qpp 2209 8 ? C ? 12 ghz 40 w vpin limiter data sheet rev. c , july 2019 | subject to change without notice 1 of 8 www.qorvo.com ? 20 l 4 ? x ? 4 ? mm ovm qfn package key features ? frequency range: 8 to 12 ghz ? insertion loss: < 0.5 db ? peak power handling: 40 w (pulsed) ? flat leakage: < 19 dbm ? spike leakage < 20.5 dbm ? passive (no dc bias required) ? recovery time < 30 ns ? package dimensions: 4.00 x 4.00 x 0. 85 mm performance is typical across frequency. please reference electrical specification table and data plots for more details. product overview qorvo's QPP2209 is a high power vpin limiter robust to short-pulse input signals up to 40w. it offers exceptionally low insertion loss over a wide bandwidth and requires no dc bias. the QPP2209 is housed in a low-cost plastic over-molded qfn package. the QPP2209 is internally matche d to 50 ohms and operates from 8 to 12 ghz with typical insertion loss less than 0.5db and flat leakage below 19dbm. it is capable of withstanding 40w of incident power under short-pulse conditions. it is well suited for both commercial and defense related applications. lead -free and rohs compliant. functional block diagram top view applications ? receive chain protection ? commercial and military radar ordering information part description QPP2209tr7 8 C 12 ghz 40w vpin limiter, 500 pcs, 7-inch reel QPP2209tr7x 8 C 12 ghz 40w vpin limiter, 50 pcs, 7-inch reel QPP2209evb 01 evaluation board downloaded from: http:///
QPP2209 8 ?C? 12 ghz 40 w vpin limiter data sheet rev. c , july 2019 | subject to change without notice 2 of 8 www.qorvo.com ? absolute maximum ratings parameter rating incident power, pulsed 1 , 50 ? , 25 c 46 dbm incident power, pulsed 1 , 50 ? , 85 c 46 dbm incident power, cw, 50 ? , 25 c 37 dbm incident power, cw, 50 ? , 85 c 34 dbm mounting temperature (30 s max) 260 c storage temperature -40 to 150 c note: 1 pulse conditions: pw = 100 us, duty cycle = 10% exceeding any one or a combination of the absolute maximu m rating conditions may cause permanent damage to the device. ext ended application of absolute maximum rating conditions to the devic e may reduce device reliability. electrical specifications parameter conditions ? (1) min typ. max units operational frequency range 8.0 12.0 ghz insertion loss 8 ghz 10 ghz 12 ghz 0.32 0.35 0.47 db input return loss 8 ghz 10 ghz 12 ghz 25 21 15 db output return loss 8 ghz 10 ghz 12 ghz 30 21 15 db flat leakage power at p in > 30 dbm (pulse) 8 ghz 10 ghz 12 ghz 18.2 18.0 18. 2 dbm pulse recovery time <30 ns spike leakage 20.5 dbm insertion loss temperature coefficient 0.004 db/ c notes: 1. test conditions unless otherwise noted: temp?=?+25?c, 50? sy stem. s-parameter cw, power pulse parameters: pw= 100us, duty cycle = 10% recommended operating conditions parameter min typ max units passive C no bias temperature range - 40 +25 +85 c electrical specifications are measured at specified test cond itions. specifications are not guaranteed over all recommended operating conditions. thermal and reliability information parameter test conditions value units incident power (rf operational life test (1) ) 10 ghz pulsed, pw=100 us, dc=10%, 50 ? , 25 c 40 w notes: 1. test terminated after 100 hours. downloaded from: http:///
QPP2209 8 ?C? 12 ghz 40 w vpin limiter data sheet rev. c , july 2019 | subject to change without notice 3 of 8 www.qorvo.com ? performance plots C small signal test conditions unless otherwise noted: temp.=+25 ? c , cw -3.0 -2.5 -2.0 -1.5 -1.0 -0.5 0.0 4 5 6 7 8 9 10 11 12 13 14 15 16 insertion loss (db) frequency (ghz) insertion loss vs. frequency vs. temp. -40 c +25 c +85 c -30 -25 -20 -15 -10 -5 0 4 5 6 7 8 9 10 11 12 13 14 15 16 input return loss (db) frequency (ghz) input return loss vs. freq. vs. temp. -40 c +25 c +85 c -30 -25 -20 -15 -10 -5 0 4 5 6 7 8 9 10 11 12 13 14 15 16 output return loss (db) frequency (ghz) output return loss vs. freq. vs. temp. -40 c +25 c +85 c downloaded from: http:///
QPP2209 8 ?C? 12 ghz 40 w vpin limiter data sheet rev. c , july 2019 | subject to change without notice 4 of 8 www.qorvo.com ? performance plots C large signal test conditions unless otherwise noted: pulsed rf: pw = 100us, dc = 10%; temp.=+25 ? c 12 13 14 15 16 17 18 19 20 30 32 34 36 38 40 42 44 46 output power (dbm) input power (dbm) output power vs. input power vs. freq. 6 ghz 7 ghz 8 ghz 9 ghz 10 ghz 11 ghz 12 ghz 13 ghz 14 ghz pulsed rf: pw = 100us, dc = 10% 15 16 17 18 19 20 30 32 34 36 38 40 42 44 46 output power (dbm) input power (dbm) output power vs. input power vs. temp. -40 c +25 c +85 c frequency = 10 ghz pulsed rf: pw = 100us, dc = 10% 0 2 4 6 8 10 12 14 16 18 20 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 output power (dbm) input power (dbm) output power vs. input power vs. freq. 6 ghz 7 ghz 8 ghz 9 ghz 10 ghz 11 ghz 12 ghz 13 ghz 14 ghz temp. = 25 c cw 12 13 14 15 16 17 18 19 20 30 31 32 33 34 35 36 37 output power (dbm) input power (dbm) output power vs. input power vs. freq. 8 ghz 9 ghz 10 ghz 11 ghz 12 ghz temp. = 25 c cw 0 2 4 6 8 10 12 14 16 18 20 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 output power (dbm) input power (dbm) output power vs. input power vs. temp. -40 c +25 c +85 c frequency = 10 ghz cw 15 16 17 18 19 20 30 31 32 33 34 35 36 37 output power (dbm) input power (dbm) output power vs. input power vs. temp. -40 c +25 c +85 c frequency = 10 ghz input power is limited to 34 dbm @ 85 c cw downloaded from: http:///
QPP2209 8 ?C? 12 ghz 40 w vpin limiter data sheet rev. c , july 2019 | subject to change without notice 5 of 8 www.qorvo.com ? evaluation board pcb information application circuit and evaluation board (evb) and mounting detail notes: 1. see evaluation board pcb information for material and stack up. downloaded from: http:///
QPP2209 8 ?C? 12 ghz 40 w vpin limiter data sheet rev. c , july 2019 | subject to change without notice 6 of 8 www.qorvo.com ? package marking, p ad configuration and description pad no. label description 1, 2, 4 C 12 , 14 C 20 nc no connection; may be grounded if desired 3 rf input rf input, matched to 50 ohms, not dc blocked 13 rf output rf output, matched to 50 ohms, not dc blocked 21 (slug) gnd on pcb, multiple copper-filled vias should be employed under the center pad to minimize inductance and thermal resistance note: the rf input and rf output ports are not interchangeable. downloaded from: http:///
QPP2209 8 ?C? 12 ghz 40 w vpin limiter data sheet rev. c , july 2019 | subject to change without notice 7 of 8 www.qorvo.com ? solderability 1. compatible with the latest version of j-std-020, lead-free solder, 260 c. 2. the use of no-clean solder to avoid washing after soldering is recommended. 3. contact plating: ni- pd - au recommended soldering profile downloaded from: http:///
QPP2209 8 ?C? 12 ghz 40 w vpin limiter data sheet rev. c , july 2019 | subject to change without notice 8 of 8 www.qorvo.com ? handling precautions parameter rating standard caution! esd -sensitive device esd?C?human body model (hbm) tbd esda?/?jedec js - 001 -2012 esd?C?charged device model ( cd m) tbd jedec jesd22-c101f msl?C?moisture sensitivity level lev el 3 ipc/jedec j-std- 020 important notice the information contained herein is believed to be reli able; however, qorvo makes no warranties regarding the informa tion contained herein and assumes no responsibility or liability whatsoe ver for the use of the information contained herein. all infor mation contained herein is subject to change without notice. customers shoul d obtain and verify the latest relevant information before pl acing orders for qorvo products. the information contained herein or any u se of such information does not grant, explicitly or imp licitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anythin g described by such information. this information does not constitute a warranty with respect to the products described herein, and qorvo hereby disclaims any and all warranties with respect to such products whether express or implied by law, course of dealing, course of performance, usage of trade or otherwise, including the implied warranties of merchantability and fitness for a particular purpose. without limiting the generality of the foregoing, qorvo pro ducts are not warranted or authorized for use as critical compo nents in medical, life-saving, or life-sustaining applications, or other appl ications where a failure would reasonably be expected to cause severe personal injury or death. copyright 2019 ? qorvo, inc. | qorvo is a registered trademark of qorvo, in c. rohs compliance this part is compliant with 2011/65/eu rohs directive (restrictions on the use of cert ain hazardous substances in electrical and electronic equipment) as amended by directive 2015/863/eu. this product also has the following attributes: ? lead free ? halogen free (chlorine, bromine) ? antimony free ? tbbp-a (c 15 h 12 br 4 0 2 ) free ? pfos free ? svhc free contact information for the latest specifications, additional product information, worl dwide sales and distribution locations: web: www.qorvo.com tel: 1- 844 -890-8163 email: customer.support@qorvo.com downloaded from: http:///
|
