kaye valprobe ? cryo temperature logger with thin and very fexible sensor the new cryo logger with the very thin and fexible tip is the perfect datalogger for an extended temperature range from -85c to +140c. the logger provides a single solution for a variety of applications, such as cryogenic chambers, lyophilizers, ultra-low freezers and other deep temperature applications. it is also perfect to be used in autoclaves and other high temperature applications. it is a single solution that provides signifcant cost savings and productivity gains. rtd technology delivers unrivalled measurement accuracy. the new logger design improves the battery life by three times over the existing design and is fully compatible with existing multi channel and single readers operating seamlessly with the valprobe 1.6 software. the new fexible cryo logger is designed for easy on-site user verifcation between studies with the traditional irtd and low temp ctr-80 bath or ltr-90 dry well. the small and fexible sensor of the logger allows a usage in most of the pharma applications and it can also be used in combination with very small vials. valprobe satisfes fda regulation 21 cfr part 11 requirements for electronic signatures and records and complies with en 554 for saturated steam sterilization. features ? temperature range for complete logger: -85c to 140c ? battery life: 3x better than standard valprobe logger ? 1 m long and 1.8 mm thin robust fexible sensor with 2.2 mm tefon tip applications ? cryogenic vessels ? freeze dryer ? freezers ? incubators ? warehouses ? sterilizers/autoclaves
aas-920-650c 08/2016 www.amphenol-sensors.com ? 2016 amphenol corporation. all rights reserved. specifcations ar e subject to change without notice. other company names and product names used in this document are the registered trademarks or trademarks of their respective owners. a mphenol advanced sensors data loggers specifcations sensing element precision platinum rtd measurement range and accuracy 0?c to 140?c, -85?c to 0?c, 0.1?c 0.25?c environmental temperature humidity pressure -85?c to 140?c 0% to 100% humidity, condensing 0 to 5 bar absolute (0 to 130 psia) logger material 316l stainless steel logger base dimensions 1 13/16 in. x 1 3/8 in. diameter (46 mm x 35 mm) battery field-replaceable 3.6 v lithium thionyl chloride sampling rate 1 second to 12 hours data storage 10,000 samples retained in non-volatile eeprom memory calibration factory calibrated (nvlap/dakks accredited) with user calibration capability real time clock accuracy 15 seconds per 24 hours (0.0174%) sensor flexible tefon cable total length (sensor + cable) 40 in. (100 cm) cable diameter 0.07 in. (1.8mm) tefon tip length: 1 in. (25mm) diameter: 0.087 in. (2.2mm) part number XCFVP-40
|
