|
|
|
MAXIM[Maxim Integrated Products]
|
Part No. |
MAX2041EVKIT MAX2041 MAX20411
|
OCR Text |
...to select LO2. Observe that the 201MHz signal increases while the 200MHz decreases. Reconfigure the test setup using a combiner or hybrid to sum the two LO inputs to do a two-tone IP3 measurement if desired. Terminate the unused LO input in... |
Description |
Evaluation Kit
|
File Size |
183.15K /
7 Page |
View
it Online |
Download Datasheet |
|
|
|
MAXIM[Maxim Integrated Products]
|
Part No. |
MAX2043_1 MAX2043 MAX2043EVKIT MAX20431
|
OCR Text |
...o observe the IF output tone at 201MHz. The level should be about -10.5dBm (7.5dB conversion loss, 3dB pad loss). The spectrum analyzer's absolute magnitude accuracy is typically no better than 1dB. Use the power meter to get an accurate ou... |
Description |
Evaluation Kit
|
File Size |
186.85K /
7 Page |
View
it Online |
Download Datasheet |
|
|
|
Ecliptek, Corp.
|
Part No. |
EMK13G2H-19.201M
|
OCR Text |
...le 50 5(%) nominal frequency 19.201mhz output control function tri-state (disabled output: high impedance) electrical specifications nominal frequency 19.201mhz frequency tolerance/stability 100ppm maximum over -40c to +85c (inclusive of al... |
Description |
OSCILLATORS 100PPM -40 85 3.3V 4 19.201MHZ TS CMOS 5X7 4PAD SMD CRYSTAL OSCILLATOR, CLOCK, 19.201 MHz, LVCMOS OUTPUT
|
File Size |
166.23K /
5 Page |
View
it Online |
Download Datasheet |
|
|
|
RF MICRO DEVICES INC
|
Part No. |
SRF-1016Z
|
OCR Text |
...lo input=0dbm, 200mhz, if input=201mhz caution! esd sensitive device. exceeding any one or a combination of the absolute maximum rating conditions may cause permanent damage to the device. extended application of absolute maximum ratin... |
Description |
TELECOM, CELLULAR, BASEBAND CIRCUIT, PDSO16
|
File Size |
190.90K /
8 Page |
View
it Online |
Download Datasheet |
|
|
|
http:// MAXIM[Maxim Integrated Products]
|
Part No. |
MAX2041ETP-T MAX2041ETP MAX2041ETPT MAX2041ETP_ MAX2041
|
OCR Text |
...wo tones: fIF1 = 200MHz, fIF2 = 201MHz, PIF = 0dBm/tone, fLO = 1900MHz, PLO = 0dBm LO - 2IF LO + 2IF LO - 3IF LO + 3IF POUT = 0dBm CONDITIONS MIN TYP 23.3 MAX UNITS dBm
Input Third-Order Intercept Point
IIP3
33.5
dBm
LO 2IF ... |
Description |
High-Linearity, 1700MHz to 3000MHz Upconversion / Downconversion Mixer with LO Buffer / Switch
|
File Size |
392.19K /
16 Page |
View
it Online |
Download Datasheet |
For
20.1mhz Found Datasheets File :: 8 Search Time::1.016ms Page :: | <1> | |
▲Up To
Search▲ |
|
Price and Availability
|