1 ? feature s magnetic sensor ideal for security of gaming machines ? slim type . ? p roviding substantial highly - sensitive detection. ? type code s tandard type w2dh - 0 1 (1) represents a magnetic sensor (1) (2) (2) represents a series name ? rating/ p erformance item rating/performance detection distance (*1) top facing up: 7 0 to 9 0 mm side facing up: 5 0 to 7 0 mm (reference) electrical rating 5 dcv ( - 10%) to 24 dcv (+10%) 1 to 100 ma resistive load contact configuration 1 a (normally open contact) contact resistance 300 m? or less (default: 12 dcv 10 ma resistive load) insulation resistance 100 m? or more (under 100 dcv) withstand voltage 150 acv 50/60 hz 1 min bounce time 0.5 msec or less vibration malfunction: 10 to 55 hz, 1.5 mm double amplitude impact malfunction: 100 m/s 2 life 1 million times or more (12 dcv 10 ma resistive load) ambient temperature when in operation: - 10 to 60 deg c ( must be f ree from freezing or condensation) when stored: - 20 to 70 deg c (must be free from freezing or condensation) ambient humidity 25 to 85% rh *1 detection distance refers to the distance l at which non - conducting state changes into conducting state during the approach of a standard magnet to w2dh -01 under the arrangements shown in fig ures 1 and 2. standard magnet: 20 x 20 x 10 (mm)/surface magnetic flux 430 mt (millitesla)/direction of m agnetization: d irection of t hickness ? connection diagram l l w2dh - 01 w2dh - 01 type w2dh - 01 slim magnetic sensor fig ure 1. top facing up standard magnet standard magnet fig ure 2 side facing up
2 w2dh -01 ? exterior d imensions ? precautions for u se (1) when installing the sensor near the source of magnetism generation (motor, solenoid, etc.), check that the sensor does not malfunction before using it. (2) the detection range of the sensor installed in an amusement machine changes depending on the arrangement of the surrounding magnetic substances (mainly metals including iron). with the surrounding magnetic substances attached, check that the detection range is appropriate before using it. brand name type code lot n umber note: 1. the housing compatible with the connector shall be type phr - 2 made by jst co., ltd. [unit: mm] pin no.1
3 w2 ' +-0
4 omron on-line global - http://www.omron.com usa - http://www.components.omron.com cat. no. W2DH-01(e)r01 printed in usa omron electronic components llc 847-882-2288 11/14 specifications subject to change without notice all sales are subject to omron electronic components llc standard terms and conditions of sale, which can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html all dimensions shown are in millimeters. to convert millimeters into inches, multiply by 0.03937. to convert grams into ounces, multiply by 0.03527.
|
