885014 2332.5 mhz baw filter data sheet: rev c 11- 09 - 15 - 1 of 6 - disclaimer: subject to change without notice ? 2015 triquint www.triquint.com ?/?www.qorvo.com rfmd + triquint = qorvo csp- 1713, 1.7 x 1.3 x 0.46 mm top view product features ? temperature-compensated bandpass filter ? enables coexistence of sdars and wcs radios ? low loss in full sdars radio channel 23 20 -2345 mhz band ? high rejection in the 2305-2315 mhz band: wcs lower ? high rejection in 2350- 23 55? mhz band: wcs upper ? industry-leading small size: 1.7 x 1.3 x .46 mm ? + ? 24 dbm (cw) power handling (min) ? performance across - ?40 to +? 105 ? oc ? operable to + ? 125 oc ? single-ended operation ? ceramic chip-scale package (csp) ? hermetically sealed package rohs compliant, pb-free functional block diagram applications ? satellite radio antenna modules ? satellite radio devices ? suitable for automotive applications - compliant to the aec-q200 grade 2 reliability standard pin no. label 9 input 6 output 7, 8 ground 1,2,3,4,5,7,8, 10 ground (1) 1. see pg 3 for ground considerations pin configuration C single ended eeended./bal-b general description 885014 is a high-performance, high-power bulk acoustic wave (baw) filter with extremely steep skirts and a 25 mhz pass band. 885014 is specifically designed to enable coexistence of sdars and wcs signals within the same device or in close proximity to one another. the part passes the entire sdars band, covering 2320-2345 mhz. the 885014 uses advanced and inexpensive packaging techniques to achieve an industry-leading 1.7 x 1.3 x .46 mm package. the filter exhibits excellent power handling capabilities. part no. description 885014 product description 885014- evb -2 evaluation board description p g3 standard t/r size = 10, 000 units/reel ordering information 6 7 8 9 5 10 3 2 1 4 downloaded from: http:///
885014 2332.5 mhz baw filter data sheet: rev c 11- 09 - 15 - 2 of 6 - disclaimer: subject to change without notice ? 2015 triquint www.triquint.com ?/?www.qorvo.com rfmd + triquint = qorvo electrical specifications (1 ,3 ) test conditions unless otherwise noted: temp= ??40?c to + ?105? c (2,3) parameter conditions min typ? (2) max ? units center frequency fc of rf filter - 2332.5 - mhz maximum insertion loss 2320.000 C 2345.000 mhz - 5.0 7.0 db passband 3.0?db bandwidth fc = 2332.5 mhz - 31 - mhz amplitude ripple pb1 pb2 pb3 pb4 pb5 pb6 pb7 pb8 pb9 2320.000 C 2324.500 mhz (tdm1) 2324.200 C 2328.000 mhz (cofdm) 2328.000 C 2332.500 mhz (tdm2) 2332.500 C 2334.385 mhz (sat1a) 2334.385 C 2336.250 mhz (sat2a) 2336.250 C 2337.750 mhz (terra) 2337.750 C 2341.250 mhz (terrb) 2341.250 C 2343.125 mhz (sat2b) 2343.125 C 2345.000 mhz (sat1b) - 1.1 0.4 0.4 0.4 0.4 0.2 0.3 0.5 1.1 1.7 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.4 db p-p ? group delay ripple pb1 pb2 pb3 pb4 pb5 pb6 pb7 pb8 pb9 2320.000 C 2324.500 mhz (tdm1) 2324.200 C 2328.000 mhz (cofdm) 2328.000 C 2332.500 mhz (tdm2) 2332.500 C 2334.385 mhz (sat1a) 2334.385 C 2336.250 mhz (sat2a) 2336.250 C 2337.750 mhz (terra) 2337.750 C 2341.250 mhz (terrb) 2341.250 C 2343.125 mhz (sat2b) 2343.125 C 2345.000 mhz (sat1b) - 15 10 10 5 5 8 10 5 5 70 70 70 60 60 70 70 60 60 ns p-p input return loss output return loss 2320 C 2345 mhz 6 6 13.3 10.8 - - db relative attenuation ? (4) (fm) - - - (wcs a-lower) (wcs b-lower) (wcs b-lower) (6) (wcs a-upper) (wcs b-upper) - 88 C 108 mhz 880 C 960 mhz 1710 C 1910 mhz 2000 C 2100 mhz 2305 C 2310 mhz 2310 C 2315 mhz (- 40 to +85?c) 2310 C 2315 mhz (+85 to +105? c) 2350 C 2355 mhz 2355 C 2360 mhz 2400 C 2500 mhz 36 20 20 20 16 4 3.5 4 16 20 58 39 36 36 21 6 4 11 28 38 - dbc input and output impedance (5) - 50 - ? notes: 1. all specifications are based on the triquint schematic for refe rence design shown on page 3. 2. typical values are based on average measurements at +?25?c. 3. in production, devices will be tested at room temperature to a gua rd-banded specification; this limit is based on average performance over temperature. 4. attenuation is defined from the insertion loss level measured at the center frequency fc. 5. this is the optimum impedance in order to achieve the perform ance shown. 6. extended temperature de -rated specification as noted. downloaded from: http:///
885014 2332.5 mhz baw filter data sheet: rev c 11- 09 - 15 - 3 of 6 - disclaimer: subject to change without notice ? 2015 triquint www.triquint.com ?/?www.qorvo.com rfmd + triquint = qorvo absolute maximum ratings parameter rating storage temperature (1) - ? 40 to + ?12 5 ? c operable temperature (2) - ? 40 to +125 ? c rf input power (3) + ? 24 dbm 1. operation of this device outside the parameter ranges given may cause permanent damage 2. specifications are not guaranteed over all operable conditions 3. input power with applied cw signal equivalent to + ? 55c for 10k hours 885014 reference design top view zoomed in 1,2,3,4,7,8 9 6 50 50 ? ? 9.1nh 5 10 0.4pf notes: 1. impedance matching required (series tank) 2. trace width nominal 50 ohms 3. pcb: .580 x.580 x .062; construction (5 layer stack-up): ? oz cu top layer; diel ectric: taconic tly-5a (.0075); ? oz cu middle layer, fr4; ? oz cu bottom layer; total thickness (0.062) (dim ensions are in inches). contact triquint for gerber files bill of material C 885014-evb design reference des. value description manuf. part number u1 n/a csp 1713, 2332.5 ? mhz baw filter triquint fl 885014 l1 9.1 ? nh 0201 chip inductor, +/- 3% murata lqp03tn9n1h 02 c1 0.4 ? pf 0105 chip cap, +/- 0.04 ? pf murata grm0225c1cr40bd05d sma n/a sma connector radiall usa . 9602 - 1111 - 018 pcb n/a pc board multiple 961064 pcb mounting pattern 0.15 1.63 0.295 0.54 0.64 0.325 1.24 0.15 0.29 notes: 1. all dimensions are in millimeters. angles are in degrees. 2. this drawing specifies the mounting pattern used on the triquin t evaluation board for this product. some modification may be nece ssary to suit end user assembly materials and processes. downloaded from: http:///
885014 2332.5 mhz baw filter data sheet: rev c 11- 09 - 15 - 4 of 6 - disclaimer: subject to change without notice ? 2015 triquint www.triquint.com ?/?www.qorvo.com rfmd + triquint = qorvo performance plots - reference design test conditions unless otherwise noted: temp= + ? 25 ? c downloaded from: http:///
885014 2332.5 mhz baw filter data sheet: rev c 11- 09 - 15 - 5 of 6 - disclaimer: subject to change without notice ? 2015 triquint www.triquint.com ?/?www.qorvo.com rfmd + triquint = qorvo package information, marking and dimensions 0.46 nom. 0.50 max. 0.24 1.54 1.70 0.55 0.205 0.45 0.20 1.15 1.30 0.235 0.24 code marking date code m 19 id dot wwy mfg site package style: csp-1713 dimensions: 1.70 x 1.30 x 0.46 mm body: al 2 o 3 ceramic lid: kovar or alloy 42 , au over ni plated terminations: au plating 0.5 - 1.0 ?m, over a 2 -6 ? m ni plating all dimensions shown are nominal in millimeters all tolerances are ? 0.15 ? mm except overall length and width ? 0.10 ? mm notes: 1. all dimensions shown are typical in millimeters 2. an asterisk (*) in front of the marking code indicates prototype. tape and reel information standard t/r quantity = 10,000 units/reel a a b b 1.75 4.0 4.0 2.0 8.0 3.50 0.60 1.5 section a-a section b-b 0.63 0.250 5 max. typ. 1.47 1.88 8.8 id dot 2.0 direction of travel ?330 ?20.2 ?13.0 ?102 2.7 downloaded from: http:///
885014 2332.5 mhz baw filter data sheet: rev c 11- 09 - 15 - 6 of 6 - disclaimer: subject to change without notice ? 2015 triquint www.triquint.com ?/?www.qorvo.com rfmd + triquint = qorvo product compliance information esd sensitivity ratings caution! esd-sensitive device esd rating: class 1c test human body model (hbm) standard esda/jedec js - 001 esd rating: class c3 test: charge device model (cdm) standard: esda/jedec jes-002 solderability compatible with both lead-free (260c maximum reflow temperature) and tin/lead (245c maximum reflow temperature) soldering processes. refer to soldering profile for recommended guidelines. rohs compliance this part is compliant with eu 2002/95/ec rohs directive (restrictions on the use of certain hazardous substances in electrical and electronic equipment). this product also has the following attributes: ? lead free ? halogen free (chlorine, bromine) ? antimony free ? tbbp-a (c 15 h 12 br 4 0 2 ) free ? pfos free ? svhc free msl rating not applicable. hermetic package. contact information for the latest specifications, additional product information, worldwide sales and di stribution locations, and information about triquint: web: www.triquint.com tel: +1.407.886.8860 email: info-sales@tqs.com fax: +1.407.886.7061 for technical questions and application information: email: flapplication.engineering@tqs.com important notice the information contained herein is believed to be reliable. triquint mak es no warranties regarding the information contained herein. triquint assumes no responsibility or liability wh atsoever for any of the information contained herein. triquint assumes no responsibility or liability whatsoever for the use of the information contained herein. the information contained herein is provided "as is, where is" and with al l faults, and the entire risk associated with such information is entirely with the user. all information contained herein is subject to change without notice. customers should obtain and verify the latest relevant information before placing orders for triquint products. the information contained herein or any use of such information does not grant, explici tly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to suc h information itself or anything described by such information. triquint products are not warranted or authorized for use as critical components in medical, life-saving, or life- sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. downloaded from: http:///
|
