View EALP00SXBYA0-AM_9108297.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 copyright ? 2010, everlight americas inc. all rights reserved. release date : may.25.2013. issue no 1 www.everlight americas .com p - led ealp00sxbya0 - am lead (pb) free product - rohs compliant feature ? p iranha package. ? colorless clear resin. ? low thermal resistance . ? packaged in t ubes f or automatic insertion equipment. ? total flux: 5650 to 11250 mlm at 7 0ma . ? qualificat ion according to aec - q101 . ? compliance with eu reach. ? compliance halogen free .(br <900 ppm ,cl <900 ppm , br+cl < 1500 ppm). ? applications ? automotive lighting ? electronic s igns and s ignals ? general l ighting application device selection guide chip emitted c olor resin color material algainp yellow water clear
datasheet p - led ealp00sxbya0 - am 2 copyright ? 2010, everlight all rights reserved. release date : may.25.2013 . issue no dpe - 0000161 rev.2 www.everlight.com table of content page product nomenclature 3 absolute maximum ratings (ta=25 ) 4 electro - optical characteristics (ta=25 ) 5 bin range of dominant wavelength (ta=25 ) 6 bin range of forward v oltage (ta=25 ) 7 bin range of total flux (ta=25 ) 8 typical electro - optical characteristics curves 9 package dimension s 11 lable explanation 12 antistatic packing materials tube and standard boxes 1 2 precautions 1 3 revision history 1 6
datasheet p - led ealp00sxbya0 - am 3 copyright ? 2010, everlight all rights reserved. release date : may.25.2013 . issue no dpe - 0000161 rev.2 www.everlight.com absolute maximum ratings (ta=25 parameter symbol rating unit reverse voltage v r 5 v continuous forward current i f 70 ma peak forward current (duty 1/10 @1khz) i fp 100 ma power dissipation p d 200 mw junction temperature t j 115 operating temperature t opr - 40 ~ + 100 storage temperature t stg - 40 ~ +1 0 0 thermal resistance rth j - a 165 k/w esd (classification acc. aec q101) esd hbm esd mm 2000 200 v soldering temperature(t=5 sec) t sol 260 5
datasheet p - led ealp00sxbya0 - am 4 copyright ? 2010, everlight all rights reserved. release date : may.25.2013 . issue no dpe - 0000161 rev.2 www.everlight.com electro - optical characteristics (ta=25 parameter symbol min. typ. max. unit condition total flux v 5650 --- 11250 mlm i f = 70 ma peak wavelength p ----- 594 ----- nm i f = 70 ma dominant wavelength d 589 --- 598 nm i f = 70 ma spectrum rad iation bandwidth ? ----- 1 5 ----- nm i f = 70 ma viewing angle 2 1/2 ----- 130 ----- deg i f = 70 ma forward voltage v f 1.9 --- 2.9 v i f = 70 ma reverse current i r ----- ----- 10 a v r =5v note: 1. tolerance of total flux : 11% 2. tolerance of dominant w avelength: 1nm 3. tolerance of forward voltage: 0.1v
datasheet p - led ealp00sxbya0 - am 5 copyright ? 2010, everlight all rights reserved. release date : may.25.2013 . issue no dpe - 0000161 rev.2 www.everlight.com bin range of forward voltage bin min. max. unit condition 1 1.9 2.1 v i f = 70 ma 2 2.1 2.3 3 2.3 2.5 4 2.5 2.7 5 2.7 2.9 note: tolerance of forward voltage: 0.1v
datasheet p - led ealp00sxbya0 - am 6 copyright ? 2010, everlight all rights reserved. release date : may.25.2013 . issue no dpe - 0000161 rev.2 www.everlight.com bin range of dominant wavelength note: tolerance of dominant wavelength: 1nm bin min. max. unit condition 2 589 592 nm i f = 70 ma 3 592 595 4 595 598
datasheet p - led ealp00sxbya0 - am 7 copyright ? 2010, everlight all rights reserved. release date : may.25.2013 . issue no dpe - 0000161 rev.2 www.everlight.com bin range of total flux bin min. max. unit condition s 2 5650 7150 mlm i f = 70 ma t 1 7150 9000 t 2 9000 11250 note: tolerance of total flux : 11%
datasheet p - led ealp00sxbya0 - am 8 copyright ? 2010, everlight all rights reserved. release date : may.25.2013 . issue no dpe - 0000161 rev.2 www.everlight.com typical electro - optical characteristics curves typical c urve of s pectral d istribution relative int ensity( ) w (nm) note : v( )=standard eye response curve ; i f = 2 0ma diagram characteristics of r adiation relative intensity (a.u.) view angle (degree) 0.0 0.2 0.4 0.6 0.8 1.0 viewing angle (degree) relative intensity (a.u.) -90 0 -70 0 -50 0 -30 0 -10 0 90 0 80 0 60 0 70 0 40 0 50 0 30 0 20 0 10 0 0 0 0 50 100 400 450 500 550 600 650 700
datasheet p - led ealp00sxbya0 - am 9 copyright ? 2010, everlight all rights reserved. release date : may.25.2013 . issue no dpe - 0000161 rev.2 www.everlight.com forward current vs. forward voltage (ta=25 ) dominant wavelength vs. forward current (ta=2 5 ) forward current (ma) dominant wavelength (nm) forward voltage (v) forward current (ma) relative luminous intensity vs. forward current (ta=25 ) max. permissible forward current vs. ambient temperature relative luminous intensity forward c urrent (ma) forward current (ma) ambient temperature ( ) 0.0 0.2 0.4 0.6 0.8 1.0 0 10 20 30 40 50 60 70 forward current relative intensity 0.0 10.0 20.0 30.0 40.0 50.0 60.0 70.0 80.0 90.0 100.0 0.0 20.0 40.0 60.0 80.0 100.0 0 10 20 30 40 50 60 70 80 90 100 1.7 1.9 2.1 2.3 2.5 2.7 587 588 589 590 591 592 593 0 10 20 30 40 50 60 70 80 90 100
datasheet p - led ealp00sxbya0 - am 10 copyright ? 2010, everlight all rights reserved. release date : may.25.2013 . issue no dpe - 0000161 rev.2 www.everlight.com package dimension note: 1. tolerances unless mentioned 0.25mm. unit = mm 2. an epoxy meniscus may extend about 1.5mm(0.059") down the leads
datasheet p - led ealp00sxbya0 - am 11 copyright ? 2010, everlight all rights reserved. release date : may.25.2013 . issue no dpe - 0000161 rev.2 www.everlight.com antistic pack ing materials tube tube label explanation ? qty: packing quantity ? lot no: lot number ? cat: rank of (vf)(note* 1 )( note* 2 ) note 1 : d /cie/color temperature note 2 : luminous intensity / total flux note: toleran ces unless mentioned 2.0mm. unit = mm standard box outer label explanation ? cpn: customers product number ? p/n: product number ? qty: packing quantity ? cat: rank of (vf)(note* 1 )( note* 2 ) note 1 : d /cie/col or temperature note 2 : luminous intensity / total flux ? hue/ref: reference ? lot no: lot number note: tolerances unless mentioned 3.0mm. unit = mm label area
datasheet p - led ealp00sxbya0 - am 12 copyright ? 2010, everlight all rights reserved. release date : may.25.2013 . issue no dpe - 0000161 rev.2 www.everlight.com packing quantity packing material length width height (mm) tube quantity (pcs) led quantity (pcs) tube height 485 x 9.5 x 12 1 60 standard box 510 x 100 x 45 30 1800 large box 510 x 150 x 90 105 6300 note: 1. normal packing specification is use standard box, unless already defined initially. 2. vacuum packing with anti - static bag after packing in standard box. 3. specifications are subject to change without prior notice. notes 1. lead forming ? during lead formation , the leads should be bent at a point at least 3mm from the base of the epoxy bulb. ? lead forming sho uld be done before soldering. ? avoid stressing the led package during leads forming . the stress to the base may damage the leds characteristics or it may break the leds. ? cut the led leadframes at room temperature. cutting the leadframes at high temperature s may cause failure of the leds. ? when mounting the leds onto a pcb , the pcb holes must be aligned exactly with the lead position of the led. if the leds are mounted with stress at the leads, it causes deterioration of the epoxy resin and this will degrade the leds. 2. storage ? the leds should be stored at 30c or less and 6 0%rh or less after being shipped from everlight americas and the storage life limits are 3 months. if the leds are stored for 3 months or more, they can be stored for a year in a sealed conta iner with a nitrogen atmosphere and moisture absorbent material. ? please avoid rapid transitions in ambient temperature, especially, in high humidity environments where condensation can occur. 3. soldering ? careful attention should be paid during soldering. sol der the led no lower than 1.6mm from the base of stopper is recommended. ? avoiding applying any stress to the lead frame while the leds are at high temperature particularly when soldering.
datasheet p - led ealp00sxbya0 - am 13 copyright ? 2010, everlight all rights reserved. release date : may.25.2013 . issue no dpe - 0000161 rev.2 www.everlight.com ? recommended soldering conditions: hand soldering dip soldering temp . at tip of iron 3 00 max. (30w max.) preheat temp. 100 max. (60 sec max.) soldering time 3 sec max. bath temp. 26 0 max. distance n o lower than 1.6mm from the base of stop per bath time. 5 sec max. distance n o lower than 1.6mm from the base of stop per ? dip and hand soldering should not be done more than one time . ? after soldering the leds, the epoxy bulb should be protected from mechanical shock or vibration until the leds return to room temperature. ? a rapid - rate process is not recommended for cooling t he leds down from the peak temperature. ? although the recommended soldering conditions are specified in the above table, dip or handsoldering at the lowest possible temperature is desirable for the leds. ? wave soldering parameter must be set and maintain acc ording to recommended temperature and dwell time in the solder wave. 4. cleaning ? when necessary, cleaning should occur only with isopropyl alcohol at room temperature for a duration of no more than one minute . dry at room temperature before use. ? do not clean the leds by the ultrasonic. when it is absolutely necessary, the influence of ultrasonic cleaning on the leds depends on factors such as ultrasonic power and the assembled condition. ultrasonic cleaning shall be pre - qualified to ensure this will not cause damage to the led 5. heat management ? heat management of leds must be taken into consideration during the design stage of led application. the current should be de - rated appropriately by referring to the de - rating curve found in each product specification. ? th e temperature surrounding the led in the application should be controlled. please refer to the data sheet de - rating curve. 6. esd (electrostatic discharge) ? electrostatic discharge (esd) or surge current (eos) can damage leds. ? an esd wrist strap, esd shoe stra p or antistatic gloves must be worn whenever handling leds. ? all devices, equipment and machinery must be properly grounded. ? use ion blower to neutralize the static charge which might have built up on surface of the leds plastic le ns as a result of friction between leds during storage and handing .
datasheet p - led ealp00sxbya0 - am 14 copyright ? 2010, everlight all rights reserved. release date : may.25.2013 . issue no dpe - 0000161 rev.2 www.everlight.com 7. other ? above specification may be changed without notice. everlight americas will reserve authority on material change for above specification. ? when using this product, please observe the absolute maximum ratings a nd the instructions for using outlined in these specification sheets. everlight americas assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in the se specification sheets. ? these specification sheets include materials protected under copyright of everlight americas corporation. please dont reproduce or cause anyone to reproduce them without everlight americas s consent.
datasheet p - led ealp00sxbya0 - am 15 copyright ? 2010, everlight all rights reserved. release date : may.25.2013 . issue no dpe - 0000161 rev.2 www.everlight.com revi sion history rev. modified date file modified contents 2 2013/5/25 change the form of datasheet

▲Up To Search▲

Price & Availability of EALP00SXBYA0-AM

	To Download EALP00SXBYA0-AM Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .