technical data sheet adaptor sma plug C tnc 50 w plug 32S156-S00L5 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/12.04/3.0 all dimensions are in mm; tolerances according to i so 2768 m-h interface according to sma side: iec 60169-15; en 1221 10; mil-std-348 tnc side: iec 60169-17, m il-prf-39012, din en 122200 documents n/a material and plating connector parts material plating center contact brass aurodur?, gold plated outer contact sma side cube or equivalent aurodur?, gold plated outer contact tnc side brass nickel, 2.5-5 m dielectric ptfe gasket silicone coupling nut sma side cube or equivalent gold, 0.1 m
technical data sheet adaptor sma plug C tnc 50 w plug 32S156-S00L5 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 f(ghz) electrical data impedance 50 w frequency dc to 10 ghz vswr 1.05 + 0.005 x f [ghz] insertion loss 0.04 x db insulation resistance 3 5 x10 3 m w center contact resistance 3 m w , sma side 1.5 m w , tnc side outer contact resistance 2 m w , sma side 1 m w , tnc side test voltage 1000 v rms working voltage 480 v rms power handling (at 20 c, sea level, vswr 1.0) 80 w @ 2 ghz mechanical data sma side tnc side mating cycles min. 500 min. 500 coupling nut retention 3 270 n 3 445 n center contact captivation: axial 3 27 n 3 27 n coupling test torque max. 1.7 nm max. 1.7 nm recommended torque 0.8 nm to 1.1 nm 0.46 nm to 0.6 9 nm environmental data temperature range -65c to +165c thermal shock mil-std-202, meth. 107, cond. b corrosion mil-std-202, meth. 101, cond. b vibration mil-std-202, meth. 204, cond. d shock mil-std-202, meth. 213, cond. i moisture resistance mil-std-202, meth. 106 rohs compliant tooling n/a suitable cables n/a weight weight 17.2 g/pce draft date approved date rev. engineering change n umber name date rong fang 21/09/04 j_krautenbacher 21.07.16 h00 15 -1629 i_wallner 21.07.16 while the information has been carefully compiled t o the best of our knowledge, nothing is intended as representation or warranty o n our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judg ed to be necessary.
|