vishay siliconix dg2723 document number: 68767 s-81490-rev. a, 30-jun-08 www.vishay.com 1 700 mhz, - 3 db bandwidth; dual spdt analog switch features ? wide operation voltage range ? low on-resistance, 7 (typical at 3 v) ? low capacitance, 5.6 pf (typical) ? - 3 db high bandwidth with 5pf load: 700 mhz (typical) ? low bit to bit skew: 40 ps (typical) ? low power consumption ? low logic threshold: v ? power down protection: d+/d- pins can tolerate up to 5 v when v+ = 0 v ? logic (s+ and s-) above v+ tolerance ? 8 kv esd protection (hbm) ? latch-up current 300 ma per jesd78 ? lead (pb)-free low profile miniqfn-10 (1.4 mm x 1.8 mm x 0.55 mm) applications ? cellular phones ? portable media players ?pda ? digital camera ?gps ? notebook computer ? tv, monitor, and set top box description dg2723 is a low r on , high bandwidth analog switch configured in dual spdt. it achieves 7 switch on resistance, greater than 700 mhz - 3 db bandwidth with 5 pf load, and a channel to channel crosstalk and isolation at - 49 db. fabricated with high density sub micro cmos process, the dg2723 provides low parasitic capacitance, handles bidirectional signal flow with minimized phase distortion. guaranteed 1.3 v logic high threshold makes it possible to interface directly with low voltage mcus. the dg2723 is designed for a wide range of operating voltages from 2.7 v to 4.3 v that can be driven directly from one cell li-ion battery. on-chip protection circuit protects again fault events when signals at ?com? pins goes beyond v+. latch up current is 300 ma, as per jesd78, and its esd tolerance exceeds 8 kv. packaged in ultra small miniqfn-10 (1.4 mm x 1.8 mm x 0.55 mm), it is ideal for portable high speed mix signal switching application. as a committed partner to the community and the environment, vishay siliconix m anufactures this product with lead (pb)-free device termination. the miniqfn-10 package has a nickel-palladium-gold device termination and is represented by the lead (pb)-free "-e4" suffix to the ordering part number. the nickel-palladium-gold device terminations meet all jedec standards for reflow and msl rating. as a further sign of vishay silicon ix's commitment, the dg2723 is fully rohs complaint. functional block diagram and pin configuration 1 2 top v ie w g n d v + s- hsd2- s+ hsd2+ d- hsd1- miniqfn-10l 10 9 3 5 4 8 pin 1: lo n g lead d+ hsd1+ 1 7 6 2 rohs compliant
www.vishay.com 2 document number: 68767 s-81490-rev. a, 30-jun-08 vishay siliconix dg2723 notes: a. signals on s+, s-, d, hsd1, hsd2 exceeding v+ will be clamp ed by internal diodes. limit forw ard diode current to maximum c urrent ratings. b. all leads welded or soldered to pc board. c. derate 2.6 mw/c above 70 c. ordering information temp. range package part number - 40 c to 85 c miniqfn-10 DG2723DN-T1-E4 truth table s+ (pin 8) s- (pin 10) function x 0 d- = hsd1- x 1 d- = hsd2- 0 x d+ = hsd1+ 1 x d+ = hsd2+ pin descriptions pin name description s+ select input for d+ s- select input for d- hsd1, hsd2, d data port absolute maximum ratings t a = 25 c, unless otherwise noted parameter limit unit reference to gnd v+ - 0.3 to 5.0 v s+, s-, d, hsd1, hsd2 a - 0.3 to (v+ + 0.3) current (any terminal except s+, s-, d, hsd1, hsd2) 30 ma continuous current (s+, s-, d, hsd1, hsd2) 250 peak current (pulsed at 1 ms, 10 % duty cycle) 500 storage temperature (d suffix) - 65 to 150 c power dissipation (packages) b miniqfn-10 c 208 mw esd (human body model) i/o to gnd 8 kv latch-up (current injection) 300 ma specifications v+ = 3.0 v parameter symbol test conditions otherwise unless specified temp. a limits - 40 c to 85 c unit min. b typ. c max. b analog switch analog signal range d v analog r ds(on) full 0 v+ v on-resistance r ds(on) v+ = 3.0 v, i d = 8 ma, v hsd1/2 = 0.4 v room 7 8 full 9 on-resistance match d r on v+ = 3.0 v, i d = 8 ma, v hsd1/2 = 0.4 v room 0.8 on-resistance resistance flatness d r on flatness v+ = 3.0 v, i d = 8 ma, v hsd1/2 = 0.0 v, 1.0 v room 2.0 switch off leakage current i (off) v+ = 4.3 v, v hsd1/2 = 0.3 v, 3.0 v, v d = 3.0 v, 0.3 v full - 100 100 na channel on leakage current i (on) v+ = 4.3 v, v hsd1/2 = 0.3 v, 4.0 v, v d = 4.0 v, 0.3 v full - 200 200 digital control input voltage high v inh v+ = 3.0 v to 3.6 v full 1.3 v v+ = 4.3 v full 1.5 input voltage low v inl v+ = 3.0 v to 4.3 v full 0.5 input capacitance c in full 5.6 pf input current i inl or i inh v in = 0 or v+ full - 1 1 a
document number: 68767 s-81490-rev. a, 30-jun-08 www.vishay.com 3 vishay siliconix dg2723 notes: a. room = 25 c, full = as determined by the operating suffix. b. the algebraic convention whereby the most negative value is a minimum and the most pos itive a maximum, is used in this data sheet. c. typical values are for design aid only, not guaranteed nor subject to production testing. d. guarantee by design, not subjected to production test. e. v in = input voltage to perform proper function. f. crosstalk meas ured between channels. stresses beyond those listed under ?absolute maximum ratings? may cause permanent damage to the device. these are stress rating s only, and functional operation of the device at these or any other conditions beyond those indi cated in the operational sections of the specifications is not implied. exposure to absolute maximum rating conditions for extended per iods may affect device reliability. specifications v+ = 3.0 v parameter symbol test conditions otherwise unless specified temp. a limits - 40 c to 85 c unit min. b typ. c max. b dynamic characteristics break-before-make time e, d t bbm v+ = 3.0 v, v d1/2 = 1.5 v, r l = 50 , c l = 35 pf room 5 ns full enable turn-on time e, d t on(en) room 30 full enable turn-off time e, d t off(en) room 25 full charge injection d q inj c l = 1 nf, r gen = 0 , v gen = 0 v room 0.5 pc off-isolation d oirr v+ = 3.0 v to 3.6 v, r l = 50 , c l = 5 pf, f = 240 mhz - 30 db crosstalk d x talk - 45 bandwidth d bw v+ = 3.0 v to 3.6 v, c l = 5 pf, r l = 50 , - 3 db 700 mhz channel-off capacitance d c d1 (off) v+ = 3.3 v, f = 1 mhz 2.5 pf c d2 (off) 2.5 channel-on capacitance d c d (off) 2.5 c d (on) 6.5 channel-to-channel skew d t sk(o) v+ = 3.0 v to 3.6 v, r l = 50 , c l = 5 pf 50 ps skew off opposite transitions of the same output d t sk(p) 20 total jitter d t j 200 power supply power supply range v+ 2.6 4.3 v power supply current i+ v in = 0 v, or v+ full 2 a
www.vishay.com 4 document number: 68767 s-81490-rev. a, 30-jun-08 vishay siliconix dg2723 typical characteristics t a = 25 c, unless otherwise noted r on vs. v d and single supply voltage r on vs. analog voltage and temperature r on vs. analog voltage and temperature 4 6 8 10 12 14 16 1 8 20 22 24 26 2 8 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 v d - analog v oltage ( v ) r o n - on-resistance ( ) v + = 4.3 v t = 25 c i s = 8 ma d1 v + = 3.0 v v + = 2.6 v v + = 3.3 v v + = 3.6 v v d - analog v oltage ( v ) r o n - on-resistance ( ) - 40 c 0 5 10 15 20 25 0 0.5 1 1.5 2 2.5 3 + 8 5 c + 25 c v + = 3.0 v i o n = 8 ma v d - analog v oltage ( v ) r o n - on-resistance ( ) 0 5 10 15 20 25 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 - 40 c + 8 5 c + 25 c v + = 3.6 v i o n = 8 ma r on vs. analog voltage and temperature r on vs. analog voltage and temperature r on vs. analog voltage and temperature v d - analog v oltage ( v ) r o n - on-resistance ( ) 0 5 10 15 20 25 30 0 0.5 1 1.5 2 2.5 3 + 8 5 c + 25 c - 40 c v + = 2.6 v i o n = 8 ma v d - analog v oltage ( v ) r o n - on-resistance ( ) 0 5 10 15 20 25 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 - 40 c + 8 5 c + 25 c v + = 3.3 v i o n = 8 ma v d - analog v oltage ( v ) r o n - on-resistance ( ) 0 5 10 15 20 25 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 v + = 4.3 v i o n = 8 ma - 40 c + 8 5 c + 25 c
document number: 68767 s-81490-rev. a, 30-jun-08 www.vishay.com 5 vishay siliconix dg2723 typical characteristics t a = 25 c, unless otherwise noted supply current vs. input switching frequency switching threshold vs. supply voltage off-isolation, v+ = 3.3 v inp u t s w itching freq u ency (hz) i+ - s u pply c u rrent (a) 10 100 1 k 10 k 100 k 1 m 10 m 10 ma 1 ma 100 a 10 a 1 a 100 na 10 na 1 na 100 pa v + = 2.6 v v + = 3.0 v v + = 3.3 v v + = 3.6 v v + = 4.3 v v + - s u pply v oltage ( v ) v t - s w itching threshold ( v ) 0.50 0.55 0.60 0.65 0.70 0.75 0. 8 0 0. 8 5 0.90 0.95 1.00 1.05 1.10 1.15 1.20 2.5 2.7 2.9 3.1 3.3 3.5 3.7 3.9 4.1 4.3 4.5 v il v ih - 100 - 90 - 8 0 - 70 - 60 - 50 - 40 - 30 - 20 - 10 0 freq u ency (mhz) off isolation (db) 1 10 100 1000 leakage current vs. temperature gain vs. frequency, v+ = 3.3 v crosstalk, v+ = 3.3 v temperat u re (c) leakage c u rrent (pa) 0.1 1 10 100 1000 10 000 - 60 - 40 - 20 0 20 40 60 8 0 100 120 140 v + = 4.3 v i d(off) i d(off) i d(o n ) - 8 - 7 - 6 - 5 - 4 - 3 - 2 - 1 0 freq u ency (mhz) gain (db) 1 10 100 1000 10 000 freq u ency (mhz) crosstalk (db) 1 10 100 1000 - 100 - 90 - 8 0 - 70 - 60 - 50 - 40 - 30 - 20 - 10 0
www.vishay.com 6 document number: 68767 s-81490-rev. a, 30-jun-08 vishay siliconix dg2723 test circuits figure 1. switching time switch input c l (includes fixture and stray capacitance) v+ s hsd1 or hsd2 c l 35 pf d logic input r l 50 v out gnd v+ 50 % 0 v logic input switch output t on t off logic "1" = switch on logic input waveforms inverted for switches that have the opposite logic sense. switch output d r l r l r on 0.9 x v out t r 5 ns t f 5 ns v inh v inl = + < < ( ) v out figure 2. break-before-make interval c l (includes fixture and stray capacitance) hsd2 v hsd1 hsd1 v hsd2 0 v logic input switch output v o hsd1 = hsd2 t r < 5 ns t f < 5 ns 90 % t d t d s d v+ gnd v+ c l 35 pf v o r l 50 v inl v inh figure 3. charge injection off on on in v out v out q = out x c l c l = 1 nf r gen v out d v in = 0 - v+ s gnd v+ v+ in depends on switch configuration: input polarity determined by sense of switch. + hsd1 or hsd2 v gen
document number: 68767 s-81490-rev. a, 30-jun-08 www.vishay.com 7 vishay siliconix dg2723 test circuits vishay siliconix maintains worldwide manufacturing capability. pr oducts may be manufactured at one of several qualified locatio ns. reliability data for silicon technology and package reliability represent a composite of all qualified locations. for related documents such as package/tape drawings, part marking, and reliability data, see http://www.vishay.com/ppg?68767 . figure 4. off-isolation s gnd hsd1 or hsd2 0 v, 2.4 v 10 nf d off isolation 20 log v d v hsd2 or hsd1 r l analyzer v+ v+ = figure 5. channel off/on capacitance hsd1 or hsd2 f = 1 mhz s d gnd 0 v, 2.4 v meter hp4192a impedance analyzer or e q uivalent 10 nf v+ v+
vishay siliconix package information document number: 74496 12-feb-07 www.vishay.com 1 mini qfn-10l case outline dim millimeters inches min. nam. max. min. nam. max. a 0.50 0.55 0.60 0.0197 0.0217 0.0236 a1 0.00 - 0.05 0.000 - 0.002 b 0.15 0.20 0.25 0.006 0.008 0.010 c 0.15 ref 0.006 ref d 1.75 1.80 1.85 0.069 0.071 0.073 e 1.35 1.40 1.45 0.053 0.055 0.057 e 0.40 bsc 0.016 bsc l 0.35 0.40 0.45 0.014 0.016 0.018 l1 0.45 0.50 0.55 0.0177 0.0197 0.0217 ecn t-07039-rev. a, 12-feb-07 dwg: 5957
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
