power detectors - s m t 1 hmc713ms8 / 713ms8e v06.0412 54 db, logarithmic detector / controller, 45 - 2700 mhz general description features functional diagram t he hm c 71 3m s 8( e ) lo garithmic detector/ c on trol - ler is ideal for converting r f si gnals with frequencies in the 45 mhz to 2700 mhz range, to a proportional d c voltage at its output. t he hm c 71 3m s 8( e ) em ploys a successive compression technology which delivers 54 db of dynamic range with high conversion accuracy over a wide input frequency range. as the input signal is increased, successive amplifers move into saturation one by one creating an accurate approximation of the logarithm function. t he o utputs of a series of detectors are summed, converted into voltage domain and buffered to drive the o u t o utput. for detection mode, the o u t p in is connected to the v se t i nput and will provide a nominal logarithmic slope of 17 mv/db and an intercept of -68 dbm. t he h m c 71 3m s 8( e ) ca n also be used in the controller mode where an external voltage is applied to the v se t p in to create an ag c o r ap c f eedback loop. w id e dynamic r an ge: up to 54 db high accuracy: 1 d b with 54 db r an ge up t o 2. 7 ghz fast o utp ut r es ponse t ime s up ply voltage: +2.7 to +5.5v power-down mode e xc ellent s t ability over t em perature m so p- 8 s m t p ackage: 14.8 mm2 typical applications t he hm c 713m s 8( e ) is i deal for: ? cellular infrastructure ? wimax, wibro & lte/4g ? power monitoring & control circuitry ? receiver signal strength indication (rssi) ? automatic gain & power control ? military, ecm & radar electrical specifcations, t a = +25 c, vcc= +3v [1] parameter t y p. t y p. t y p. t y p. t y p. t y p. units input frequency 45 100 900 1900 2200 2700 mhz 3 db dynamic r an ge 60 61 61 62 62 68 db 3 db dynamic r an ge c en ter -26 -28 -28 -30 -31 -27 dbm 1 db dynamic r an ge 53 54 54 54 53 59 db o u t s lope 1 7. 3 17. 3 17. 2 17.1 17.1 17. 2 mv/db out intercept -68 -68 -69 -71 -72 -70 dbm variation of o u t w ith t em perature from -40c to +85c @ -20 dbm input -0.8 -1 -0.9 -0.5 -0.6 -0.5 db [1] detector mode measurements; o u t ( pin 6) is shorted to v se t ( pin 3) through an r c n etwork. for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
power detectors - s m t 2 hmc713ms8 / 713ms8e v06.0412 54 d b, logarithmic det ector / controller, 45 - 2700 mhz electrical specifcations, (continued) parameter c ondi tions min. t y p. max. units power down (en) interface voltage r an ge for normal mode 0.8 x vcc v voltage r an ge for powerdown mode 0.2 x vcc v t hr eshold voltage vcc/2 v power supply (vcc) o pe rating voltage r ang e 2.7 - 5.5 v s up ply c ur rent in normal mode 17 ma s up ply c ur rent in power down mode 0.3 ma out interface r is e t ime c lp f= 0, no power to -10 dbm, 10% - 90% 24 ns fall t ime c lp f= 0, -10 dbm to no power, 90% - 10% 70 ns o utput video b w 3 db r eduction in demodulated output voltage 16 mhz voltage r ang e c lo sed loop ( e va l board s et up) 0.2 - 1.2 v voltage r ang e o pe n loop 0.1 to (vcc - 0.1) v c ur rent drive s ou rce / s in k 3.5 / 0.51 ma outn interface c ur rent drive s ou rce / s in k 3.6 / 0.47 ma outn interface o utput voltage r a nge 0.2 - 2.1 v rf input input return loss (s11) f= 50 mhz to 2.5 ghz z 0 = 50, s ee p lot 10 db vset interface input impedance 1 m input voltage range e val board 0.2 - 1.2 v low frequency gain v se t t o o u t 64 db o pen loop c or ner frequency 11 khz for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
power detectors - s m t 3 hmc713ms8 / 713ms8e v06.0412 54 d b, logarithmic det ector / controller, 45 - 2700 mhz output voltage & error vs. input power, fin = 2700 mhz output voltage & error vs. input power, fin = 2200 mhz output voltage & error vs. input power, fin = 1900 mhz unless otherwise noted: vcc= +3v, t a = +25 c 0 0.4 0.8 1.2 1.6 2 2.4 -6 -4 -2 0 2 4 6 -60 -50 -40 -30 -20 -10 0 10 out err +25c out err +85c out err -40c out n err +25c out n err +85c out n err -40c out, outn (v) error (db) input power (dbm) out out n 0 0.4 0.8 1.2 1.6 2 2.4 -6 -4 -2 0 2 4 6 -60 -50 -40 -30 -20 -10 0 10 out err +25c out err +85c out err -40c out n err +25c out n err +85c out n err -40c out, outn (v) error (db) nput power (dbm) out out n 0 0.4 0.8 1.2 1.6 2 2.4 -6 -4 -2 0 2 4 6 -60 -50 -40 -30 -20 -10 0 10 out err +25c out err +85c out err -40c out n err +25c out n err +85c out n err -40c out, outn (v) error (db) input power (dbm) out out n output voltage & error vs. input power, fin = 900 mhz output voltage & error vs. input power, fin = 100 mhz 0 0.4 0.8 1.2 1.6 2 2.4 -6 -4 -2 0 2 4 6 -60 -50 -40 -30 -20 -10 0 10 out err +25c out err +85c out err -40c out n err +25c out n err +85c out n err -40c out, outn (v) error (db) input power (dbm) out out n 0 0.4 0.8 1.2 1.6 2 2.4 -6 -4 -2 0 2 4 6 -60 -50 -40 -30 -20 -10 0 10 out err +25c out err +85c out err -40c out n err +25c out n err +85c out n err -40c out, outn (v) error (db) input power (dbm) out out n output voltage & error vs. input power, fin = 45 mhz 0 0.4 0.8 1.2 1.6 2 2.4 -6 -4 -2 0 2 4 6 -60 -50 -40 -30 -20 -10 0 10 out err +25c out err +85c out err -40c out n err +25c out n err +85c out n err -40c out, outn (v) error (db) input power (dbm) out out n for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
power detectors - s m t 4 hmc713ms8 / 713ms8e v06.0412 54 d b, logarithmic det ector / controller, 45 - 2700 mhz unless otherwise noted: vcc= +3v, t a = +25 c out slope vs. frequency out slope vs. supply voltage out vs. frequency & input power out voltage & error vs. frequency out intercept vs. supply voltage out intercept vs. frequency 0 0.3 0.6 0.9 1.2 1.5 1.8 -6 -4 -2 0 2 4 6 -60 -50 -40 -30 -20 -10 0 10 0.045ghz 0.1ghz 0.9ghz 1.9ghz 2.2ghz 2.7ghz out (v) error (db) input power (dbm) out error 14 15 16 17 18 19 20 0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 +25c slope +85c slope -40c slope frequency (ghz) slope (mv/db) 15 16 17 18 19 20 2.7 3.1 3.5 3.9 4.3 4.7 5.1 5.5 0.045ghz 0.1ghz 0.9ghz 1.9ghz 2.2ghz 2.7ghz slope (mv/db) voltage supply (v) -100 -90 -80 -70 -60 -50 0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 +25c intercept +85c intercept -40c intercept frequency (ghz) intercept (dbm) -100 -90 -80 -70 -60 -50 2.7 3.1 3.5 3.9 4.3 4.7 5.1 5.5 0.045ghz 0.1ghz 0.9ghz 1.9ghz 2.2ghz 2.7ghz intercept (dbm) voltage supply (v) 0 0.2 0.4 0.6 0.8 1 1.2 1.4 0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 frequency (ghz) out (v) 0dbm -10dbm -20dbm -30dbm -40dbm -50dbm -60dbm for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
power detectors - s m t 5 hmc713ms8 / 713ms8e v06.0412 54 d b, logarithmic det ector / controller, 45 - 2700 mhz output response rise time @ 900 mhz, c1 = open output response rise time @ 900 mhz, c1 = 10nf unless otherwise noted: vcc= +3v, t a = +25 c output response fall time @ 900 mhz, c1 = open output response fall time @ 900 mhz, c1 = 10nf input return loss 0 0.3 0.6 0.9 1.2 1.5 0 50 100 150 200 250 300 350 400 450 500 0dbm -10dbm -20dbm -30dbm time (ns) out (v) 0 0.3 0.6 0.9 1.2 1.5 0 25 50 75 100 125 150 175 200 0dbm -10dbm -20dbm -30dbm time (us) out (v) 0 0.3 0.6 0.9 1.2 1.5 0 50 100 150 200 250 300 350 400 450 500 0dbm -10dbm -20dbm -30dbm time (ns) out (v) 0 0.3 0.6 0.9 1.2 1.5 0 10 20 30 40 50 60 70 80 90 100 0dbm -10dbm -20dbm -30dbm time (us) out (v) -50 -40 -30 -20 -10 0 0 0.5 1 1.5 2 2.5 3 frequency (ghz) return loss (db) for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
power detectors - s m t 6 hmc713ms8 / 713ms8e v06.0412 54 d b, logarithmic det ector / controller, 45 - 2700 mhz absolute maximum ratings vcc 0 to +5.6v e n 0 t o +5.6v v se t 0 to + 5.6v o u t o utput c ur rent 5 ma o u t n o utput c ur rent 5 ma rf input power 12 dbm junction t em perature 125 c c on tinuous pdiss ( t = 8 5 c ) (d erate 5.43 m w / c a bove 85 c ) 0. 22 w att s t h ermal r es istance ( r th ) (junction to lead) 184 c / w s to rage t em perature -65 to +150 c o per ating t em perature -40 to +85 c es d s en sitivity (hbm) c la ss 1 c electrostatic sensitive device observe handling precautions package information outline drawing part number package body material lead finish m s l r ati ng package marking [3] hm c 713m s 8 l ow stress injection molded plastic s n/ pb s olde r m s l 1 [1] h713 xxxx hm c 71 3m s 8 e ro hs-compliant low stress injection molded plastic 100% matte s n m s l 1 [2] h713 xxxx [1] max peak refow temperature of 235 c [2 ] max peak refow temperature of 260 c [3 ] 4-digit lot number xxxx n otes : 1. pa ckage body material: low stress injection molded plas tic silica and silicon impregnated. 2. lead material: copper alloy 3. lead plating: 100% matte tin 4. dimensions are in inches [millimeter s]. 5. dimension does not include moldfla sh of 0.15mm per side. 6. dimension does not include moldfla sh of 0.25mm per side. 7. all g r o und l e ad s mu s t b e so ld ere d to p c b r f g r o und . for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
power detectors - s m t 7 hmc713ms8 / 713ms8e v06.0412 54 d b, logarithmic det ector / controller, 45 - 2700 mhz pin number function description interface schematic 1 inp r f in put pin. 2 e n e na ble pin. apply v e n >0 .8 x vcc for normal operation. apply v e n <0 .2xvcc to disable the hm c 71 3m s 8 e a nd reduce supply current to 0.3ma. t o e nsure proper start-up apply the power-up sequence shown in the power-up t im ing diagram attached to the application circuit. 3 v se t s et p oint input for controller mode. c on nect to o u t w ith the resistor network shown in evaluation board drawing for detector mode. 4 c lp f c on nection for ground referenced external lowpass flter capacitor. 5 gnd device ground. pin descriptions for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
power detectors - s m t 8 hmc713ms8 / 713ms8e v06.0412 54 d b, logarithmic det ector / controller, 45 - 2700 mhz pin number function description interface schematic 6 o u t lo garithmic output that converts the input power to a d c l evel in controller mode. o ut put voltage increases with increasing amplitude 7 o u t n in verted logarithmic output. o u t n= 2 .55 - 2 x o u t 8 vcc b ias s up ply. c on nect supply voltage to all this pin with appropriate fltering. pin descriptions (continued) for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
power detectors - s m t 9 hmc713ms8 / 713ms8e v06.0412 54 d b, logarithmic det ector / controller, 45 - 2700 mhz application & evaluation pcb schematic power-up timing diagram notes note 1: the hmc713ms8(e) evaluation board is pre-assembled for single-ended input, and detector/rssi mode. note 2: for detector mode, connect high impedance volt meter to the o u t / o u t n po rt. note 3: for controller mode, remove r6 & c3 and install 1k ? resistor (r4) and 100pf capacitor (c2), then make appropriate connection to out and vset. in controller mode, the out / outn output can be used to drive a variable gain amplifer, or a variable attenuator, either directly or through a buffer or microcontroller. v se t s hould be connected to an external supply, typically between +0.2 and +1.2v. note 4: an external capacitance c 1 ca n be connected to c lp f port for additional fltering of o u t a nd o u t n ou tputs.. for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
power detectors - s m t 10 hmc713ms8 / 713ms8e v06.0412 54 d b, logarithmic det ector / controller, 45 - 2700 mhz item description j1 - j3 p c moun t s ma c onne ctor j5 - j7 d c p in c 3 1 pf c ap acitor, 0402 pkg. c 6 0 .1 f c ap acitor, 0402 pkg. r 1 , r 7, r 1 0 0 r es istor, 0402 pkg. r 2 5 1 r es istor, 0402 pkg. r 3, r 5 10 k r es istor, 0402 pkg. r 6 1 k r es istor, 0402 pkg. u1 hm c 71 3m s 8 ( e ) lo garithmic detector / c on troller p c b [2] 121944 e valuation p c b [1 ] r ef erence this number when ordering complete evaluation p c b [2 ] c ir cuit board material: arlon 25f r o r r og ers 4350 evaluation pcb t he circuit board used in the application should us e r f c ircuit design techniques. s ig nal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be con - nected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. t he e valuation circuit board shown is available from hittite upon request. list of materials for evaluation pcb 121947 [1] for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
|
