SE40PB, se40pd, se40pg, se40pj www.vishay.com vishay general semiconductor revision: 10-dec-14 1 document number: 87954 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 surface mount esd capability rectifiers typical applications general purpose, power line po larity protection in both consumer and automotive applications. features ? very low profile - typical height of 1.1 mm ? ideal for automated placement ? oxid planar chip junction ? low forward voltage drop ? esd capability ? meets msl level 1, per j-std-020, lf maximum peak of 260 c ? aec-q101 qualified available ? - automotive ordering code: base p/nhm3 ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 mechanical data case: to-277a (smpc) molding compound meets ul 94 v-0 flammability rating base p/n-m3 - halogen-free, rohs-compliant, and commercial grade ? base p/nhm3 - halogen-free, rohs-compliant and aec-q101 qualified ? base p/nhm3_x - halogen-fr ee, rohs-compliant and aec-q101 qualified ? (_x denotes revision code e.g. a, b,.....) terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 ? m3 suffix meets jesd 201 class 1a whisker test, hm3 suffix meets jesd 201 class 2 whisker test notes (1) mounted on 14 mm x 14 mm pad areas, 2 oz. fr4 pcb (2) free air, mounted on recommended copper pad area primary characteristics package to-277a (smpc) i f(av) 4.0 a v rrm 100 v to 600 v i fsm 60 a i r 10 a v f at i f = 4.0 a, (125 c) 0.91 v t j max. 175 c diode variatio ns single die to-277a ( s mpc) anode 1 anode 2 cathode k k 2 1 e s mp ? s eries available maximum ratings (t a = 25 c unless otherwise noted) parameter symbol SE40PB se40pd se40pg se40pj unit device marking code 40b 40d 40g 40j maximum repetitive pe ak reverse voltage v rrm 100 200 400 600 v maximum dc forward current i f (1) 4.0 a i f (2) 2.4 peak forward surge curr ent 10 ms single half ? sine-wave superimposed on rated load i fsm 60 a operating junction and storage temperature range t j , t stg -55 to +175 c
SE40PB, se40pd, se40pg, se40pj www.vishay.com vishay general semiconductor revision: 10-dec-14 2 document number: 87954 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) pulse test: 300 s pulse width, 1 % duty cycle (2) pulse test: pulse width ? 40 ms notes (1) free air, mounted on recommended pcb 1 oz. pad area; thermal resistance r ? ja - junction to ambient (2) units mounted on pcb with 14 mm x 14 mm pad areas, 2 oz. fr4 pcb; r ? jm - junction to mount note (1) aec-q101 qualified electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol typ. max. unit instantaneous forward voltage i f = 2.0 a t a = 25 c v f (1) 0.92 - v i f = 4.0 a 1.00 1.05 i f = 2.0 a t a = 125 c 0.82 - i f = 4.0 a 0.91 0.96 reverse current rated v r t a = 25 c i r (2) 0.1 10 a t a = 125 c 19 150 typical reverse recovery time i f = 0.5 a, i r = 1.0 a, i rr = 0.25 a t rr 2.2 - s typical junction capa citance 4.0 v, 1 mhz c j 28 - pf thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol SE40PB se40pd se40pg se40pj unit typical thermal resistance r ? ja (1) 70 c/w r ? jm (2) 6.6 immunity to electrical static di scharge to the following standards ? (t a = 25 c, unless otherwise noted standard test type test conditions symbol class value aec-q101-001 human body model (contact mode) c = 100 pf, r = 1.5 k ? v c h3b > 8 kv ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode se40pj-m3/86a 0.10 86a 1500 7" diam eter plastic tape and reel se40pj-m3/87a 0.10 87a 6500 13" diam eter plastic tape and reel se40pjhm3/86a (1) 0.10 86a 1500 7" diameter plastic tape and reel se40pjhm3/87a (1) 0.10 87a 6500 13" diameter plastic tape and reel se40pjhm3_a/h (1) 0.10 h 1500 7" diameter plastic tape and reel se40pjhm3_a/i (1) 0.10 i 6500 13" diameter plastic tape and reel
SE40PB, se40pd, se40pg, se40pj www.vishay.com vishay general semiconductor revision: 10-dec-14 3 document number: 87954 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ratings and characteristics curves (t a = 25 c unless otherwise noted) fig. 1 - maximum forward current derating curve fig. 2 - forward power loss characteristics fig. 3 - typical instantaneous forward characteristics fig. 4 - typical reverse leakage characteristics fig. 5 - typical j unction capacitance fig. 6 - typical transient thermal impedance 0 0.4 0.8 1.2 1.6 2 2.4 2.8 3.2 3.6 4 4.4 0 25 50 75 100 125 150 175 average forward rectified current (a) mount temperature (c) t m mea s ured at cathode band terminal pcb mount r thj-m = 6.6 c/w t a = 25 c 0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 4.8 0 0.4 0.8 1.2 1.6 2 2.4 2.8 3.2 3.6 4 4.4 average power lo ss (w) average forward current (a) d = 0.1 d = 0.2 d = 0.3 d = 0.5 d = 1.0 d = 0.8 d = t p /t t t p 0.01 0.1 1 10 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 in s tantaneou s forward current (a) in s tantaneou s forward voltage (v) t a = 150 c t a = 25 c t a = 75 c t a = 125 c t a = 175 c 0.001 0.01 0.1 1 10 100 1000 10 20 30 40 50 60 70 80 90 100 in s tantaneou s rever s e current (a) percent of rated peak rever s e voltage (%) t a = 150 c t a = 125 c t a = 75 c t a = 25 c t a = 175 c 1 10 100 0.1 1 10 100 junction capacitance (pf) rever s e voltage (v) t j = 25 c f = 1.0 mhz v s ig = 50 mv p-p 1 10 100 0.01 0.1 1 10 100 tran s ient thermal impedance ( c/w) t - pul s e duration ( s ) junction to ambient
SE40PB, se40pd, se40pg, se40pj www.vishay.com vishay general semiconductor revision: 10-dec-14 4 document number: 87954 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package outline dimensions in inches (millimeters) conform to jedec ? to-277a to-277a ( s mpc) 0.016 (0.40) 0.006 (0.15) 0.047 (1.20) 0.039 (1.00) 0.146 (3.70) 0.134 (3.40) 0.087 (2.20) 0.075 (1.90) 0.189 (4.80) 0.173 (4.40) 0.049 (1.24) 0.037 (0.94) 0.053 (1.35) 0.041 (1.05) 0.030 (0.75) nom. 0.084 (2.13) nom. 0.155 (3.94) nom. mountin g pad layout 0.268 (6.80) 0.186 (4.72) min. 0.050 (1.27) min. 0.041 (1.04) 0.055 (1.40) min. 0.189 (4.80) min. 0.187 (4.75) 0.175 (4.45) 0.262 (6.65) 0.250 (6.35) 0.242 (6.15) 0.238 (6.05) 0.171 (4.35) 0.167 (4.25) k 2 1
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
