|
|
|
RECOM Electronic GmbH DICON FIBEROPTICS INC
|
Part No. |
MT-C-O-13-40-F-PMN-4B-N-1 MT-C-O-16-40-F-PMF-4B-FC-X
|
OCR Text |
...able in both cylindrical and 14-pin dip packages applications mems attenuators are used for distributed power equalization within oadms, mux/dmuxes, band equalizers, channel equalizers, optical cross-connects, line cards and transponders. p... |
Description |
FIBER OPTIC VARIABLE ATTENUATOR, 1280-1330nm, 40-PANEL MOUNT FIBER OPTIC VARIABLE ATTENUATOR, 1570-1610nm, 40-PANEL MOUNT, FC/SPC CONNECTOR
|
File Size |
164.88K /
2 Page |
View
it Online |
Download Datasheet |
|
|
|
SANYO
|
Part No. |
LA8580W
|
OCR Text |
...nt isrc default mode (addresses 4b and 7f: bit d = 0) 20 a sink current isnk (addresses 4b and 7f: bit d = 1) 100 a
block diagram no...pin 5) control, osc-sw control, mic-att control, pa-cnt (pin 4) control (2) when no states are chang... |
Description |
Telephone and Facsimile ICs: I/O switching and signal processing for telephone/facsimile units, compander
|
File Size |
1,180.82K /
26 Page |
View
it Online |
Download Datasheet |
|
|
|
CONSUMER MICROCIRCUITS LIMITED
|
Part No. |
FX365C
|
OCR Text |
...e pulse on this pin (see figure 4b). d 5 /serial enable 1: data input d 5 (parallel mode); serial enable 1 (serial mode). a logic l applied to this input, together with a logic 0 applied to d 4 /serial enable 2, will put the device into ... |
Description |
CTCSS Encoder/Decoder
|
File Size |
65.97K /
8 Page |
View
it Online |
Download Datasheet |
|
|
|
SGS Thomson Microelectronics
|
Part No. |
AN495
|
OCR Text |
...ed in diagrams fig. 4a and fig. 4b: - fig. 4a shows the voltage, on +vs (ch1) and vreg (ch2), at turn-on and turn-off edges, without the filter capacitor on pin 6. - fig. 4b shows the same signals but with 4.7 nf capacitor connected between... |
Description |
EFFECTIVE FILTERING OF TDE1707
|
File Size |
47.52K /
5 Page |
View
it Online |
Download Datasheet |
|
|
|
SGS Thomson Microelectronics
|
Part No. |
AN1484
|
OCR Text |
...y windings figure 4a and figure 4b show the drain voltage of the viper12 (trace 1) and vdd voltage before r2 (trace 2) at full load and in s...pin: table 4: viper12a vdd with an optimized transformer conditions 100v 380v standby 12v 11v load 6... |
Description |
VIPOWER: A 3.6 WATTS TRAVEL ADAPTOR USING VIPER12A
|
File Size |
317.59K /
11 Page |
View
it Online |
Download Datasheet |
|
|
|
NEC Corp.
|
Part No. |
UPD168001MC-6A4-A
|
OCR Text |
...ow. v m v dd in1a to 4a in1b to 4b out1a to 4a out1b to 4b sel function table (common to all channels) input output in1a to in4a in1b to in4...pin voltage may be exceeded by the voltage applied to the load, be sure to connect a schottky barrie... |
Description |
MONOLITHIC 4-CHANNEL H BRIDGE LOW-SIDE SWITCH
|
File Size |
134.98K /
20 Page |
View
it Online |
Download Datasheet |
|
Price and Availability
|