design and specifications are each subject to change without notice. ask factory for the current technical specifications before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors (smd type) a0.2 w l ( ) reference size 0 d0.5 h b0.2 (i) k (p) (i) + ? 0.3 max. pressure relief ( 0 10 and larger) 22 fc j capacitance (f) rated voltage code series identi?cation lot number negative polaritymarking (?) mark for lead-free products (black dot) frequency correction factor for ripple current dimensions marking surface mount type series : fc type : v high temperature lead-free rel ow (suffix : a ? ) category temperature range ?40 c to +105 c rated voltage range 6.3 v.dc to 35 v.dc capacitance range 1 f to 1500 f capacitance tolerance 20 % (120 hz/+20 c) leakage cur rent i < 0.01 cv or 3 (a) after 2 minutes (whichever is greater) dissipation factor (tan ) please see the attached characteristics list characteristics at low temperature v.dc 6.3 10 16 25 35 (impedance ratio at 120 hz) z(?25 c) / z(+20 c) 22222 z(?40 c) / z(+20 c) 33333 endurance after applying rated working voltage for 1000 hours at +105 c2 c and then being stabilizedat +20 c, capacitors shall meet the following limits. capacitance change within 20 % of the initial value tan < 200 % of the initial limit dc leakage current within the initial limit shelf life after storage for 1000 hours at +105 c2 c with no voltage applied and then being stabilized at +20 c, capacitors shall meet the limits speci? ed in endurance.(with voltage treatment) resistance to soldering heat after re? ow soldering and then being stabilized at +20 c, capacitors shall meet the following limits. capacitance change within 10 % of the initial value tan within the initial limit dc leakage current within the initial limit aec-q200 aec-q200 compliant ha fc low impedance size code 0 d l a, b h i w p k b 4.0 5.4 -0.2 4.3 5.5 max. 1.8 0.650.1 1.0 0.35 -0.20 c 5.0 5.4 -0.2 5.3 6.5 max. 2.2 0.650.1 1.5 0.35 -0.20 d 6.3 5.4 -0.2 6.6 7.8 max. 2.6 0.650.1 1.8 0.35 -0.20 e 8.0 6.20.3 8.3 9.5 max. 3.4 0.650.1 2.2 0.35 -0.20 f 8.0 10.20.3 8.3 10.0 max. 3.4 0.900.2 3.1 0.700.2 g 10.0 10.20.3 10.3 12.0 max. 3.5 0.900.2 4.6 0.700.2 +0.1+0.1 +0.1 +0.15+0.15 +0.15 +0.15 frequency (hz) 50, 60 120 1 k 10 k 100 k to correction factor 0.70 0.75 0.90 0.95 1.00 example : 6.3 v.dc 22 f marking color : black (unit : mm) endurance : 105 c 1000 h low impedance (1/2 for ha series) vibration-proof product is available upon request. ( 0 8 mm and larger) rohs compliant features speci cations r. voltage (v.dc) 6.3 10 16 25 35 code j acev mar. 2016 02 downloaded from: http:///
$ o x p l q x p ( o h f w u r o \ w l f & |