ? ultra low noise fgure, 0.38 db at 0.9 ghz ? high ip3, 34 dbm typ. at 0.9 ghz, +39 dbm at 3 ghz ? high pout, p1db 17.2 dbm typ. at 0.9 ghz ? class 1a hbm esd rating (250v) rev. a m151107 PMA2-33LN+ th/rs/cp 150924 general description the PMA2-33LN+ (rohs compliant) amplifer is fabricated using 0.25 m e-phemt technology and offers extremely high dynamic range with ultra low noise fgure and good input and output return loss. lead fnish is snagni. it has repeatable performance from lot to lot and is enclosed in a 2mm x 2mmx 1mm package for very good thermal performance. typical applications ? base station infrastructure ? portable wireless ? lte ? gps ? gsm ? airborne radar 0.4-3.0 ghz ultra low noise, high ip3 (top view) monolithic amplifer +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
page 3 of 7 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com parameter ratings operating temperature (ground -40c to 85c storage temperature -65c to 150c junction temperature 150c total power dissipation 0.5 w input power (cw), vd=3v(note5) +27dbm (5minutes max) +14 dbm to 1.5 ghz and +22 dbm over 1.5 to 3 ghz (continuos) dc voltage 5.5 v note: (4) permanent damage may occur if any of these limits are exceeded. electrical maximum ratings are not intended for continuous normal operation. (5) measured on mini-circuits test board, tb-736+ absolute maximum ratings 4 electrical specifcations (1) at 25c and 3v, unless noted PMA2-33LN+ parameter condition (ghz) min. typ. max. units frequency range 0.4 3.0 ghz (1) measured on mini-circuits characterization test board tb-736+. see characterization test circuit (fig. 1) (2) current increases at p1db (3) (current at 85c - current at -45c)/130 noise figure 0.4 0.78 db 0.9 0.38 0.6 1.5 0.36 2.0 0.46 3.0 0.78 gain 0.4 24.4 db 0.9 19.1 1.5 14.9 2.0 12.5 3.0 9.1 input return loss 0.4 9.5 db 0.9 10.2 1.5 10.0 2.0 10.4 3.0 12.3 output return loss 0.4 20.1 db 0.9 19.3 1.5 17.4 2.0 17.3 3.0 18.2 output power @1 db compression (2) 0.4 17.0 dbm 0.9 17.2 1.5 17.0 2.0 17.5 3.0 17.3 output ip3 0.4 30.4 dbm 0.9 34.5 1.5 35.6 2.0 37.5 3.0 38.6 device operating voltage 3.0 v device operating current at 3v (2) 56 67 ma device current variation vs. temperature at 3v (3) -27 a/c device current variation vs. voltage at 25c 0.025 ma/mv thermal resistance, junction-to-ground lead 54 c/w monolithic e-phemt mmic amplifer
page 4 of 7 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com PMA2-33LN+ recommended application and characterization test circuit product marking pma2 33ln black body model family designation index over pin 1 fig 1. application and characterization circuit ote: this block diagram is used for characterization. (dut soldered on mini-circuits characterization test board tb-736+) gain, return loss, output power at 1db compression (p1 db) , output ip3 (oip3) and noise fgure measured using agilents n5242a pna-x microwave network analyzer. conditions: 1. gain and return loss: pin= -25dbm 2. output ip3 (oip3): two tones, spaced 1 mhz apart, 0 dbm/tone at output. component value size c1, c2 100pf 0402 c3, c6 4.7f 0402 c4 33pf 0402 c5 not used l1, l2 33nh 0402 r1 0 ? 0402 r2 10 ? 0603 rb 4.02k ? 0402 monolithic e-phemt mmic amplifer
page 5 of 7 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com PMA2-33LN+ noise parameters notes: 1) dut soldered on test board (50 ohm input and output) 2) reference plane is at the end of the rf-in pad and the output reference plane is at the end of the rf-out pad as shown in fgure below frequency (mhz) fmin (db) opt magnitude opt angle rn/50 800 0.26 0.066 79.6 0.039 900 0.22 0.086 98.2 0.032 1000 0.22 0.108 102.9 0.032 1500 0.25 0.214 135.0 0.021 2000 0.27 0.237 -169.4 0.028 2500 0.32 0.317 -162.8 0.022 3000 0.43 0.381 -141.7 0.035 rf-input reference plane rf-output reference plane monolithic e-phemt mmic amplifer
page 6 of 7 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com PMA2-33LN+ rb vs. dc current 30 35 40 45 50 55 60 65 3 3.5 4 4.5 5 5.5 6 6.5 rb(k ?) ma gain vs. frequency & rb 0 5 10 15 20 25 30 0 1000 2000 3000 4000 mhz db 6.2 k ? 5.1 k ? 4.7 k ? 4.02 k ? 3.6 k ? s22 (-output return loss) vs. frequency & rb -40 -35 -30 -25 -20 -15 -10 -5 0 0 1000 2000 3000 4000 mhz db 6.2 k ? 5.1 k ? 4.7 k ? 4.02 k ? 3.6 k ? s11 (-input return loss) vs. frequency & rb -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 0 1000 2000 3000 4000 mhz db 6.2 k ? 5.1 k ? 4.7 k ? 4.02 k ? 3.6 k ? p1db vs. frequency & rb 10 12 14 16 18 20 22 0 1000 2000 3000 4000 mhz dbm 6.2 k ? 5.1 k ? 4.7 k ? 4.02 k ? 3.6 k ? oip3 vs. frequency & rb 25 27 29 31 33 35 37 39 41 43 45 0 1000 2000 3000 4000 mhz dbm 6.2 k ? 5.1 k ? 4.7 k ? 4.02 k ? 3.6 k ? nf vs. frequency & rb 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 1000 2000 3000 4000 mhz db 6.2 k ? 5.1 k ? 4.7 k ? 4.02 k ? 3.6 k ? electrical performance vs. rb monolithic e-phemt mmic amplifer
page 7 of 7 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com PMA2-33LN+ esd rating human body model (hbm): class 1a (250 to <500v) in accordance with ansi/esd stm 5.1 - 2001 machine model (mm): class m1 (pass 25v) in accordance with ansi/esd stm5.2-1999 msl rating moisture sensitivity: msl1 in accordance with ipc/jedec j-std-020d performance data data table swept graphs s-parameter (s2p files) data set (.zip fle) case style mc1631-1 plastic package, exposed paddle, lead fnish: tin silver nickel tape & reel f66 standard quantities available on reel 7 reels with 20, 50, 100, 200, 500,1k or 2k devices suggested layout for pcb design pl-400 evaluation board tb-736+ environmental ratings env08t1 additional detailed technical information additional information is available on our dash board. to access this information click here msl test flow chart additional notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp visual inspection electrical test sam analysis refow 3 cycles, 260c soak 85c/85rh 168 hours bake at 125c, 24 hours visual inspection electrical test sam analysis start finish monolithic e-phemt mmic amplifer
|
